maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
7,823 Commits 5 Branches 0 Tags
0846460753b1bed8ff42d16f554b40e7f81d5ccd
Commit Graph
1009 Commits
Author SHA1 Message Date
Robert Schmidt 0846460753 show which task sends TERMINATE_MESSAGE to which task 2018-09-03 18:10:28 +02:00
Cedric Roux 4c069754d3 Merge remote-tracking branch 'origin/basic-simulator-fixes' into develop_integration_2018_w35 2018-08-31 14:49:50 +02:00
Cedric Roux c22180ff31 Merge remote-tracking branch 'origin/issue326_LOGreview' into develop_integration_2018_w35 
Conflicts:
	cmake_targets/CMakeLists.txt
	openair1/PHY/LTE_TRANSPORT/dlsch_modulation.c
	openair1/SCHED_UE/phy_procedures_lte_ue.c
	openair2/LAYER2/MAC/eNB_scheduler_phytest.c
 2018-08-31 12:55:28 +02:00
Cedric Roux 7654f8a208 Merge remote-tracking branch 'origin/issue_344_segv_trace_wireshark' into develop_integration_2018_w35 2018-08-31 12:43:33 +02:00
Cedric Roux 4aec4a23a8 Merge remote-tracking branch 'origin/multi-sdr-ip-conf' into develop_integration_2018_w35 2018-08-31 11:50:19 +02:00
Cedric Roux a48c36582f bugfix: fix threading in the UE 
Various problems were found with the basic simulator.

Variables used by various threads for synchronization need to
be initialized properly. That is before the various threads
start using them.

This goes for:
- UE->is_synchronized
- UE->proc.instance_cnt_synch
- UE->proc.instance_cnt_rxtx

The function "UE->rfdevice.trx_start_func" was called in
"UE_thread_synch" but should be called in "UE_thread" because
"UE_thread" is the one that calls "UE->rfdevice.trx_read_func"
and there is no guaranty that the call to "UE->rfdevice.trx_start_func"
is done before as it has to (it's in another thread).

And finally "pthread_cond_signal(&proc->cond_rxtx)" was called twice,
which may not be a problem but was certainly not intended. Plus
removing one call simplifies the code by removing some "if" logic,
which is a good thing per se.

This commit was not tested with a real UE and may thus introduce some
issues. Hopefully not!
 2018-08-27 17:46:03 +02:00
Cedric Roux 97ddf5ea28 basic simulator: bugfix: wait for synch ready at the right time 
Before this commit we were checking for UE->is_synchronized == 0
then we were waiting for a potentially active synch routine to
finish and then we were starting the synch routine again but the
synch routine that was running may have set UE->is_synchronized
to 1. This was leading to various problems, most notably the following
message repeated over and over in the UE log and the UE unable to
connect properly:

    [RRC]  [UE 0] Frame 377: OUT OF SYNC FROM eNB 0 (T310 active 0 : T310 0, N310 345, N311 0)

So let's wait for a potentially active synch routine to finish
before anything else.
 2018-08-27 17:32:00 +02:00
frtabu 51c86dd49e fix noS1 build failure 2018-08-24 20:06:02 +02:00
frtabu 77f70e77ea MSC logging utility as a config option 2018-08-24 17:43:14 +02:00
frtabu 24f8fcf346 Use common log mechanism in layer 3, mapping specific macros to common ones and extending common log utilities to support specific layer3 requirements 2018-08-24 17:43:14 +02:00
frtabu 79588a494e LOG_F replaced by LOG_DUMPMSG. Add a generic function to dump a buffer or message. Go on with LOG_M implementation improvement. Remove redundant options to enable/disable logs. 2018-08-24 17:43:14 +02:00
laurent d5f28018ed fix 344 2018-08-23 13:06:17 +02:00
Cedric Roux e74010220d bugfix: fix duplicated code 
As reported by Robert Schmidt.
 2018-08-17 15:45:38 +02:00
Eino Virtanen be0e409594 USRP addressess and clock sources can be configured in the configuration file with the RU section with comma separated IP addresses in 'sdr_addrs' and with strings "internal"/"external"/"gpsdo" in 'clock_src'. 
TODO: Currently the driver picks the two first RX and TX channels when nb_tx and nb_rx are both set to 2. If a developers wants to force usage of two devices, 'set_rx_subdev_spec' and 'set_tx_subdev_spec' can be used to indicate to the driver so that antennas from separate devices will be used. To rephrase: until 4 antennas are supported by OAI, testing with two devices, so that antennas from both devices are used, requires manual configuration of which subdevices' antennas are used.

