maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge remote-tracking branch 'origin/develop' into F1_interop_ACC_n78

Browse Source 
Conflicts:
	openair2/F1AP/f1ap_du_ue_context_management.c
	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_dlsch.c
	openair2/RRC/NR/MESSAGES/asn1_msg.h
	openair2/RRC/NR/rrc_gNB.c
	openair3/ocp-gtpu/gtp_itf.cpp

There were some important conflicts in openair3/ocp-gtpu/gtp_itf.cpp
I rewrote a bit the function Gtpv1uHandleGpdu(). It might have been
done wrongly.
To be tested and fixed if needed.

To redo the merge, if needed:
git checkout 9b2a163ebb
git merge 5ea828e149
This commit is contained in:
Cedric Roux
2022-06-08 15:48:24 +02:00
parent 9b2a163ebb 5ea828e149
commit f71766c3ee
501 changed files with 22474 additions and 14435 deletions
Download Patch File Download Diff File Expand all files Collapse all files
targets/ARCH/COMMON/common_lib.h
+1
View File
@@ -188,6 +188,7 @@ typedef struct {
//! \brief Center frequency in Hz for TX.
//! index: [0..rx_num_channels[ !!! see lte-ue.c:427 FIXME iterates over rx_num_channels
double tx_freq[4];
double tune_offset;
//! \brief memory
//! \brief Pointer to Calibration table for RX gains
rx_gain_calib_table_t *rx_gain_calib_table;
targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
+25 -10
View File
@@ -644,6 +644,7 @@ static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp
break;
case USRP_X300_DEV:
case USRP_N300_DEV:
case USRP_X400_DEV:
rxshift=2;
break;
default:
@@ -746,8 +747,12 @@ static bool is_equal(double a, double b) {
void *freq_thread(void *arg) {
openair0_device *device=(openair0_device *)arg;
usrp_state_t *s = (usrp_state_t *)device->priv;
s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
uhd::tune_request_t tx_tune_req(device->openair0_cfg[0].tx_freq[0],
device->openair0_cfg[0].tune_offset);
uhd::tune_request_t rx_tune_req(device->openair0_cfg[0].rx_freq[0],
device->openair0_cfg[0].tune_offset);
s->usrp->set_tx_freq(tx_tune_req);
s->usrp->set_rx_freq(rx_tune_req);
return NULL;
}
/*! \brief Set frequencies (TX/RX). Spawns a thread to handle the frequency change to not block the calling thread
@@ -759,14 +764,18 @@ void *freq_thread(void *arg) {
int trx_usrp_set_freq(openair0_device *device, openair0_config_t *openair0_cfg, int dont_block) {
usrp_state_t *s = (usrp_state_t *)device->priv;
pthread_t f_thread;
printf("Setting USRP TX Freq %f, RX Freq %f\n",openair0_cfg[0].tx_freq[0],openair0_cfg[0].rx_freq[0]);
printf("Setting USRP TX Freq %f, RX Freq %f, tune_offset: %f, dont_block: %d\n",
openair0_cfg[0].tx_freq[0],openair0_cfg[0].rx_freq[0],
openair0_cfg[0].tune_offset, dont_block);
// spawn a thread to handle the frequency change to not block the calling thread
if (dont_block == 1)
pthread_create(&f_thread,NULL,freq_thread,(void *)device);
else {
s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
uhd::tune_request_t tx_tune_req(openair0_cfg[0].tx_freq[0], openair0_cfg[0].tune_offset);
uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0], openair0_cfg[0].tune_offset);
s->usrp->set_tx_freq(tx_tune_req);
s->usrp->set_rx_freq(rx_tune_req);
}
return(0);
@@ -779,9 +788,11 @@ int trx_usrp_set_freq(openair0_device *device, openair0_config_t *openair0_cfg,
*/
int openair0_set_rx_frequencies(openair0_device *device, openair0_config_t *openair0_cfg) {
usrp_state_t *s = (usrp_state_t *)device->priv;
uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]);
rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0], openair0_cfg[0].tune_offset);
printf("In openair0_set_rx_frequencies, freq: %f, tune offset: %f\n",
openair0_cfg[0].rx_freq[0], openair0_cfg[0].tune_offset);
//rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
//rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
s->usrp->set_rx_freq(rx_tune_req);
return(0);
}
@@ -1276,7 +1287,9 @@ extern "C" {
for(int i=0; i<((int) s->usrp->get_rx_num_channels()); i++) {
if (i<openair0_cfg[0].rx_num_channels) {
s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i+choffset);
s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i+choffset);
uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[i],
openair0_cfg[0].tune_offset);
s->usrp->set_rx_freq(rx_tune_req, i+choffset);
set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);
::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i+choffset);
// limit to maximum gain
@@ -1302,7 +1315,9 @@ extern "C" {
if (i<openair0_cfg[0].tx_num_channels) {
s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i+choffset);
s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i+choffset);
uhd::tune_request_t tx_tune_req(openair0_cfg[0].tx_freq[i],
openair0_cfg[0].tune_offset);
s->usrp->set_tx_freq(tx_tune_req, i+choffset);
s->usrp->set_tx_gain(gain_range_tx.stop()-openair0_cfg[0].tx_gain[i],i+choffset);
LOG_I(HW,"USRP TX_GAIN:%3.2lf gain_range:%3.2lf tx_gain:%3.2lf\n", gain_range_tx.stop()-openair0_cfg[0].tx_gain[i], gain_range_tx.stop(), openair0_cfg[0].tx_gain[i]);
}
targets/ARCH/rfsimulator/README.md
+11 -7
View File
@@ -61,6 +61,8 @@ Setting the env variable RFSIMULATOR can be used instead of using the serveraddr
## How to use the RF simulator options
To define and use a channel model, the configuration file needs to include a channel configuration file. To do this, add `@include "channelmod_rfsimu.conf"` to the end of the configuration file, and place the channel configuration file in the same directory. An example channel configuration file `channelmod_rfsimu.conf` is in `ci-scripts/conf_files`.
Add the following options to the command line to enable the channel model and the IQ samples saving for future replay:
```bash
--rfsimulator.options chanmod,saviq
@@ -82,6 +84,8 @@ Example run:
sudo RFSIMULATOR=server ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf --parallel-config PARALLEL_SINGLE_THREAD --rfsim --phy-test --rfsimulator.options chanmod --rfsimulator.modelname AWGN
```
where `@include "channelmod_rfsimu.conf"` has been added at the end of the file, and `ci-scripts/conf_files/channelmod_rfsimu.conf` copied to `targets/PROJECTS/GENERIC-LTE-EPC/CONF/`.
