These libraries have an (indirect) dependency on T, either by using the
logging module (which in turn depends on T), or through other includes.
The easiest is to depend on the logging module, which will fulfil also
the T dependency.
It would equally be feasible to use the utils target (which in turn
depends on log_headers), but this would necessitate to compile, and does
not seem to be necessary.
T hacks: add new tracer ant0 and a tool to plot ofdm data from usrp or rfsim
(output or input)
The tool ant0 dumps IQ data to a file (or stdout) as float complex or short.
It is needed for a student's project. (Well, we could use record/extract, but
it's simpler.) The tool ofdm-plot is used to plot output or input signal from
gnb in the frequency domain. May be useful to debug, why not.
bridge->nb_cnx++ is done before calling snprintf(modelname,... in the function,
so we take the model name of the next channel. This commit corrects the issue by
using bridge->nb_cnx - 1, ensuring that the model name corresponds to the currently
connected client.
This bug was introduced by MR !3455.
Co-authored-by: Bartosz Podrygajlo <bartosz.podrygajlo@openairinterface.org>
Co-authored-by: Laurent THOMAS <laurent.thomas@open-cells.com>
RF simulator: Fix concurrency issues during new client connections
- Fix concurrency issues happening when a new client connects, sometimes
leading to a total softmodem deadlock.
- trace in 4G RAR processing to debug ci result
Fix concurrency issues happening when a new client connects, sometimes
leading to a total softmodem deadlock.
Key changes:
- Fix sample sending on new client connection: send the first
sample only to the newly connected client.
- Remove the --rfsimulator.hanging-workaround option
- Replace global nb_ue and Sockmutex with nb_cnx and Sockmutex
in rfsimulator_state_t for better concurrency and clarity.
Replace the FD <-> buffer_t hashtable with epoll_event_t mapping.
This simplifies the code, reduces the probability of memory leaks and removes a
possible data race on the hashtable during rfsimulator shutdown.
Use `rfsimu_channel_ue1`, `rfsimu_channel_ue2`, etc. if you want to
use different channel models for each client. The client connection
order determines its channel model name.
Enable/disable workaround based on a new option "hanging-workaround".
This addresses an issue where the workaround will trigger even if there
is no risk of a permanent lockup of the system.
Added new command line option to channelmod: noise_power_dBFS. This options
allows the user to configure noise power in dBFS added instead of the per-channel
value.
This makes it so noise is not accumulated per channel reaching higher than expected
values.
The dBFS unit allows easy configuration. The gNB by default uses -36 dBFS setting.
To reach 3dB SNR one should set the noise_power_dBFS value to -39.
To configure using command line use --channelmod.noise_power_dBFS -50. Using this
setting the gNB and nrUE connect without issue.
fix NTN LEO scenarios
- gNB: add support for NTN parameter ta-CommonDrift-r17
- NR UE: fix application of NTN TA information
- NR UE: add command line parameter ntn-initial-time-drift to compensate
time drift during initial sync
- NR UE: fix writeTimestamp inconsistencies
- NR UE: add MAC state UE_RECEIVING_SIB ensuring to start RA only after
successfully receiving SIBs
- rfsimulator: update earth radius for LEO simulation to match UE
position in ue.conf file
- update conf files for NTN LEO scenario
- update description how to run NTN scenarios in RUNMODEM.md
- fix: ta-Common is a round-trip-time, not a one-way delay
- NR UE: simplify calculation of next_tx_slot_and_frame by moving up
assignment of duration_rx_to_tx
- cellbarredNTN indicates notbarred in SIB1 if NTN access is available
- Removed b66 NTN and enabled B254 NTN conf file in CI
- NR UE: RRC layer now explicitly tells MAC layer when the RA procedure
can be started
- move NTN LEO config to band 254 and update doc/RUNMODEM.md
Closes#901
This commit refactors startServer to use getaddrinfo() to
prepare the socket creation. Doing so, it also adds support for
IPv6 by using AF_UNSPEC as the address family.
This commits uses getaddrinfo(3) when connecting as client to the
rfsimulator. This enables name lookups, through DNS or a hosts file.
This change makes it easier to use the simulator in a dynamic
environment like Docker or Kubernetes by only targeting the name of
the container or service.
It is very possible that the operating system returns a file
descriptor bigger than the size of bridge->buf (MAX_FD_RFSIMU, which
is 250 as of now). As a minimum, let's fail if the socket file
descriptor is out of bounds.
A proper solution may be implemented later, if needed.
The actual propagation delay should not be smaller than the one specified.
A too short propagation delay might result in too early reception of Msg1, and with that in a mis-detection of the RAPID.
Laurent THOMAS