Conflicts:
	targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
 2018-08-16 16:22:13 +02:00
Cedric Roux 53bb1fb091 minor bugfix 
Compilation of UE softmodem failed.
 2018-08-14 15:54:34 +02:00
Konstantinos Alexandris 5c85231782 GPS synchronization 2018-08-10 11:06:21 +02:00
Cedric Roux 15f7ae91be fix single_thread_flag usage 2018-08-03 14:58:18 +02:00
Cedric Roux 409b3d5c20 Merge remote-tracking branch 'origin/issue326_LOGreview' into develop_integration_2018_w31 2018-08-03 09:45:26 +02:00
Cedric Roux c95b84e9d0 Merge remote-tracking branch 'origin/parallel-phy-test-EMUFH' into develop_integration_2018_w31 2018-08-03 09:44:38 +02:00
Raphael Defosseux 621b73938d CI: hotfix for stability 
-- stdbuf -o0 seems to be causing segmentation fault
  -- using daemon instead of nohup
  -- also repeating several time "got sync" message and flushing stdout/stderr

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>
 2018-07-31 14:41:19 +02:00
frtabu 30509955c2 remove compilation warnings, especially when disabling T_TRACER. enhance LOG_M macro implementation, introduce LOG_DEBUG_XXX macro to replace #ifdef DEBUG_XXX 2018-07-30 20:07:22 +02:00
frtabu b85cbddeec log.c simplification, fix usefull functionality which never worked, move all log code from openair2 to common 2018-07-30 20:07:22 +02:00
Wang Tsu-Han d45fcd6fc2 Merge branch 'develop' into parallel-phy-test-EMUFH 
Conflicts:
	openair1/PHY/LTE_TRANSPORT/dlsch_modulation.c
	openair1/PHY/LTE_UE_TRANSPORT/get_pmi.c
	openair2/LAYER2/MAC/eNB_scheduler_phytest.c
	openair3/S1AP/MESSAGES/ASN1/R8/s1ap-8.10.0.asn1
	targets/RT/USER/lte-enb.c
	targets/RT/USER/lte-ru.c
	targets/RT/USER/rfsim.h
 2018-07-30 11:42:34 +02:00
Wang Tsu-Han aa00a4734a reset for remerging 2018-07-30 11:24:08 +02:00
Raymond Knopp 11c4cb9b33 1. fixed initialization issues for lte-uesoftmodem when running with non RF simulation target. 
2. minor modifications in dlsch_demodulation.c for 2 eNB TX antennas, 1 RX antenna. Inconsistant indexing of some arrays in this case.
3. change in config_load_configmodule.c : removed exit(-1) when no configuration file is used. This makes unitary simulators exit. Effect on lte-XXsoftmodem TBC.
 2018-07-25 00:33:04 +02:00
Cedric Roux 1961fd7f20 remove gccxml/castxml 
This was used for the ITTI analyzer.