## 4G case
For the UE, it should be set to the IP address of the eNB. For example:
@@ -102,9 +106,7 @@ $OPENAIR_DIR/targets/bin/conf2uedata -c $OPENAIR_DIR/openair3/NAS/TOOLS/ue_eurec
## 5G case
The 5G RF simulator will be aligned with the 4G as the efforts for merging the 5G specific branches into the develop make progresses.
After regular build, add the simulation driver (do not use ./build_oai -w SIMU until 4G and 5G branches are merged).
If `build_oai` has not been run with `-w SIMU`, you need to build the `rfsimulator` manually. To do so:
```bash
cd ran_build/build
make rfsimulator
@@ -113,7 +115,7 @@ make rfsimulator
### Launch gNB in one window
```bash
sudo RFSIMULATOR=server ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf --parallel-config PARALLEL_SINGLE_THREAD --rfsim --phy-test
sudo RFSIMULATOR=server ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf --parallel-config PARALLEL_SINGLE_THREAD --rfsim --phy-test --nokrnmod 1
```
### Launch UE in another window
@@ -124,15 +126,17 @@ sudo RFSIMULATOR=<TARGET_GNB_INTERFACE_ADDRESS> ./nr-uesoftmodem --rfsim --phy-t
Notes:
1. <TARGET_GNB_INTERFACE_ADDRESS> can be 127.0.0.1 if both gNB and nrUE executables run on the same host, OR the IP interface address of the remote host running the gNB executable, if the gNB and nrUE run on separate hosts
2. the --rrc_config_path parameter SHALL specify where the 2 RAW files are located (`rbconfig.raw` and `reconfig.raw`).
1. This starts the gNB and UE in the `phy-test` UP-only mode where the gNB is started as if a UE had already connected, and a configurable scheduler is used instead of the default one. The options `-m`, `-l`, `-t`, `-M`, `-T`, `-D`, and `-U` can be used to configure this scheduler.
2. <TARGET_GNB_INTERFACE_ADDRESS> can be 127.0.0.1 if both gNB and nrUE executables run on the same host, OR the IP interface address of the remote host running the gNB executable, if the gNB and nrUE run on separate hosts.
3. The --rrc_config_path parameter SHALL specify where the 2 RAW files are located (`rbconfig.raw` and `reconfig.raw`).
- If you are running on the same machine and launched the 2 executables (`nr-softmodem` and `nr-uesoftmodem`) from the same directory, nothing has to be done.
- If you launched the 2 executables from 2 different folders, just point to the location where you launched the `nr-softmodem`:
* `sudo RFSIMULATOR=<TARGET_GNB_INTERFACE_ADDRESS> ./nr-uesoftmodem --rfsim --phy-test --rrc_config_path /the/path/where/you/launched/nr-softmodem`
- If you are not running on the same machine or launched the 2 executables from 2 different folders, you need to **COPY** the 2 raw files
* `scp usera@machineA:/the/path/where/you/launched/nr-softmodem/r*config.raw userb@machineB:/the/path/where/you/will/launch/nr-uesoftmodem/`
* Obviously this operation SHALL be done before launching the `nr-uesoftmodem` executable.
3. to enable the noS1 mode --noS1 and --nokrnmod 1 options should be added to the command line
4. To enable the noS1 mode, `--noS1` option should be added to the command line.
5. To operate the gNB/UE with a 5GC, start them using the `--sa` option. More information can be found [here](../../../doc/TESTING_5GSA_setup.md#2-sa-setup-with-oai-nr-ue-softmodem).
In the UE, you can add `-d` option to get the softscope.
targets/ARCH/rfsimulator/apply_channelmod.c
+4 -3
View File
@@ -52,7 +52,8 @@
either we regenerate the channel (call again random_channel(desc,0)), or we keep it over subframes
legacy: we regenerate each sub frame in UL, and each frame only in DL
*/
void rxAddInput( struct complex16 *input_sig, struct complex16 *after_channel_sig,
void rxAddInput( const c16_t *input_sig,
c16_t *after_channel_sig,
int rxAnt,
channel_desc_t *channelDesc,
int nbSamples,
@@ -73,7 +74,7 @@ void rxAddInput( struct complex16 *input_sig, struct complex16 *after_channel_si
const int nbTx=channelDesc->nb_tx;
for (int i=0; i<((int)nbSamples-dd); i++) {
struct complex16 *out_ptr=after_channel_sig+dd+i;
c16_t *out_ptr=after_channel_sig+dd+i;
struct complexd rx_tmp= {0};
for (int txAnt=0; txAnt < nbTx; txAnt++) {
@@ -87,7 +88,7 @@ void rxAddInput( struct complex16 *input_sig, struct complex16 *after_channel_si
// but it is not very usefull
// it would be better to split out each antenna in a separate flow
// that will allow to mix ru antennas freely
struct complex16 tx16=input_sig[((TS+i-l)*nbTx+txAnt)%CirSize];
c16_t tx16=input_sig[((TS+i-l)*nbTx+txAnt)%CirSize];
rx_tmp.r += tx16.r * channelModel[l].r - tx16.i * channelModel[l].i;
rx_tmp.i += tx16.i * channelModel[l].r + tx16.r * channelModel[l].i;
} //l
targets/ARCH/rfsimulator/rfsimulator.h
+2 -2
View File
@@ -25,8 +25,8 @@
#define __RFSIMULATOR_H
double gaussZiggurat(double mean, double variance);
void tableNor(unsigned long seed);
void rxAddInput( struct complex16 *input_sig,
struct complex16 *after_channel_sig,
void rxAddInput( const c16_t *input_sig,
c16_t *after_channel_sig,
int rxAnt,
channel_desc_t *channelDesc,
int nbSamples,
targets/ARCH/rfsimulator/simulator.c
+34 -65
View File
@@ -100,7 +100,7 @@ static telnetshell_vardef_t rfsimu_vardef[] = {
};
pthread_mutex_t Sockmutex;
typedef struct complex16 sample_t; // 2*16 bits complex number
typedef c16_t sample_t; // 2*16 bits complex number
typedef struct buffer_s {
int conn_sock;
@@ -117,7 +117,7 @@ typedef struct buffer_s {
typedef struct {
int listen_sock, epollfd;
openair0_timestamp nextTimestamp;
openair0_timestamp nextRxTstamp;
openair0_timestamp lastWroteTS;
uint64_t typeStamp;
char *ip;
@@ -196,7 +196,7 @@ static void removeCirBuf(rfsimulator_state_t *bridge, int sock) {
free(bridge->buf[sock].circularBuf);
// Fixme: no free_channel_desc_scm(bridge->buf[sock].channel_model) implemented
// a lot of mem leaks
free(bridge->buf[sock].channel_model);
//free(bridge->buf[sock].channel_model);
memset(&bridge->buf[sock], 0, sizeof(buffer_t));
bridge->buf[sock].conn_sock=-1;
}
