Merge remote-tracking branch 'origin/develop' into F1_interop_ACC_n78

Conflicts:
	openair2/F1AP/f1ap_du_ue_context_management.c
	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_dlsch.c
	openair2/RRC/NR/MESSAGES/asn1_msg.h
	openair2/RRC/NR/rrc_gNB.c
	openair3/ocp-gtpu/gtp_itf.cpp

There were some important conflicts in openair3/ocp-gtpu/gtp_itf.cpp
I rewrote a bit the function Gtpv1uHandleGpdu(). It might have been
done wrongly.
To be tested and fixed if needed.

To redo the merge, if needed:
git checkout 9b2a163ebb
git merge 5ea828e149
This commit is contained in:
Cedric Roux
2022-06-08 15:48:24 +02:00
501 changed files with 22474 additions and 14435 deletions
@@ -23,8 +23,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 31; //0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -22,9 +22,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -0,0 +1,266 @@
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
cell_type = "CELL_MACRO_GNB";
gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({mcc = 208; mnc = 93; mnc_length = 2;});
tr_s_preference = "local_mac";
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
min_rxtxtime = 6;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 2150 MHz + 12 PRBs@15kHz SCS (same as initial BWP), points to Subcarrier 0 of RB#10 of SSB block
absoluteFrequencySSB = 430432;
dl_frequencyBand = 66;
# this is 2150 MHz
dl_absoluteFrequencyPointA = 430000;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 0;
dl_carrierBandwidth = 25;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=25 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 6600;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 0;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 0;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 66;
ul_absoluteFrequencyPointA = 350000;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 0;
ul_carrierBandwidth = 25;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 6600;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 0;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -118;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
msg1_SubcarrierSpacing = 0;
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0;
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 0x1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 0;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 0;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_S1_MME = "eth0";
GNB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
GNB_INTERFACE_NAME_FOR_S1U = "eth0";
GNB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
thread_pool_size = 8;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
RUs = (
{
local_rf = "yes";
nb_tx = 1;
nb_rx = 1;
att_tx = 0;
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 50;
eNB_instances = [0];
## beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
## beamforming 1x4 matrix: 1 layer x 4 antennas
#bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
## beamforming 2x2 matrix:
#bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
## beamforming 4x4 matrix:
#bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
sdr_addrs = "addr=192.168.10.2,mgmt_addr=192.168.10.2,second_addr=192.168.20.2";
clock_src = "external";
# if_freq = 3700000000L;
# if_offset = 1000000;
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_DISABLE";
}
);
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
};
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 31;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -22,9 +22,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -22,9 +22,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -203,7 +201,7 @@ L1s = (
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_tx = 4
nb_rx = 1
att_tx = 0
att_rx = 0;
@@ -217,8 +215,10 @@ RUs = (
#bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
## beamforming 2x2 matrix:
#bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
## beamforming 4x4 matrix:
#bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
## beamforming 2x4 matrix:
#bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000];
#beamforming 4x4 matrix:
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
sdr_addrs = "addr=192.168.10.2,mgmt_addr=192.168.10.2,second_addr=192.168.20.2";
clock_src = "external";
}
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -22,9 +22,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
