reversing bits is not NR specific. Think of it like this: LTE code might
use reverse_bits*() as well, but in the old location, it would pull in a
bunch of NR dependencies that are superfluous.
Remove VCD signal dumper from NR code
We don't test VCD in 5G NR code (and haven't tested it in 4G for years).
Remove the VCD traces in 5G code to avoid any ambiguity. 4G code remains
in place, as well as the tools to analyze existing traces.
Move the module cmake code to its subdirectory for better organization,
and remove superfluous include_directories() that are not recommended
to be used (as it populates all other targets with those directories,
most of which don't need it anyway).
Slightly clean up the module by removing headers to unused dependencies.
The GTP module has a dependency to 4G and 5G RLC, which should not exist
(the RLC modules have a dependency on GTP, not the other way around),
but in this commit, make as little modifications as possible.
Compile all targets in Ubuntu build to avoid breakage of software.
Remove ldd in build dockerfile, as we don't need that (can also be
inspected manually).
- Add more sampling rates to support, e.g., 40MHz in 5G
- Allocate memory only at end to avoid memory leaks in case of failure
- Group recurring configuration functionality in configure_channel() to
reduced code duplication and uniform output
- Read maximum TX gain to set maximum automatically, and analogous to
USRP radio lib
- Check if BladeRF config (buffer size, num transfers, ...) fulfills
requirements as specified in documentation [1]
- Set BladeRF logging early to see BladeRF output
[1] https://www.nuand.com/bladeRF-doc/libbladeRF/v2.6.0/group___f_n___s_t_r_e_a_m_i_n_g___a_s_y_n_c.html#ga72752f2a047b95544e7686596a409abd
Co-authored-by: Brice Robert <robert@eurecom.fr>
Closes: #845
Don't enable radios twice, and only do it on device startup. Simplify
that function by using a new BLADERF_CHECK macro that checks return
codes and that will be reused in the following commits.
There is no reason to not allow
./build_oai -I -w USRP -w BLADERF
To install USRP and BladeRF together (which will be used in the CI in a
later commit). Fix this.
In this case, there are a number of linker errors:
/usr/bin/ld: libL2_NR.a(rrc_gNB.c.o): in function `nr_rrc_transfer_protected_rrc_message':
/home/richie/oai/openair2/RRC/NR/rrc_gNB.c:330:(.text+0x6f6): undefined reference to `signal_rrc_msg'
However, nr_srssim does not need RRC, while it is being linked in. Thus,
link without nr_rrc and L2. For the remaining two linker problems:
- provide a definition of NR_IF_Module_init() as in most other
simulators
- move rrc_get_max_nr_csrs() to nr_common.c. It is already declared in
the corresponding header, and itself does not have anything to do with
RRC radio configuration, therefore it does not belong to
nr_radio_config.c
Fix for split 7.2 DU configurations including DU & RU ethernet addresses
Fix parsing of DU configurations that include both RU and DU ethernet
addresses in the fhi_72 section. The extraneous DU addresses are used in
MPlane to configure the RU.
RRC QoS refactor: PDU Session Modify support, SDAP fixes, and code improvements
The goal of this MR is to prepare the RRC/NGAP layer for the multi-QoS
support. The MR:
- enables PDU Session Resource Modify support in RRC/NGAP/E1AP
- fixes SDAP header mapping
- enables SDAP by default
- refactors QoS flow handling in RRC/NGAP
- improves error handling, and code maintainability in RRC/NGAP
Changes:
- NGAP PDU Session Modify:
* add NGAP PDU Session Resource Modify Request/Response handling with
proper error reporting for unrecognized sessions and AMF UE NGAP ID
validation
- E1AP Bearer Context Modification:
* add DRB To Remove List IE to support DRB release during modify
* rename numQosFlow2Setup to numQosFlowsMod in DRB To Modify List
- RRC QoS flow handling:
* enable multi-QoS flow support per DRB
* add utilities to map NGAP QoS parameters to E1AP
* filter QoS flows by DRB ID
- SDAP configuration:
* Fix SDAP header UL/DL mapping between internal representation and
ASN.1 enum (invert mapping)
* change SDAP header fields from long to bool for clarity
- F1 DRB setup refactoring:
* Extract shared helpers for F1 DRB setup list filling
* reduce duplication between E1 response and direct DRB setup paths
- AMBR management:
* Store AMBR in UE context
* validate AMBR is set before bearer setup
- Configuration:
* remove unused drbs configuration parameter
* enable SDAP by default (change default from false to true)
RAN-SA-2x2-Module-CN5G performs tests not only with 2x2 but also with a 4x4 MIMO
configuration. The pipeline name has been generalized to RAN-SA-Multi-Antenna-CN5G
to cover multiple antenna configurations.