@@ -429,7 +429,7 @@ static int rfsimulator_write_internal(rfsimulator_state_t *t, openair0_timestamp
if (!alreadyLocked)
pthread_mutex_lock(&Sockmutex);
LOG_D(HW,"sending %d samples at time: %ld\n", nsamps, timestamp);
LOG_D(HW,"sending %d samples at time: %ld, nbAnt %d\n", nsamps, timestamp, nbAnt);
for (int i=0; i<FD_SETSIZE; i++) {
buffer_t *b=&t->buf[i];
@@ -495,7 +495,7 @@ static bool flushInput(rfsimulator_state_t *t, int timeout, int nsamps_for_initi
setblocking(conn_sock, notBlocking);
allocCirBuf(t, conn_sock);
LOG_I(HW,"A client connected, sending the current time\n");
struct complex16 v= {0};
c16_t v= {0};
void *samplesVoid[t->tx_num_channels];
for ( int i=0; i < t->tx_num_channels; i++)
@@ -549,14 +549,14 @@ static bool flushInput(rfsimulator_state_t *t, int timeout, int nsamps_for_initi
(t->typeStamp == ENB_MAGICDL && b->th.magic==UE_MAGICDL), "Socket Error in protocol");
b->headerMode=false;
if ( t->nextTimestamp == 0 ) { // First block in UE, resync with the eNB current TS
t->nextTimestamp=b->th.timestamp> nsamps_for_initial ?
if ( t->nextRxTstamp == 0 ) { // First block in UE, resync with the eNB current TS
t->nextRxTstamp=b->th.timestamp> nsamps_for_initial ?
b->th.timestamp - nsamps_for_initial :
0;
b->lastReceivedTS=b->th.timestamp> nsamps_for_initial ?
b->th.timestamp :
nsamps_for_initial;
LOG_W(HW,"UE got first timestamp: starting at %lu\n", t->nextTimestamp);
LOG_W(HW,"UE got first timestamp: starting at %lu\n", t->nextRxTstamp);
b->trashingPacket=true;
} else if ( b->lastReceivedTS < b->th.timestamp) {
int nbAnt= b->th.nbAnt;
@@ -623,7 +623,7 @@ static int rfsimulator_read(openair0_device *device, openair0_timestamp *ptimest
}
rfsimulator_state_t *t = device->priv;
LOG_D(HW, "Enter rfsimulator_read, expect %d samples, will release at TS: %ld\n", nsamps, t->nextTimestamp+nsamps);
LOG_D(HW, "Enter rfsimulator_read, expect %d samples, will release at TS: %ld, nbAnt %d\n", nsamps, t->nextRxTstamp+nsamps, nbAnt);
// deliver data from received data
// check if a UE is connected
int first_sock;
@@ -634,54 +634,22 @@ static int rfsimulator_read(openair0_device *device, openair0_timestamp *ptimest
if ( first_sock == FD_SETSIZE ) {
// no connected device (we are eNB, no UE is connected)
if ( t->nextTimestamp == 0)
if ( t->nextRxTstamp == 0)
LOG_W(HW,"No connected device, generating void samples...\n");
if (!flushInput(t, 10, nsamps)) {
for (int x=0; x < nbAnt; x++)
memset(samplesVoid[x],0,sampleToByte(nsamps,1));
t->nextTimestamp+=nsamps;
t->nextRxTstamp+=nsamps;
if ( ((t->nextTimestamp/nsamps)%100) == 0)
LOG_D(HW,"No UE, Generated void samples for Rx: %ld\n", t->nextTimestamp);
if ( ((t->nextRxTstamp/nsamps)%100) == 0)
LOG_D(HW,"No UE, Generated void samples for Rx: %ld\n", t->nextRxTstamp);
*ptimestamp = t->nextTimestamp-nsamps;
*ptimestamp = t->nextRxTstamp-nsamps;
return nsamps;
}
} else {
pthread_mutex_lock(&Sockmutex);
if ( t->nextTimestamp > 0 && t->lastWroteTS < t->nextTimestamp) {
pthread_mutex_unlock(&Sockmutex);
usleep(10000);
pthread_mutex_lock(&Sockmutex);
if ( t->lastWroteTS < t->nextTimestamp ) {
// Assuming Tx is not done fully in another thread
// We can never write is the past from the received time
// So, the node perform receive but will never write these symbols
// let's tell this to the opposite node
// We send timestamp for nb samples required
// assuming this should have been done earlier if a Tx would exist
pthread_mutex_unlock(&Sockmutex);
struct complex16 v= {0};
void *dummyS[t->tx_num_channels];
for ( int i=0; i < t->tx_num_channels; i++)
dummyS[i]=(void *)&v;
LOG_I(HW, "No samples Tx occured, so we send 1 sample to notify it: Tx:%lu, Rx:%lu\n",
t->lastWroteTS, t->nextTimestamp);
rfsimulator_write_internal(t, t->nextTimestamp,
dummyS, 1,
t->tx_num_channels, 1, true);
} else {
pthread_mutex_unlock(&Sockmutex);
LOG_W(HW, "trx_write came from another thread\n");
}
} else
pthread_mutex_unlock(&Sockmutex);
bool have_to_wait;
@@ -692,7 +660,7 @@ static int rfsimulator_read(openair0_device *device, openair0_timestamp *ptimest
buffer_t *b=&t->buf[sock];
if ( b->circularBuf )
if ( t->nextTimestamp+nsamps > b->lastReceivedTS ) {
if ( t->nextRxTstamp+nsamps > b->lastReceivedTS ) {
have_to_wait=true;
break;
}
@@ -701,7 +669,7 @@ static int rfsimulator_read(openair0_device *device, openair0_timestamp *ptimest
if (have_to_wait)
/*printf("Waiting on socket, current last ts: %ld, expected at least : %ld\n",
ptr->lastReceivedTS,
t->nextTimestamp+nsamps);
t->nextRxTstamp+nsamps);
*/
flushInput(t, 3, nsamps);
} while (have_to_wait);
@@ -727,19 +695,20 @@ static int rfsimulator_read(openair0_device *device, openair0_timestamp *ptimest
t->poll_telnetcmdq(t->telnetcmd_qid,t);
for (int a=0; a<nbAnt; a++) {//loop over number of Rx antennas
if ( ptr->channel_model != NULL ) // apply a channel model
rxAddInput( ptr->circularBuf, (struct complex16 *) samplesVoid[a],
a,
ptr->channel_model,
nsamps,
t->nextTimestamp,
CirSize
);
if ( ptr->channel_model != NULL ) { // apply a channel model
rxAddInput(ptr->circularBuf, (c16_t *) samplesVoid[a],
a,
ptr->channel_model,
nsamps,
t->nextRxTstamp,
CirSize);
}
else { // no channel modeling
double H_awgn_mimo[4][4] ={{1.0, 0.5, 0.25, 0.125},//rx 0
{0.5, 1.0, 0.5, 0.25}, //rx 1
{0.25, 0.5, 1.0, 0.5}, //rx 2
{0.125, 0.25, 0.5, 1.0}};//rx 3
double H_awgn_mimo[4][4] ={{1.0, 0.2, 0.1, 0.05}, //rx 0
{0.2, 1.0, 0.2, 0.1}, //rx 1
{0.1, 0.2, 1.0, 0.2}, //rx 2
{0.05, 0.1, 0.2, 1.0}};//rx 3
sample_t *out=(sample_t *)samplesVoid[a];
int nbAnt_tx = ptr->th.nbAnt;//number of Tx antennas
@@ -747,8 +716,8 @@ static int rfsimulator_read(openair0_device *device, openair0_timestamp *ptimest
//LOG_I(HW, "nbAnt_tx %d\n",nbAnt_tx);
for (int i=0; i < nsamps; i++) {//loop over nsamps
for (int a_tx=0; a_tx<nbAnt_tx; a_tx++) { //sum up signals from nbAnt_tx antennas
out[i].r += (short)(ptr->circularBuf[((t->nextTimestamp+i)*nbAnt_tx+a_tx)%CirSize].r*H_awgn_mimo[a][a_tx]);
