diff --git a/doc/README.md b/doc/README.md
index a4cfe19a2c..022174a4e7 100644
--- a/doc/README.md
+++ b/doc/README.md
@@ -57,6 +57,7 @@ There is some general information in the [OpenAirInterface Gitlab Wiki](https://
 - [How to do a handover](./handover-tutorial.md)
 - [How to setup gNB frequency](./gNB_frequency_setup.md)
 - [How to use the RT data recording app](./data_recording.md)
+- [How to use packages](./packages.md)
 
 Legacy unmaintained files:
 - [`L2NFAPI_NOS1.md`](./L2NFAPI_NOS1.md), [`L2NFAPI_S1.md`](./L2NFAPI_S1.md):
diff --git a/doc/packages.md b/doc/packages.md
new file mode 100644
index 0000000000..701d8ebac5
--- /dev/null
+++ b/doc/packages.md
@@ -0,0 +1,139 @@
+# OpenAirInterface Packages
+
+This document describes how to build Deb/RPM packages with OAI's build system, cmake.
+
+[[_TOC_]]
+
+## Create packages
+
+Packages are created by running `cpack` after configuring OAI with the appropriate options and building the executables.
+
+First, configure the project with `cmake` and select which type of package you want to build. Then, compile, and finally run `cpack`:
+
+```bash
+cd ~/openairinterface5g
+mkdir build && cd build
+cmake .. -GNinja <options>
+ninja
+cpack
+```
+
+where `<options>` is for:
+
+- packaging **USRP**: `-DOAI_USRP=ON -DPACKAGING_USRP=ON`
+- packaging **LTE**: `-DPACKAGING_LTE=ON`
+- packaging **NR**: `-DPACKAGING_NR=ON`
+- packaging **COMMON**: `-DPACKAGING_COMMON=ON -DENABLE_TELNETSRV=ON`
+- packaging **PHYSIM**: `-DPACKAGING_PHYSIM=ON`
+
+By default, deb packages are built. If you want to build for RPM, also provide `-DPACKAGING_RPM=ON`
+
+For example, to package all available packages, run:
+
+```bash
+cmake .. -GNinja -DOAI_USRP=ON -DPACKAGING_USRP=ON -DPACKAGING_LTE=ON -DPACKAGING_NR=ON -DPACKAGING_COMMON=ON -DENABLE_TELNETSRV=ON -DPACKAGING_PHYSIM=ON
+ninja
+cpack
+```
+
+## Package installation
+
+In order to install the packages, run:
+
+### Ubuntu/Debian
+
+    dpkg -i liboai-common.deb liboai-usrp.deb oai-lte.deb oai-nr.deb oai-physim.deb
+
+### Rhel/Fedora
+
+    rpm -i liboai-common.rpm liboai-usrp.rpm oai-lte.rpm oai-nr.rpm oai-physim.rpm
+
+
+**NOTE**: After oai-nr and oai-lte installation, you'll have services running in systemd, for more information check Systemd paragraph.
+
+
+## Usage
+
+### Use debug symbols
+
+- Install gdb with `apt` or `dnf`
+- Install both stripped package and the corresponding debug symbol one
+- Use gbd on you executable, example: ```gdb --args /usr/bin/nr-softmodem -O
+ /etc/openairinterface/nr/gnb.sa.band78.fr1.106PRB.usrpb210.conf -E
+ --continuous-tx -A -2 --device.name oai_usrpdevif```
+- Then use ```run```
+
+### Systemd
+
+Once installed, oai-nr and oai-lte have **services** which run in systemd
+(`nr-softmodem` and `nr-cuup` for oai-nr and `lte-softmodem` for oai-lte),
+here is a list of useful **commands**:
+
+- start
+- stop
+- restart
+- reload
+- status
+- enable (enable service at boot)
+- disable (disable service at boot)
+- is-enabled
+
+To use them:
+
+    sudo systemctl [command] [service]
+
+By default, following configuration files are selected:
+- **nr-softmodem**: `gnb.sa.band78.fr1.106PRB.usrpb210.conf`
+- **nr-cuup**: `gnb-cuup.sa.f1.conf`
+- **lte-softmodem**: `enb.band7.tm1.50PRB.usrpb210.conf`
+
+To modify the configuration:
+- Select the configuration file you wish from the following locations:
+    - `/etc/openairinterface/nr`
+    - `/etc/openairinterface/lte`
+    - Or any custom configuration file you have created.
+- Edit the service configuration under `/lib/systemd/system`.
+
+Main lines to be modified are
+
+    ExecStart=/usr/bin/nr-softmodem -O /etc/openairinterface/nr/gnb.sa.band78.fr1.106PRB.usrpb210.conf -E --continuous-tx -A -2 --device.name oai_usrpdevif
+
+This line specifies the command and its parameters that the service will execute.
+
+    Restart=on-failure
+    RestartSec=5s
+
+These directives define the service’s behavior in case of failure, including whether it should restart and the delay before restarting.
+
+**NOTE**: Additional configuration options are available for further customization.
+For full customization please check [systemd services documentation](https://www.freedesktop.org/software/systemd/man/latest/systemd.service.html)
+
+After making your changes, apply them by running:
+
+    sudo systemctl daemon-reload && sudo systemctl restart nr-softmodem.service
+
+For instructions on using a custom configuration file, see the [setup documentation](./gNB_frequency_setup.md).
+
+
+
+To access service logs:
+
+    sudo journalctl -u [service] --since "today"
+
+
+To follow service logs:
+
+    sudo journalctl -u [service] --follow
+
+
+## Purge
+
+To uninstall packages and automatically stop and remove services in systemd, run:
+
+### Ubuntu/Debian
+
+    dpkg -r liboai-common liboai-usrp oai-lte oai-nr oai-physim
+
+### Rhel/Fedora
+
+    rpm -e liboai-common liboai-usrp oai-lte oai-nr oai-physim