Integrate GPU-Accelerated Channel Simulation + CI Test Pipeline
This MR builds on top of MR !3588 (feat: GPU Accelerated Channel
Simulation Pipeline).
The main portion of the changes is directly taken from MR !3588, and
focuses on integrating the GPU-accelerated channel simulation. On top of
that, this MR adds CI-related configurations to introduce a new channel
simulation testing pipeline into the CI --> RAN-Channel-Simulation
This MR introduces a CUDA-based pipeline to offload the
multipath_channel and add_noise channel simulation functions to the GPU.
This enables large-scale, real-time physical layer simulations not
possible on the CPU.
For full documentation, please see the file at openair1/SIMULATION/TOOLS/DOC/gpu_acceleration.md.
System & Compiler Requirements: An NVIDIA GPU with a compatible driver
and the CUDA Toolkit installed.
This feature was developed and tested on the GH200 server using the GCC
12 toolchain. To ensure reproducibility, building with GCC 12 is highly
recommended. Build Instructions
The primary flag to enable this feature is -DCUDA_ENABLE=ON. The
following command shows a sample configuration used during development
on the GH200 server:
./build_oai --phy_simulators --cmake-opt "\
-DCUDA_ENABLE=ON \
-DUSE_UNIFIED_MEMORY=ON \
-DUSE_ATS_MEMORY=OFF \
-DCMAKE_C_COMPILER=/usr/bin/gcc-12 \
-DCMAKE_CXX_COMPILER=/usr/bin/g++-12 \
-DENABLE_TESTS=ON"
Memory Model Configuration
The pipeline supports multiple CUDA memory management modes, which can
be configured at compile time. ATS Memory (-DUSE_ATS_MEMORY=ON) is
enabled by default. To use another memory model, you must first disable
ATS.
For a detailed explanation of these models, please refer to Section 3 of
the gpu_acceleration.md report.
vrtsim: add CIR DB playback with CLI flags
VRTSIM: CIR DB playback via CLI
This change adds an optional in-process CIR DB path to VRTSIM. When
enabled with --vrtsim.cirdb and optional --vrtsim.cirdb-path, VRTSIM
reads precomputed taps from cir_db.bin. Default behavior is unchanged
when the flag is not set.
Build
cmake ../../ -GNinja -DOAI_VRTSIM_CIRDB=ON -DOAI_VRTSIM_TAPS_CLIENT=OFF
cmake --build . --target vrtsim
How to run
gNB
sudo ./nr-softmodem \
-O ./targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf \
--device.name vrtsim \
--vrtsim.role server \
--gNBs.[0].min_rxtxtime 3 \
--vrtsim.cirdb 1 \
--vrtsim.cirdb-path /home/merkeb/oai-cir-emitter/cir_db.bin
UE
sudo ./nr-uesoftmodem \
-C 3619200000 -r 106 --numerology 1 --ssb 516 --band 78 \
--device.name vrtsim
Expected logs
- VRTSIM prints that channel modelling is active and uses DB backed taps
- CIRDB ready: model=..., shape=Tx x Rx, L=..., S=..., fs=..., dt=...,
speed=...
CLI behavior and fallbacks
- TAPS client and chanmod paths are unchanged
- If --vrtsim.cirdb is not set or equals 0, VRTSIM uses the existing
channel model path
Add fallbacks for ARMv8a to make it compile
The current code, on ARM, uses ARMv8.1-A RDM instructions. Add a
fallback for processors that do not have this instruction set.
Add some specific compile options for this platform.
Add debian 12 to the list of architectures.
- Change gNB RRC enable_sdap default to true
- Update RRC and RUNMODEM docs to reflect new default behavior
- Clean up CI gNB configs by removing redundant enable_sdap=1
- Keep explicit SDAP disable config for NFAPI gNB VNF
According to TS 38.413:
* AMBR is conditional to PDU Session Resource to setup in the Initial UE
Context Setup procedure
* The UE Aggregate Maximum Bit Rate IE should be sent to the NG-RAN node
if the AMF has not sent it previously. If it is included in the PDU
SESSION RESOURCE SETUP REQUEST message, the NG-RAN node shall store
it in the UE context
* Range is INTEGER [0..4,000,000,000,000]
To this purpose, changes in the commit:
* Init AMBR to out of range value when creating UE context
* Store AMBR in UE context whenever is received
* Assert if not set at the time of Bearer Setup (should be known at that stage)
Compute ssPBCH_BlockPower from RU max TX power and bandwidth
ssPBCH_BlockPower = P_TX(dBm) − 10 x log10(N_RB x 12)
Assume P_TX = 24 dBm for indoor RUs and 35 dBm for outdoor RUs.
Fix parsing of DU configurations that include both RU and DU ethernet
addresses in the fhi_72 section. The extraneous DU addresses are used
in MPlane to configure the RU.
Robert Schmidt