out[i].i += (short)(ptr->circularBuf[((t->nextTimestamp+i)*nbAnt_tx+a_tx)%CirSize].i*H_awgn_mimo[a][a_tx]);
out[i].r += (short)(ptr->circularBuf[((t->nextRxTstamp+i)*nbAnt_tx+a_tx)%CirSize].r*H_awgn_mimo[a][a_tx]);
out[i].i += (short)(ptr->circularBuf[((t->nextRxTstamp+i)*nbAnt_tx+a_tx)%CirSize].i*H_awgn_mimo[a][a_tx]);
} // end for a_tx
} // end for i (number of samps)
} // end of no channel modeling
@@ -756,11 +725,11 @@ static int rfsimulator_read(openair0_device *device, openair0_timestamp *ptimest
}
}
*ptimestamp = t->nextTimestamp; // return the time of the first sample
t->nextTimestamp+=nsamps;
*ptimestamp = t->nextRxTstamp; // return the time of the first sample
t->nextRxTstamp+=nsamps;
LOG_D(HW,"Rx to upper layer: %d from %ld to %ld, energy in first antenna %d\n",
nsamps,
*ptimestamp, t->nextTimestamp,
*ptimestamp, t->nextRxTstamp,
signal_energy(samplesVoid[0], nsamps));
return nsamps;
}
targets/PROJECTS/GENERIC-LTE-EPC/CONF/benetel-5g.conf
-2
View File
@@ -23,8 +23,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 31; //0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band257.tm1.32PRB.usrpn300.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band257.tm1.32PRB.usrpx300.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band257.tm1.66PRB.usrpn300.conf
+1 -3
View File
@@ -22,9 +22,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band261.tm1.32PRB.usrpn300.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band66.tm1.106PRB.usrpn300.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band66.tm1.106PRB.usrpx300.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band66.tm1.25PRB.usrpn300.conf
+266
View File
@@ -0,0 +1,266 @@
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
cell_type = "CELL_MACRO_GNB";
gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({mcc = 208; mnc = 93; mnc_length = 2;});
tr_s_preference = "local_mac";
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
min_rxtxtime = 6;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 2150 MHz + 12 PRBs@15kHz SCS (same as initial BWP), points to Subcarrier 0 of RB#10 of SSB block
absoluteFrequencySSB = 430432;
dl_frequencyBand = 66;
# this is 2150 MHz
dl_absoluteFrequencyPointA = 430000;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 0;
dl_carrierBandwidth = 25;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=25 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 6600;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 0;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 0;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 66;
ul_absoluteFrequencyPointA = 350000;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 0;
ul_carrierBandwidth = 25;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 6600;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 0;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -118;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
msg1_SubcarrierSpacing = 0;
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0;
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 0x1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 0;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 0;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_S1_MME = "eth0";
GNB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
GNB_INTERFACE_NAME_FOR_S1U = "eth0";
GNB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
thread_pool_size = 8;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
RUs = (
{
local_rf = "yes";
nb_tx = 1;
nb_rx = 1;
att_tx = 0;
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 50;
eNB_instances = [0];
## beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
## beamforming 1x4 matrix: 1 layer x 4 antennas
#bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
## beamforming 2x2 matrix:
#bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
## beamforming 4x4 matrix:
#bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
sdr_addrs = "addr=192.168.10.2,mgmt_addr=192.168.10.2,second_addr=192.168.20.2";
clock_src = "external";
# if_freq = 3700000000L;
# if_offset = 1000000;
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_DISABLE";
}
);
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
};
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.106PRB.30kHz,usrpb2x0.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 31;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.106PRB.slave.conf
+1 -3
View File
@@ -22,9 +22,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.slave.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.PTRS.usrpx300.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpb210.conf
+1 -3
View File
@@ -22,9 +22,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf
+5 -5
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -203,7 +201,7 @@ L1s = (
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_tx = 4
nb_rx = 1
att_tx = 0
att_rx = 0;
@@ -217,8 +215,10 @@ RUs = (
#bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
## beamforming 2x2 matrix:
#bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
## beamforming 4x4 matrix:
#bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
## beamforming 2x4 matrix:
#bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000];
#beamforming 4x4 matrix:
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
sdr_addrs = "addr=192.168.10.2,mgmt_addr=192.168.10.2,second_addr=192.168.20.2";
clock_src = "external";
}
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpx300.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.217PRB.usrpn300.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.217PRB.usrpx300.conf
+1 -3
View File
@@ -22,9 +22,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.24PRB.usrpb210.conf
+1 -3
View File
@@ -22,9 +22,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.24PRB.usrpn300.conf
+1 -3
View File
