Remove interface names from F1 and nFAPI (4G+5G)

doc/F1-design.md

@@ -163,9 +163,7 @@ In the DU file:
   to `127.0.0.3`. This IP address is used as the CU destination IP address for
   F1AP communication.
 
-Note: all `local_*_if_name` parameters are ignored.
-
-Note 2: at the DU, you can bind to different interfaces for F1-C and F1-U with
+Note: at the DU, you can bind to different interfaces for F1-C and F1-U with
 the options `MACRLCs.[0].local_n_address` and
 `MACRLCs.[0].local_n_address_f1u`, respectively. Note that this is not foreseen
 for the CU; in the case of the CU, please use separate CU-UP and CU-CP.

doc/L2NFAPI_NOS1.md

@@ -131,7 +131,6 @@ First verify the nFAPI interface setup on the physical ethernet interface of mac
 MACRLCs = (
         {
         num_cc = 1;
-        local_s_if_name  = "ens3";             // <-- HERE
         remote_s_address = "192.168.122.169";  // <-- HERE
         local_s_address  = "192.168.122.31";   // <-- HERE
         local_s_portc    = 50001;
@@ -199,7 +198,6 @@ L1s = (
         {
         num_cc = 1;
         tr_n_preference = "nfapi";
-        local_n_if_name  = "ens3";            // <- HERE
         remote_n_address = "192.168.122.31";  // <- HERE
         local_n_address  = "192.168.122.169"; // <- HERE
         local_n_portc    = 50000;

doc/L2NFAPI_S1.md

@@ -136,7 +136,6 @@ First verify the nFAPI interface setup on the physical ethernet interface of mac
 MACRLCs = (
         {
         num_cc = 1;
-        local_s_if_name  = "ens3";             // <-- HERE
         remote_s_address = "192.168.122.169";  // <-- HERE
         local_s_address  = "192.168.122.31";   // <-- HERE
         local_s_portc    = 50001;
@@ -204,7 +203,6 @@ L1s = (
         {
         num_cc = 1;
         tr_n_preference = "nfapi";
-        local_n_if_name  = "ens3";            // <- HERE
         remote_n_address = "192.168.122.31";  // <- HERE
         local_n_address  = "192.168.122.169"; // <- HERE
         local_n_portc    = 50000;