- calculation in float: should be enough precision (it'll go into 16bit
ints later...)
- avoid round: the lower 15bits will be shifted away, the rounding will
have no effect
- group some multiplications to avoid re-computation of the same
results.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
- all RAN code, CI code, configuration files, dockerfiles, in CSSL v1.0
- all deployment code (openshift, charts, ancillary files like shell
scripts), in MIT
- documentation in CC-BY-4.0
- exceptions might apply and are listed in NOTICE
- there is a new LICENSES folder with all licenses
- CONTRIBUTIONS.md has been updated accordingly
For automated changes based on OAI PL v1.1:
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.{c,h,cpp}
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.ts
perl -i~ -0pe 's/<!--.*Licensed to the OpenAirInterface.*openairinterface.org\n.*-->/<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->/s' **/*.xml
The rest (cmake, files with missing license, cmake) manually.
Use flat buffer for txdataF in gNB L1
This MR changes txdataF buffer format to hold freq domain data starting from
PRB0 instead of circular buffer that starts from PRB N/2. The motive is to
simplify RE mapping function in L1 and copying data to xran lib.
So far txdataF buffer has DC RE as the first element. This was prefered
most likely to avoid memcpy before iFFT but comes with a small
complexity in RE mapping functions.
Instead, we use a flat buffer that holds freq domain data starting from
first negative SC. After resource mapping is done on all channels, each
OFDM symbol is shifted before iFFT so that the buffer start with DC RE.
This reduces complexity in mapping functions and later on when passing
beam IDs to 7.2 split RU especially when a beam is associated to
interleaved RB and/or REs.
There is already a memcpy in place to copy txdataF from gNB stuct to RU
struct. So this change does not introduce new memcpy.
Actual problem is that SYNC does not happen on the target cell as frame parameters is not updated
and ssb start carrier is not correct in the UE frame parameters
function nr_get_ssb_start_sc to determine ssb_start_subcarrier
- We use the same function at gNB and UE.
- We always use nb_antennas_tx to check the max possible number of ports (which is wrong).
- At gNB, we should use nb_antennas_rx and at the UE, we should use nb_antennas_tx.
NR UE: fix bug for SRS generation when freqDomainShift (n_shift) is not 0
According to TS 38.211 section 6.4.1.4.3, the frequency domain shift value
n_shift is from higher-layer parameter freqDomainShift. The quantity n_RRC
is given by higher-layer parameter freqDomainPosition. Also corrected
k_0_overbar_p calculation formula to align with standard.
According to TS 38.211 section 6.4.1.4.3, the frequency domain shift value n_shift
is from higher-layer parameter freqDomainShift.
The quantity n_RRC is given by higher-layer parameter freqDomainPosition.
Also corrected k_0_overbar_p calculation formula to align with standard.
The functions nr_generate_csi_rs() and nr_ue_generate_csi_rs() are
identical. This commit removes nr_ue_generate_csi_rs() and moves
nr_generate_csi_rs() to nr_phy_common_csirs.c so both gNB and UE can use
the same function.
Delay compensation for PUCCH2
- Implementation of delay compensation for PUCCH2, which minimizes for
exampe logs "reported RSRP index XXX invalid"
- Adding a test to the CI to perform the delay compensation in PUCCH2
- Refactor code to use c16_t data type in PUCCH decoder
francescomani