* Without a valid 5G NAS security context:
* Send REGISTRATION REQUEST with cleartext IEs only.
* After activating a security context via Security Mode Control:
wrap the entire REGISTRATION REQUEST (with both non-cleartext and cleartext)
in a NAS message container IE, include it in SECURITY MODE COMPLETE
* With a valid 5G NAS security context:
* If non-cleartext IEs are needed, wrap the entire message in a NAS message container IE and cipher it.
* If only cleartext IEs are needed, send the message directly without the NAS message container IE.
* this commit is enabling the handling of non-cleartext IEs in the NAS Registration Request message
according to 24.501, 23.502
* send the full Registration Request message in the NAS Container of the SECURITY MODE COMPLETE
* send the non-cleartext IEs in the NAS container of the Registration Request
closes#881
* send integrity protected Initial NAS Message when UE in 5GMM-IDLE mode has valid current 5G NAS security context:
> According to 4.4.2.5 TS 24.501:
> when a UE in 5GMM-IDLE mode establishes a new NAS signalling connection and has a valid current 5G NAS
> security context, the UE shall transmit the initial NAS message integrity protected with the current 5G NAS security
> context and further protect this message as specified in subclause 4.4.6.
* set NAS key set identifier IE to "no key is available (UE to network)"
* previously set to 1 which has no impact
* set now to 111 in order to trigger new authentication
* See 9.11.3.32 of 3GPP TS 24.501
* Do 5GS Registration Type "mobility registration updating" when 5GMM state is De-registered
Make the same change as in parent commit, i.e., write the full 32-bit
segment size.
I could not test this, as we do not reach these rx_data.indication
length. It's based on the fix in the parent commit, and to avoid future
bad surprises.
The 5G nFAPI message length is 32bits. In particular tx_data.requests
can be longer than 64kB. When segmenting, we should correctly write the
message of the current segment (across all 32bits), because the
length would interpreted wrongly otherwise.
This fixes a bug in which tx_data.requests were discarded for 4-layer DL
MIMO on 100 MHz with this message:
P7 unpack message length is greater than the message buffer
Further, increase the type of various (segment-related) variables to 32
bits. Currently, the maximum segment size is sxt to 65000 bytes (and in
will likely remain, because the maximum UDP size is 65536);
nevertheless, increase it in case we will ever go beyond this.
See also commit dee68e6319 ("nFAPI: increase maximum segment size to
65000")
Simplify usage of the old segment decoding libraries with the slot coding interface
This MR transforms the segment coding libraries into slot coding
libraries by statically linking the adaptation layer and the segment
coding libraries.
Therefore they can be used directly in ldpctest which uses the segment
coding interface as well as in all the other PHY simulators and the NR
softmodem which use the slot coding interface.
It is not anymore needed to use the
--nrLDPC_coding_segment.segment_shlibversion
flag. Instead a segment coding library can be directly chosen with
--loader.ldpc.shlibversion
since it implements the slot coding interface.
* added fgs_mm_mode_t enum
* added struct member to NAS
* modes: FGS_IDLE, FGS_CONNECTED
* according to 5GS mobility management (5GMM) modes 5.1.3.2.1.1 of TS 24.501
The variable block_length had an ambiguous role and was used as both K and Kprime.
This was leading to arrays with wrong sizes and functions with wrong arguments.
Now there is not anymore block_length but K and Kprime.
Kprime can be set with the command line argument `-l`.
There was also some problems with array allocation for segments with length not divisible by 8.
A proper sizing with `((size_in_bits + 7) & ~7) / 8` was used.
A proper masking of the last byte containing payload bits was also added to keep filler bits to 0 after random initialization.
The name ldpc8blocks_coding_segment was previously used to avoid any confusion with ldpc8blocks while both were coexisting.
They are not anymore coexisting so it can now be shortened.
While timers were available for rate matching and interleaving in the new interface,
these timers were not merged to rate matching and interleaving timers in nr_dlsch_coding.
Integration: `2025.w05`
Closes#885
See merge request oai/openairinterface5g!3233
* !3102 Dockerized development environment
* !3185 Add IQ file recording and IQ file viewer to ImScope
* !3218 more layer1 cleaning
* !3224 Ensure execution of processSlotTX in order in NR UE
* !3231 Bugfix in frame and slot setting for ULSCH beam allocation
* !3229 Verify the integrity protection of the RRCReestablishment message
* !3230 FHI72: fix for single distributed antenna array for xran F release
* !2984 NAS 5GS refactor
* !3235 Parametrized JenkinsNode and JenkinsResource
* !2799 Changes to support multiple TDD patterns
* !3208 Downgrade gNB power limit LOG from "warning" to "debug"
Robert Schmidt