The ITTI analyzer is now to be considered obsolete.
The source code will be removed at some point.
 2018-07-24 15:52:04 +02:00
Cedric Roux b1d0287327 Merge remote-tracking branch 'origin/issue321_tdd_config1' into develop_integration_2018_w29 
Conflicts:
	openair2/LAYER2/MAC/eNB_scheduler_primitives.c
 2018-07-20 12:26:13 +02:00
Cedric Roux e7ea9e7611 Merge remote-tracking branch 'origin/issue326_LOGreview' into develop_integration_2018_w29 
Conflicts:
	cmake_targets/CMakeLists.txt
 2018-07-20 12:11:52 +02:00
Cedric Roux c836ef28f4 Merge remote-tracking branch 'origin/enhancement-rfsim' into develop_integration_2018_w29 
Conflicts:
	openair2/LAYER2/MAC/eNB_scheduler_primitives.c
	openair2/UTIL/LOG/log.c
	targets/RT/USER/lte-uesoftmodem.c
	targets/SIMU/USER/oaisim.c
	targets/SIMU/USER/oaisim_functions.c
 2018-07-20 12:06:26 +02:00
Raymond Knopp 3539761c28 Log review step 1: legacy VCD removal, LOG macro modified, TTracer enabled at build time by default, in a way it, by default configuration, provides console logs, as in previous versions 2018-07-13 16:43:34 +02:00
Haruki NAOI eb030b6a29 fix: compile error using "--mu" build option. 2018-07-13 14:53:14 +09:00
Haruki NAOI b033317286 Merge remote-tracking branch 'remotes/origin/develop' into issue321_tdd_config1 
# Conflicts:
#	openair2/UTIL/LOG/log.c
 2018-07-13 14:13:10 +09:00
Raymond Knopp b2821c1f53 T tracer configuration identical for all executables, no ref to T Tracer config variables (T_port, T_wait...) outside the T tracer 2018-07-09 15:18:27 +02:00
oai 719762ccab fix basic_simulator compilation failure 2018-07-06 15:30:02 +02:00
Raymond Knopp 494348e2f0 Merge remote-tracking branch 'origin/develop' into enhancement-rfsim 2018-07-06 06:24:31 +02:00
oai bfecc0110b Remove compilation warnings, also fix telnet server compilation failure and NB-IoT shared lib compilation failure introduced when reviewing L1 sources organization 2018-07-05 17:37:38 +02:00
Haruki NAOI 823c838d21 Merge remote-tracking branch 'remotes/origin/develop' into issue321_tdd_config1 2018-07-05 11:15:30 +09:00
Haruki NAOI 4f52f5a748 fix: sync_cond is posted before eNB_thread_rxtx thread is not activated. 2018-07-05 10:13:17 +09:00
Raphael Defosseux f3b5f5433c Merge branch 'develop' into '322-code-cleanup-log_m-to-replace-write_output' 
# Conflicts:
#   openair1/PHY/LTE_UE_TRANSPORT/srs_modulation.c
 2018-07-03 15:48:19 +02:00
Raymond Knopp 5a808cb1ca Merge branch 'develop' into enhancement-rfsim 
Conflicts:
	openair1/SCHED_UE/phy_procedures_lte_ue.c
	openair2/RRC/LTE/rrc_UE.c
	targets/RT/USER/lte-ru.c
	targets/RT/USER/lte-uesoftmodem.c
 2018-06-28 14:54:15 -07:00
Raymond Knopp d0926ec041 Merge branch 'develop' of https://gitlab.eurecom.fr/oai/openairinterface5g into develop 
Conflicts:
	targets/RT/USER/lte-uesoftmodem.c
 2018-06-28 14:49:23 -07:00
Raymond Knopp 27892e0935 Merge remote-tracking branch 'origin/develop' into enhancement-rfsim 
Conflicts:
	cmake_targets/build_oai
	openair2/LAYER2/MAC/eNB_scheduler_ulsch.c
	targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.if4p5.50PRB.lo.conf
	targets/RT/USER/lte-ru.c
	targets/RT/USER/lte-softmodem.c
	targets/RT/USER/lte-uesoftmodem.c
 2018-06-28 14:44:47 -07:00
bruno mongazon 94611edefe fix issue #322 2018-06-28 14:15:15 +02:00
bruno mongazon 7a5c40c130 fix issue #320 after having to merge with develop again since committed in the meantime 2018-06-26 15:08:49 +02:00
Cedric Roux 142fa8f4da hotfix: remove code that deadlocks 
We have to not call that function here because
it blocks everything if number of proc > 4.
 2018-06-26 10:43:31 +02:00
bruno mongazon 107e256170 fixed #320 issue 2018-06-25 18:42:31 +02:00
bruno mongazon b016bc229a fixed #320 issue 2018-06-25 18:23:36 +02:00
Raymond Knopp fb4d10c83a Merge branch 'develop' of https://gitlab.eurecom.fr/oai/openairinterface5g into develop 2018-06-21 23:13:47 -07:00
matzakos 74d1853ef6 Minor modifications to make nfapi-L2-emulator work again and redundant logs removal. 2018-06-21 17:56:29 +02:00
Cedric Roux 0c445bedda Merge remote-tracking branch 'origin/bugfix-310-IQrecplay' into develop 2018-06-18 16:25:48 +02:00