@@ -22,9 +22,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
@@ -22,9 +22,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 31; //0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 31; //0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 31; //0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
@@ -22,8 +22,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 31; //0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 200;
@@ -45,10 +45,7 @@ gNBs =
remote_s_portc = 500;
remote_s_portd = 2152;
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
min_rxtxtime = 6;
sib1_tda = 0;
pdcch_ConfigSIB1 = (
{
@@ -37,10 +37,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
min_rxtxtime = 6;
sib1_tda = 0;
pdcch_ConfigSIB1 = (
{
@@ -37,9 +37,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
sib1_tda = 0;
servingCellConfigCommon = (
{
#spCellConfigCommon
@@ -19,10 +19,6 @@ gNBs =
{
sst = 1;
sd = 0x1; // 0 false, else true
},
{
sst = 1;
sd = 0x112233; // 0 false, else true
}
);
@@ -33,10 +29,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
min_rxtxtime = 6;
sib1_tda = 0;
min_rxtxtime = 2;
do_SRS = 1;
pdcch_ConfigSIB1 = (
@@ -174,6 +167,64 @@ gNBs =
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = ({
# BWP-Downlink
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
dl_bwp-Id_2 = 2;
dl_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
dl_bwp-Id_3 = 3;
dl_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp3_subcarrierSpacing = 1;
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
# bwp-InactivityTimer ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms8, ms10, ms20, ms30,
# ms40,ms50, ms60, ms80,ms100, ms200,ms300, ms500,
# ms750, ms1280, ms1920, ms2560, spare10, spare9, spare8,
# spare7, spare6, spare5, spare4, spare3, spare2, spare1 }
# UplinkConfig
# BWP-Uplink
# BWP 1 Configuration
ul_bwp-Id_1 = 1;
ul_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
ul_bwp-Id_2 = 2;
ul_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
ul_bwp-Id_3 = 3;
ul_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp3_subcarrierSpacing = 1;
firstActiveUplinkBWP-Id = 1; #BWP-Id
}
);
# ------- SCTP definitions
SCTP :
@@ -221,7 +272,7 @@ L1s = (
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 150;
pucch0_dtx_threshold = 100;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
@@ -231,12 +282,11 @@ RUs = (
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
att_tx = 6;
att_rx = 6;
bands = [41];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
sf_extension = 0;
eNB_instances = [0];
#beamforming 1x4 matrix:
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
@@ -36,7 +36,6 @@ gNBs =
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
min_rxtxtime = 6;
sib1_tda = 0;
pdcch_ConfigSIB1 = (
{
@@ -19,10 +19,6 @@ gNBs =
{
sst = 1;
sd = 0x1; // 0 false, else true
},
{
sst = 1;
sd = 0x112233; // 0 false, else true
}
);
@@ -33,15 +29,14 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pdsch_AntennaPorts_N1 = 2;
pusch_AntennaPorts = 2;
sib1_tda = 0;
do_SRS = 1;
ul_prbblacklist = "51,52,53,54"
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 11;
controlResourceSetZero = 12;
searchSpaceZero = 0;
}
);
@@ -73,7 +68,7 @@ gNBs =
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 11;
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
@@ -100,7 +95,7 @@ gNBs =
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -104;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
@@ -174,6 +169,64 @@ gNBs =
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = ({
# BWP-Downlink
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
dl_bwp-Id_2 = 2;
dl_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
dl_bwp-Id_3 = 3;
dl_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp3_subcarrierSpacing = 1;
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
# bwp-InactivityTimer ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms8, ms10, ms20, ms30,
# ms40,ms50, ms60, ms80,ms100, ms200,ms300, ms500,
# ms750, ms1280, ms1920, ms2560, spare10, spare9, spare8,
# spare7, spare6, spare5, spare4, spare3, spare2, spare1 }
# UplinkConfig
# BWP-Uplink
# BWP 1 Configuration
ul_bwp-Id_1 = 1;
ul_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
ul_bwp-Id_2 = 2;
ul_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
ul_bwp-Id_3 = 3;
ul_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp3_subcarrierSpacing = 1;
firstActiveUplinkBWP-Id = 1; #BWP-Id