@@ -22,9 +22,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.24PRB.usrpx300.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.273PRB.usrpn300.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band78.tm1.106PRB.nfapi.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/testing_gnb.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 31; //0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/testing_gnb_24PRB.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 31; //0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/testing_gnb_n310.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 31; //0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
targets/PROJECTS/GENERIC-LTE-EPC/CONF/testing_gnb_nsa_n310.conf
-2
View File
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 31; //0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 200;
targets/PROJECTS/GENERIC-NR-5GC/CONF/cu_gnb.conf
-3
View File
@@ -45,10 +45,7 @@ gNBs =
remote_s_portc = 500;
remote_s_portd = 2152;
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
min_rxtxtime = 6;
sib1_tda = 0;
pdcch_ConfigSIB1 = (
{
targets/PROJECTS/GENERIC-NR-5GC/CONF/du_gnb.conf
-3
View File
@@ -37,10 +37,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
min_rxtxtime = 6;
sib1_tda = 0;
pdcch_ConfigSIB1 = (
{
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.band78.tm1.106PRB.usrpn300.gtp-itti.conf
+1 -3
View File
@@ -37,9 +37,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
sib1_tda = 0;
servingCellConfigCommon = (
{
#spCellConfigCommon
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band41.fr1.106PRB.usrpb210.conf
+62 -12
View File
@@ -19,10 +19,6 @@ gNBs =
{
sst = 1;
sd = 0x1; // 0 false, else true
},
{
sst = 1;
sd = 0x112233; // 0 false, else true
}
);
@@ -33,10 +29,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
min_rxtxtime = 6;
sib1_tda = 0;
min_rxtxtime = 2;
do_SRS = 1;
pdcch_ConfigSIB1 = (
@@ -174,6 +167,64 @@ gNBs =
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = ({
# BWP-Downlink
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
dl_bwp-Id_2 = 2;
dl_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
dl_bwp-Id_3 = 3;
dl_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp3_subcarrierSpacing = 1;
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
# bwp-InactivityTimer ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms8, ms10, ms20, ms30,
# ms40,ms50, ms60, ms80,ms100, ms200,ms300, ms500,
# ms750, ms1280, ms1920, ms2560, spare10, spare9, spare8,
# spare7, spare6, spare5, spare4, spare3, spare2, spare1 }
# UplinkConfig
# BWP-Uplink
# BWP 1 Configuration
ul_bwp-Id_1 = 1;
ul_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
ul_bwp-Id_2 = 2;
ul_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
ul_bwp-Id_3 = 3;
ul_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp3_subcarrierSpacing = 1;
firstActiveUplinkBWP-Id = 1; #BWP-Id
}
);
# ------- SCTP definitions
SCTP :
@@ -221,7 +272,7 @@ L1s = (
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 150;
pucch0_dtx_threshold = 100;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
@@ -231,12 +282,11 @@ RUs = (
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
att_tx = 6;
att_rx = 6;
bands = [41];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
sf_extension = 0;
eNB_instances = [0];
#beamforming 1x4 matrix:
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band66.fr1.106PRB.usrpn300.conf
-1
View File
@@ -36,7 +36,6 @@ gNBs =
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
min_rxtxtime = 6;
sib1_tda = 0;
pdcch_ConfigSIB1 = (
{
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.2x2.usrpn300.conf
+62 -10
View File
@@ -19,10 +19,6 @@ gNBs =
{
sst = 1;
sd = 0x1; // 0 false, else true
},
{
sst = 1;
sd = 0x112233; // 0 false, else true
}
);
@@ -33,15 +29,14 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pdsch_AntennaPorts_N1 = 2;
pusch_AntennaPorts = 2;
sib1_tda = 0;
do_SRS = 1;
ul_prbblacklist = "51,52,53,54"
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 11;
controlResourceSetZero = 12;
searchSpaceZero = 0;
}
);
@@ -73,7 +68,7 @@ gNBs =
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 11;
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
@@ -100,7 +95,7 @@ gNBs =
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -104;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
@@ -174,6 +169,64 @@ gNBs =
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = ({
# BWP-Downlink
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
dl_bwp-Id_2 = 2;
dl_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
dl_bwp-Id_3 = 3;
dl_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp3_subcarrierSpacing = 1;
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
# bwp-InactivityTimer ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms8, ms10, ms20, ms30,
# ms40,ms50, ms60, ms80,ms100, ms200,ms300, ms500,
# ms750, ms1280, ms1920, ms2560, spare10, spare9, spare8,
# spare7, spare6, spare5, spare4, spare3, spare2, spare1 }
# UplinkConfig
# BWP-Uplink
# BWP 1 Configuration
ul_bwp-Id_1 = 1;
ul_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
ul_bwp-Id_2 = 2;
ul_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
ul_bwp-Id_3 = 3;
ul_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp3_subcarrierSpacing = 1;
firstActiveUplinkBWP-Id = 1; #BWP-Id
}
);
# ------- SCTP definitions
SCTP :
@@ -235,7 +288,6 @@ RUs = (
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
sf_extension = 0;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.4layer.conf
+320
View File
@@ -0,0 +1,320 @@
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({
mcc = 208;
mnc = 99;
mnc_length = 2;
snssaiList = (
{
sst = 1;
sd = 0x1; // 0 false, else true
},
{
sst = 1;
sd = 0x112233; // 0 false, else true
}
);
});
nr_cellid = 12345678L;
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 4;
pusch_AntennaPorts = 4;
sib1_tda = 0;
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 12;
searchSpaceZero = 0;
}
);
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
absoluteFrequencySSB = 641280;
dl_frequencyBand = 78;
# this is 3600 MHz
dl_absoluteFrequencyPointA = 640008;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=27,L=48 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 28875; # 6366 12925 12956 28875 12952
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
#pdsch-ConfigCommon
#pdschTimeDomainAllocationList (up to 16 entries)
initialDLBWPk0_0 = 0; #for DL slot
initialDLBWPmappingType_0 = 0; #0=typeA,1=typeB
initialDLBWPstartSymbolAndLength_0 = 40; #this is SS=1,L=13
initialDLBWPk0_1 = 0; #for mixed slot
initialDLBWPmappingType_1 = 0;
initialDLBWPstartSymbolAndLength_1 = 57; #this is SS=1,L=5
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
# pusch-ConfigCommon (up to 16 elements)
initialULBWPk2_0 = 6; # used for UL slot
initialULBWPmappingType_0 = 1
initialULBWPstartSymbolAndLength_0 = 41; # this is SS=0 L=13
initialULBWPk2_1 = 6; # used for mixed slot
initialULBWPmappingType_1 = 1;
initialULBWPstartSymbolAndLength_1 = 52; # this is SS=10 L=4
initialULBWPk2_2 = 7; # used for Msg.3 during RA
initialULBWPmappingType_2 = 1;
initialULBWPstartSymbolAndLength_2 = 52; # this is SS=10 L=4
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
amf_ip_address = ( { ipv4 = "192.168.70.132";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_NG_AMF = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.70.129/24";
GNB_INTERFACE_NAME_FOR_NGU = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.70.129/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 150;
pucch_TargetSNRx10 = 200;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
pusch_proc_threads = 8;
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 150;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 4
nb_rx = 4
att_tx = 0
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
eNB_instances = [0];
#beamforming 1x4 matrix:
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
clock_src = "internal";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
rfsimulator :
{
serveraddr = "server";
serverport = "4043";
options = (); #("saviq"); or/and "chanmod"
modelname = "AWGN";
IQfile = "/tmp/rfsimulator.iqs";
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
ngap_log_level ="info";
ngap_log_verbosity ="medium";
};
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf
+62 -12
View File
@@ -19,10 +19,6 @@ gNBs =
{
sst = 1;
sd = 0x1; // 0 false, else true
},
{
sst = 1;
sd = 0x112233; // 0 false, else true
}
);
@@ -33,10 +29,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
min_rxtxtime = 6;
sib1_tda = 0;
min_rxtxtime = 2;
pdcch_ConfigSIB1 = (
{
@@ -173,6 +166,64 @@ gNBs =
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = ({
# BWP-Downlink
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
dl_bwp-Id_2 = 2;
dl_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
dl_bwp-Id_3 = 3;
dl_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp3_subcarrierSpacing = 1;
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
# bwp-InactivityTimer ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms8, ms10, ms20, ms30,
# ms40,ms50, ms60, ms80,ms100, ms200,ms300, ms500,
# ms750, ms1280, ms1920, ms2560, spare10, spare9, spare8,
# spare7, spare6, spare5, spare4, spare3, spare2, spare1 }
# UplinkConfig
# BWP-Uplink
# BWP 1 Configuration
ul_bwp-Id_1 = 1;
ul_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
ul_bwp-Id_2 = 2;
ul_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
ul_bwp-Id_3 = 3;
ul_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp3_subcarrierSpacing = 1;
firstActiveUplinkBWP-Id = 1; #BWP-Id
}
);
# ------- SCTP definitions
SCTP :
@@ -220,7 +271,7 @@ L1s = (
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 150;
pucch0_dtx_threshold = 100;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
@@ -230,12 +281,11 @@ RUs = (
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
att_tx = 6;
att_rx = 6;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
sf_extension = 0;
eNB_instances = [0];
#beamforming 1x4 matrix:
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.sabox.conf
-2
View File
@@ -31,8 +31,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
pdcch_ConfigSIB1 = (
{
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.162PRB.2x2.usrpn300.conf
+16 -51
View File
@@ -19,28 +19,23 @@ gNBs =
{
sst = 1;
sd = 0x1; // 0 false, else true
},
{
sst = 1;
sd = 0x112233; // 0 false, else true
}
);
});
nr_cellid = 12345678L;
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 2;
# do_CSIRS = 1;
min_rxtxtime_pdsch = 2;
ul_prbblacklist = "79,80,81,82"
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts_XP = 1;
pusch_AntennaPorts = 2;
do_CSIRS = 0;
ul_prbblacklist = "79,80,81,82"
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 11;
controlResourceSetZero = 12;
searchSpaceZero = 10;
}
);
@@ -66,27 +61,14 @@ gNBs =
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=162 (275*(275-L+1))+(274-RBstart))
initialDLBWPlocationAndBandwidth = 31899;
initialDLBWPlocationAndBandwidth = 31624;
#
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 11;
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 10;
#pdsch-ConfigCommon
#pdschTimeDomainAllocationList (up to 16 entries)
initialDLBWPk0_0 = 0;
#initialULBWPmappingType
#0=typeA,1=typeB
initialDLBWPmappingType_0 = 0;
#this is SS=1,L=13
initialDLBWPstartSymbolAndLength_0 = 40;
initialDLBWPk0_1 = 0;
initialDLBWPmappingType_1 = 0;
#this is SS=1,L=5
initialDLBWPstartSymbolAndLength_1 = 57;
#uplinkConfigCommon
#frequencyInfoUL
@@ -100,7 +82,7 @@ gNBs =
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 31899;
initialULBWPlocationAndBandwidth = 31624;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
@@ -112,7 +94,7 @@ gNBs =
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -104;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
@@ -141,22 +123,6 @@ gNBs =