}
);
# ------- SCTP definitions
SCTP :
@@ -235,7 +288,6 @@ RUs = (
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
sf_extension = 0;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
@@ -0,0 +1,320 @@
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({
mcc = 208;
mnc = 99;
mnc_length = 2;
snssaiList = (
{
sst = 1;
sd = 0x1; // 0 false, else true
},
{
sst = 1;
sd = 0x112233; // 0 false, else true
}
);
});
nr_cellid = 12345678L;
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 4;
pusch_AntennaPorts = 4;
sib1_tda = 0;
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 12;
searchSpaceZero = 0;
}
);
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
absoluteFrequencySSB = 641280;
dl_frequencyBand = 78;
# this is 3600 MHz
dl_absoluteFrequencyPointA = 640008;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=27,L=48 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 28875; # 6366 12925 12956 28875 12952
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
#pdsch-ConfigCommon
#pdschTimeDomainAllocationList (up to 16 entries)
initialDLBWPk0_0 = 0; #for DL slot
initialDLBWPmappingType_0 = 0; #0=typeA,1=typeB
initialDLBWPstartSymbolAndLength_0 = 40; #this is SS=1,L=13
initialDLBWPk0_1 = 0; #for mixed slot
initialDLBWPmappingType_1 = 0;
initialDLBWPstartSymbolAndLength_1 = 57; #this is SS=1,L=5
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
# pusch-ConfigCommon (up to 16 elements)
initialULBWPk2_0 = 6; # used for UL slot
initialULBWPmappingType_0 = 1
initialULBWPstartSymbolAndLength_0 = 41; # this is SS=0 L=13
initialULBWPk2_1 = 6; # used for mixed slot
initialULBWPmappingType_1 = 1;
initialULBWPstartSymbolAndLength_1 = 52; # this is SS=10 L=4
initialULBWPk2_2 = 7; # used for Msg.3 during RA
initialULBWPmappingType_2 = 1;
initialULBWPstartSymbolAndLength_2 = 52; # this is SS=10 L=4
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
amf_ip_address = ( { ipv4 = "192.168.70.132";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_NG_AMF = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.70.129/24";
GNB_INTERFACE_NAME_FOR_NGU = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.70.129/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 150;
pucch_TargetSNRx10 = 200;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
pusch_proc_threads = 8;
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 150;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 4
nb_rx = 4
att_tx = 0
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
eNB_instances = [0];
#beamforming 1x4 matrix:
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
clock_src = "internal";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
rfsimulator :
{
serveraddr = "server";
serverport = "4043";
options = (); #("saviq"); or/and "chanmod"
modelname = "AWGN";
IQfile = "/tmp/rfsimulator.iqs";
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
ngap_log_level ="info";
ngap_log_verbosity ="medium";
};
@@ -19,10 +19,6 @@ gNBs =
{
sst = 1;
sd = 0x1; // 0 false, else true
},
{
sst = 1;
sd = 0x112233; // 0 false, else true
}
);
@@ -33,10 +29,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
min_rxtxtime = 6;
sib1_tda = 0;
min_rxtxtime = 2;
pdcch_ConfigSIB1 = (
{
@@ -173,6 +166,64 @@ gNBs =
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = ({
# BWP-Downlink
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
dl_bwp-Id_2 = 2;
dl_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
dl_bwp-Id_3 = 3;
dl_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp3_subcarrierSpacing = 1;
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
# bwp-InactivityTimer ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms8, ms10, ms20, ms30,
# ms40,ms50, ms60, ms80,ms100, ms200,ms300, ms500,
# ms750, ms1280, ms1920, ms2560, spare10, spare9, spare8,
# spare7, spare6, spare5, spare4, spare3, spare2, spare1 }
# UplinkConfig
# BWP-Uplink
# BWP 1 Configuration
ul_bwp-Id_1 = 1;
ul_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
ul_bwp-Id_2 = 2;
ul_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
ul_bwp-Id_3 = 3;
ul_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp3_subcarrierSpacing = 1;
firstActiveUplinkBWP-Id = 1; #BWP-Id
}
);
# ------- SCTP definitions
SCTP :
@@ -220,7 +271,7 @@ L1s = (
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 150;
pucch0_dtx_threshold = 100;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
@@ -230,12 +281,11 @@ RUs = (