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
# pusch-ConfigCommon (up to 16 elements)
initialULBWPk2_0 = 2;
initialULBWPmappingType_0 = 1
# this is SS=2 L=13
initialULBWPstartSymbolAndLength_0 = 41;
initialULBWPk2_1 = 2;
initialULBWPmappingType_1 = 1;
# this is SS=0 L=4
initialULBWPstartSymbolAndLength_1 = 52;
initialULBWPk2_2 = 7;
initialULBWPmappingType_2 = 1;
# this is SS=10 L=4
initialULBWPstartSymbolAndLength_2 = 52;
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
@@ -238,7 +204,7 @@ MACRLCs = (
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 200;
pusch_TargetSNRx10 = 150;
pucch_TargetSNRx10 = 200;
ulsch_max_frame_inactivity = 0;
}
@@ -249,21 +215,20 @@ L1s = (
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 120;
pucch0_dtx_threshold = 80;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 2
nb_rx = 2
att_tx = 0
nb_tx = 2;
nb_rx = 2;
att_tx = 0;
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
sf_extension = 0;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.217PRB.2x2.usrpn300.conf
+321
View File
@@ -0,0 +1,321 @@
Active_gNBs = ( "gNB-OAI");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "gNB-OAI";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({
mcc = 208;
mnc = 99;
mnc_length = 2;
snssaiList = (
{
sst = 1;
sd = 0x1; // 0 false, else true
}
);
});
nr_cellid = 12345678L;
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts_XP = 1;
pusch_AntennaPorts = 2;
do_CSIRS = 0;
ul_prbblacklist = "107,108,109,110"
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 12;
searchSpaceZero = 10;
}
);
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3300.24 + 106*12*30e3 = 3338.40 MHz (5G NR GSCN: 7734)
absoluteFrequencySSB = 622560;
dl_frequencyBand = 78;
# this is 3300.24 MHz
dl_absoluteFrequencyPointA = 620016;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 217;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=162 (275*(275-L+1))+(274-RBstart))
initialDLBWPlocationAndBandwidth = 31624;
#
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 10;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 217;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 31624;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -70;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = ({
# BWP-Downlink
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 16499; // RBstart=0, L=217 (80 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
# bwp-InactivityTimer ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms8, ms10, ms20, ms30,
# ms40,ms50, ms60, ms80,ms100, ms200,ms300, ms500,
# ms750, ms1280, ms1920, ms2560, spare10, spare9, spare8,
# spare7, spare6, spare5, spare4, spare3, spare2, spare1 }
# UplinkConfig
# BWP-Uplink
# BWP 1 Configuration
ul_bwp-Id_1 = 1;
ul_bwp1_locationAndBandwidth = 16499; // RBstart=0, L=217 (80 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp1_subcarrierSpacing = 1;
firstActiveUplinkBWP-Id = 1; #BWP-Id
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ( { ipv4 = "192.168.70.132";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_NG_AMF = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.70.129/24";
GNB_INTERFACE_NAME_FOR_NGU = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.70.129/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 150;
pucch_TargetSNRx10 = 200;
pusch_FailureThres = 1000;
ulsch_max_frame_inactivity = 0;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 80;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 2;
nb_rx = 2;
att_tx = 0;
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
#clock_src = "internal";
sdr_addrs = "mgmt_addr=192.168.10.2,addr=192.168.10.2,clock_source=internal,time_source=internal"
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
rfsimulator :
{
serveraddr = "server";
serverport = "4043";
options = (); #("saviq"); or/and "chanmod"
modelname = "AWGN";
IQfile = "/tmp/rfsimulator.iqs";
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
ngap_log_level ="debug";
f1ap_log_level ="debug";
};
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.273PRB.2x2.usrpn300.conf
+321
View File
@@ -0,0 +1,321 @@
Active_gNBs = ( "gNB-OAI");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "gNB-OAI";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({
mcc = 208;
mnc = 99;
mnc_length = 2;
snssaiList = (
{
sst = 1;
sd = 0x1; // 0 false, else true
}
);
});
nr_cellid = 12345678L;
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts_XP = 1;
pusch_AntennaPorts = 2;
do_CSIRS = 0;
ul_prbblacklist = "135,136,137,138"
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 12;
searchSpaceZero = 10;
}
);
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3300.24 + 134*12*30e3 = 3348.48 MHz (5G NR GSCN: 7741)
absoluteFrequencySSB = 623232;
dl_frequencyBand = 78;
# this is 3300.24 MHz
dl_absoluteFrequencyPointA = 620016;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 273;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=162 (275*(275-L+1))+(274-RBstart))
initialDLBWPlocationAndBandwidth = 31624;
#
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 10;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 273;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 31624;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -90;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -70;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = ({
# BWP-Downlink
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 1099; // RBstart=0, L=273 (100 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
# bwp-InactivityTimer ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms8, ms10, ms20, ms30,
# ms40,ms50, ms60, ms80,ms100, ms200,ms300, ms500,
# ms750, ms1280, ms1920, ms2560, spare10, spare9, spare8,
# spare7, spare6, spare5, spare4, spare3, spare2, spare1 }
# UplinkConfig
# BWP-Uplink
# BWP 1 Configuration
ul_bwp-Id_1 = 1;