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
att_tx = 6;
att_rx = 6;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
sf_extension = 0;
eNB_instances = [0];
#beamforming 1x4 matrix:
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
@@ -31,8 +31,6 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
pdcch_ConfigSIB1 = (
{
@@ -19,28 +19,23 @@ gNBs =
{
sst = 1;
sd = 0x1; // 0 false, else true
},
{
sst = 1;
sd = 0x112233; // 0 false, else true
}
);
});
nr_cellid = 12345678L;
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 2;
# do_CSIRS = 1;
min_rxtxtime_pdsch = 2;
ul_prbblacklist = "79,80,81,82"
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts_XP = 1;
pusch_AntennaPorts = 2;
do_CSIRS = 0;
ul_prbblacklist = "79,80,81,82"
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 11;
controlResourceSetZero = 12;
searchSpaceZero = 10;
}
);
@@ -66,27 +61,14 @@ gNBs =
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=162 (275*(275-L+1))+(274-RBstart))
initialDLBWPlocationAndBandwidth = 31899;
initialDLBWPlocationAndBandwidth = 31624;
#
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 11;
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 10;
#pdsch-ConfigCommon
#pdschTimeDomainAllocationList (up to 16 entries)
initialDLBWPk0_0 = 0;
#initialULBWPmappingType
#0=typeA,1=typeB
initialDLBWPmappingType_0 = 0;
#this is SS=1,L=13
initialDLBWPstartSymbolAndLength_0 = 40;
initialDLBWPk0_1 = 0;
initialDLBWPmappingType_1 = 0;
#this is SS=1,L=5
initialDLBWPstartSymbolAndLength_1 = 57;
#uplinkConfigCommon
#frequencyInfoUL
@@ -100,7 +82,7 @@ gNBs =
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 31899;
initialULBWPlocationAndBandwidth = 31624;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
@@ -112,7 +94,7 @@ gNBs =
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -104;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
@@ -141,22 +123,6 @@ gNBs =
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
# pusch-ConfigCommon (up to 16 elements)
initialULBWPk2_0 = 2;
initialULBWPmappingType_0 = 1
# this is SS=2 L=13
initialULBWPstartSymbolAndLength_0 = 41;
initialULBWPk2_1 = 2;
initialULBWPmappingType_1 = 1;
# this is SS=0 L=4
initialULBWPstartSymbolAndLength_1 = 52;
initialULBWPk2_2 = 7;
initialULBWPmappingType_2 = 1;
# this is SS=10 L=4
initialULBWPstartSymbolAndLength_2 = 52;
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
@@ -238,7 +204,7 @@ MACRLCs = (
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 200;
pusch_TargetSNRx10 = 150;
pucch_TargetSNRx10 = 200;
ulsch_max_frame_inactivity = 0;
}
@@ -249,21 +215,20 @@ L1s = (
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 120;
pucch0_dtx_threshold = 80;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 2
nb_rx = 2
att_tx = 0
nb_tx = 2;
nb_rx = 2;
att_tx = 0;
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
sf_extension = 0;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
@@ -0,0 +1,321 @@
Active_gNBs = ( "gNB-OAI");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "gNB-OAI";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({
mcc = 208;
mnc = 99;
mnc_length = 2;
snssaiList = (
{
sst = 1;
sd = 0x1; // 0 false, else true
}
);
});
nr_cellid = 12345678L;
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts_XP = 1;
pusch_AntennaPorts = 2;
do_CSIRS = 0;
ul_prbblacklist = "107,108,109,110"
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 12;
searchSpaceZero = 10;
}
);
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3300.24 + 106*12*30e3 = 3338.40 MHz (5G NR GSCN: 7734)
absoluteFrequencySSB = 622560;
dl_frequencyBand = 78;
# this is 3300.24 MHz
dl_absoluteFrequencyPointA = 620016;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 217;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=162 (275*(275-L+1))+(274-RBstart))
initialDLBWPlocationAndBandwidth = 31624;
#
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 10;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 217;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 31624;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -70;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = ({
# BWP-Downlink
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 16499; // RBstart=0, L=217 (80 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
# bwp-InactivityTimer ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms8, ms10, ms20, ms30,
# ms40,ms50, ms60, ms80,ms100, ms200,ms300, ms500,
# ms750, ms1280, ms1920, ms2560, spare10, spare9, spare8,
# spare7, spare6, spare5, spare4, spare3, spare2, spare1 }
# UplinkConfig
# BWP-Uplink
# BWP 1 Configuration
ul_bwp-Id_1 = 1;
ul_bwp1_locationAndBandwidth = 16499; // RBstart=0, L=217 (80 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp1_subcarrierSpacing = 1;
firstActiveUplinkBWP-Id = 1; #BWP-Id
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ( { ipv4 = "192.168.70.132";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_NG_AMF = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.70.129/24";
GNB_INTERFACE_NAME_FOR_NGU = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.70.129/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 150;
pucch_TargetSNRx10 = 200;
pusch_FailureThres = 1000;
ulsch_max_frame_inactivity = 0;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 80;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 2;
nb_rx = 2;
att_tx = 0;
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
#clock_src = "internal";
sdr_addrs = "mgmt_addr=192.168.10.2,addr=192.168.10.2,clock_source=internal,time_source=internal"
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
rfsimulator :
{
serveraddr = "server";
serverport = "4043";
options = (); #("saviq"); or/and "chanmod"
modelname = "AWGN";
IQfile = "/tmp/rfsimulator.iqs";
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
ngap_log_level ="debug";
f1ap_log_level ="debug";
};
@@ -0,0 +1,321 @@
Active_gNBs = ( "gNB-OAI");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "gNB-OAI";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({
mcc = 208;
mnc = 99;
mnc_length = 2;
snssaiList = (
{
sst = 1;
sd = 0x1; // 0 false, else true
}
);
});
nr_cellid = 12345678L;
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts_XP = 1;
pusch_AntennaPorts = 2;
do_CSIRS = 0;
ul_prbblacklist = "135,136,137,138"
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 12;
searchSpaceZero = 10;
}
);
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3300.24 + 134*12*30e3 = 3348.48 MHz (5G NR GSCN: 7741)
absoluteFrequencySSB = 623232;
dl_frequencyBand = 78;
# this is 3300.24 MHz
dl_absoluteFrequencyPointA = 620016;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 273;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=162 (275*(275-L+1))+(274-RBstart))
initialDLBWPlocationAndBandwidth = 31624;
#
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 10;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 273;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 31624;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -90;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -70;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = ({
# BWP-Downlink
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 1099; // RBstart=0, L=273 (100 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
# bwp-InactivityTimer ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms8, ms10, ms20, ms30,
# ms40,ms50, ms60, ms80,ms100, ms200,ms300, ms500,
# ms750, ms1280, ms1920, ms2560, spare10, spare9, spare8,
# spare7, spare6, spare5, spare4, spare3, spare2, spare1 }
# UplinkConfig
# BWP-Uplink
# BWP 1 Configuration
ul_bwp-Id_1 = 1;
ul_bwp1_locationAndBandwidth = 1099; // RBstart=0, L=273 (100 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp1_subcarrierSpacing = 1;
firstActiveUplinkBWP-Id = 1; #BWP-Id
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ( { ipv4 = "192.168.70.132";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_NG_AMF = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.70.129/24";
GNB_INTERFACE_NAME_FOR_NGU = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.70.129/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 150;
pucch_TargetSNRx10 = 200;
pusch_FailureThres = 1000;
ulsch_max_frame_inactivity = 0;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 80;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 2;
nb_rx = 2;
att_tx = 0;
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
#clock_src = "internal";
sdr_addrs = "mgmt_addr=192.168.10.2,addr=192.168.10.2,clock_source=internal,time_source=internal"
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
rfsimulator :
{
serveraddr = "server";
serverport = "4043";
options = (); #("saviq"); or/and "chanmod"
modelname = "AWGN";
IQfile = "/tmp/rfsimulator.iqs";
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
ngap_log_level ="debug";
f1ap_log_level ="debug";
};