ul_bwp1_locationAndBandwidth = 1099; // RBstart=0, L=273 (100 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp1_subcarrierSpacing = 1;
firstActiveUplinkBWP-Id = 1; #BWP-Id
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ( { ipv4 = "192.168.70.132";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_NG_AMF = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.70.129/24";
GNB_INTERFACE_NAME_FOR_NGU = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.70.129/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 150;
pucch_TargetSNRx10 = 200;
pusch_FailureThres = 1000;
ulsch_max_frame_inactivity = 0;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 80;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 2;
nb_rx = 2;
att_tx = 0;
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
#clock_src = "internal";
sdr_addrs = "mgmt_addr=192.168.10.2,addr=192.168.10.2,clock_source=internal,time_source=internal"
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
rfsimulator :
{
serveraddr = "server";
serverport = "4043";
options = (); #("saviq"); or/and "chanmod"
modelname = "AWGN";
IQfile = "/tmp/rfsimulator.iqs";
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
ngap_log_level ="debug";
f1ap_log_level ="debug";
};
targets/RT/USER/lte-ru.c
+23 -3
View File
@@ -732,7 +732,7 @@ void tx_rf(RU_t *ru,
int sf_extension = 0;
if ((SF_type == SF_DL) ||
(SF_type == SF_S)) {
(SF_type == SF_S) ) {
int siglen=fp->samples_per_tti,flags=1;
if (SF_type == SF_S) {
@@ -830,6 +830,23 @@ void tx_rf(RU_t *ru,
late_control=STATE_BURST_TERMINATE;
LOG_E(PHY,"TX : Timeout (sent %d/%d) state =%d\n",txs, siglen,late_control);
}
} else if (IS_SOFTMODEM_RFSIM ) {
// in case of rfsim, we always enable tx because we need to feed rx of the opposite side
// we write 1 single I/Q sample to trigger Rx (rfsim will fill gaps with 0 I/Q)
void *dummy_tx[ru->frame_parms->nb_antennas_tx];
int16_t dummy_tx_data[ru->frame_parms->nb_antennas_tx][2]; // 2 because the function we call use pairs of int16_t implicitly as complex numbers
memset(dummy_tx_data,0,sizeof(dummy_tx_data));
for (int i=0; i<ru->frame_parms->nb_antennas_tx; i++)
dummy_tx[i]= dummy_tx_data[i];
AssertFatal( 1 ==
ru->rfdevice.trx_write_func(&ru->rfdevice,
timestamp+ru->ts_offset-ru->openair0_cfg.tx_sample_advance-sf_extension,
dummy_tx,
1,
ru->frame_parms->nb_antennas_tx,
4),"");
}
}
@@ -1354,11 +1371,12 @@ void fill_rf_config(RU_t *ru,
cfg->tx_gain[i] = (double)ru->att_tx;
cfg->rx_gain[i] = ru->max_rxgain-(double)ru->att_rx;
cfg->configFilename = rf_config_file;
LOG_I(PHY,"channel %d, Setting tx_gain offset %f, rx_gain offset %f, tx_freq %f, rx_freq %f\n",
LOG_I(PHY,"channel %d, Setting tx_gain offset %.0f, rx_gain offset %.0f, tx_freq %.0f, rx_freq %.0f, tune_offset %.0f Hz\n",
i, cfg->tx_gain[i],
cfg->rx_gain[i],
cfg->tx_freq[i],
cfg->rx_freq[i]);
cfg->rx_freq[i],
cfg->tune_offset);
}
}
@@ -2955,6 +2973,8 @@ RU_t **RCconfig_RU(int nb_RU,int nb_L1_inst,PHY_VARS_eNB ***eNB,uint64_t *ru_mas
ru[j]->openair0_cfg.time_source = unset;
}
ru[j]->openair0_cfg.tune_offset = get_softmodem_params()->tune_offset;
LOG_I(PHY,"RU %d is_slave=%s\n",j,*(RUParamList.paramarray[j][RU_IS_SLAVE_IDX].strptr));
if (strcmp(*(RUParamList.paramarray[j][RU_IS_SLAVE_IDX].strptr), "yes") == 0) ru[j]->is_slave=1;
targets/RT/USER/lte-softmodem.h
-1
View File
@@ -49,7 +49,6 @@
{"debug-ue-prach", CONFIG_HLP_DBGUEPR, PARAMFLAG_BOOL, uptr:NULL, defuintval:1, TYPE_INT, 0}, \
{"no-L2-connect", CONFIG_HLP_NOL2CN, PARAMFLAG_BOOL, uptr:NULL, defuintval:1, TYPE_INT, 0}, \
{"calib-prach-tx", CONFIG_HLP_CALPRACH, PARAMFLAG_BOOL, uptr:NULL, defuintval:1, TYPE_INT, 0}, \
{"loop-memory", CONFIG_HLP_UELOOP, 0, strptr:&loopfile, defstrval:"iqs.in", TYPE_STRING,0}, \
{"ue-dump-frame", CONFIG_HLP_DUMPFRAME, PARAMFLAG_BOOL, iptr:&dumpframe, defintval:0, TYPE_INT, 0}, \
}
#define CMDLINE_CALIBUERX_IDX 0
targets/RT/USER/lte-ue.c
+393 -444
View File
File diff suppressed because it is too large Load Diff
targets/RT/USER/lte-uesoftmodem.c
+4 -11
View File
@@ -276,7 +276,6 @@ uint16_t node_number;
static void get_options(void) {
int CC_id=0;
int tddflag=0;
char *loopfile=NULL;
int dumpframe=0;
int timingadv=0;
uint8_t nfapi_mode = NFAPI_MONOLITHIC;
@@ -293,14 +292,6 @@ static void get_options(void) {
config_process_cmdline( cmdline_ueparams,sizeof(cmdline_ueparams)/sizeof(paramdef_t),NULL);
nfapi_setmode(nfapi_mode);
if (loopfile != NULL) {
printf("Input file for hardware emulation: %s",loopfile);
mode=loop_through_memory;
input_fd = fopen(loopfile,"r");
AssertFatal(input_fd != NULL,"Please provide a valid input file\n");
}
get_softmodem_params()->hw_timing_advance = timingadv;
if ( (cmdline_uemodeparams[CMDLINE_CALIBUERX_IDX].paramflags & PARAMFLAG_PARAMSET) != 0) mode = rx_calib_ue;
@@ -455,6 +446,7 @@ void init_openair0(LTE_DL_FRAME_PARMS *frame_parms,int rxgain) {
openair0_cfg[card].num_rb_dl=frame_parms->N_RB_DL;
openair0_cfg[card].clock_source = get_softmodem_params()->clock_source;
openair0_cfg[card].time_source = get_softmodem_params()->timing_source;
openair0_cfg[card].tune_offset = get_softmodem_params()->tune_offset;
openair0_cfg[card].tx_num_channels=min(2,frame_parms->nb_antennas_tx);
openair0_cfg[card].rx_num_channels=min(2,frame_parms->nb_antennas_rx);
@@ -473,11 +465,12 @@ void init_openair0(LTE_DL_FRAME_PARMS *frame_parms,int rxgain) {
openair0_cfg[card].tx_gain[i] = tx_gain[0][i];
openair0_cfg[card].rx_gain[i] = rxgain - rx_gain_off;
openair0_cfg[card].configFilename = get_softmodem_params()->rf_config_file;
printf("Card %d, channel %d, Setting tx_gain %f, rx_gain %f, tx_freq %f, rx_freq %f\n",
printf("Card %d, channel %d, Setting tx_gain %.0f, rx_gain %.0f, tx_freq %.0f, rx_freq %.0f, tune_offset %.0f\n",
card,i, openair0_cfg[card].tx_gain[i],
openair0_cfg[card].rx_gain[i],
openair0_cfg[card].tx_freq[i],
openair0_cfg[card].rx_freq[i]);
openair0_cfg[card].rx_freq[i],
openair0_cfg[card].tune_offset);
}
if (usrp_args) openair0_cfg[card].sdr_addrs = usrp_args;