saves about 600MB of memory allocation
Move the definition of PRACH items and the PRACH list to the
defs_nr_commons.h file.
Do not re-write the entire structure in nr_schedule_rx_prach(), as it is
quite large now.
The function rx_nr_prach become autonomous, it doesn't read anymore global variables
So, it can become (later) a threadpool work, that will send a message when it finishes
rx_nr_prach_ru() still use some global variables, but it is executed in sequence, inside the ru main loop, that limits the probability of race conditions
Refactor SDAP adaptation work for QoS
This MR is an adaptation of the code introduced in !2703.
The goal is a cleanup and functional refactor of the SDAP/PDCP
integration, that is:
- centralize SDAP configuration logic
- simplify entity creation
- improve robustness of role-based SDAP handling
- prepare the codebase for clean support of DRB reconfiguration and
teardown flows
More concretely:
1. New sdap_config_t and get_sdap_Config()
- Introduced an internal struct sdap_config_t to abstract SDAP config
input
- Centralized SDAP config parsing into new get_sdap_Config() function
that translates ASN.1 NR_SDAP_Config into this internal
representation. This is called during RRC triggered
(re)configuration procedures.
- Enable mapping of number of QoS flows > 1
2. Unified role handling with bitmasks
- Added a bitmask-based entity_role field to track SDAP directions:
SDAP_UL_RX, SDAP_UL_TX, SDAP_DL_RX, SDAP_DL_TX: header presence was
determined by simple direction (UE vs gNB) and individual
is_sdap_rx/tx() checks, however nr_sdap_rx_entity behaves
differently depending on the direction of the RX entity (DL/UL),
therefore this change can help enable a more accurate SDAP header
handling across directions and node types.
- Replaces old helpers is_sdap_rx() / is_sdap_tx() with internal
checks against the role bitfield
- QFI-to-DRB mapping is now annotated with direction for both data and
control PDUs
3. Simplified DRB and SDAP setup
- add_drb() in PDCP API now delegates SDAP config processing cleanly
- new_nr_sdap_entity() is used consistently to register a fresh SDAP
context for the UE and PDU session.
- Also, re-use and reconfigure existing SDAP entity if already
exists.
- logging has been added to trace mapped QFIs from RRC and resulting
table entries
4. Improved QFI-to-DRB management
- Refactored nr_sdap_qfi2drb_map_update() to register QFIs based on
parsed config
- Ensures control PDUs are correctly routed even after reconfiguration
- Extended nr_sdap_ue_qfi2drb_config: perform UL QoS flow to DRB
mapping configuration for a SDAP entity has already been established
according to TS 37.324, 5.3 QoS flow to DRB Mapping, 5.3.1
Configuration Procedures. Handle both UL QoS Flows mapping rules to
add and to remove. QFIs will now be properly unmapped if specified
via mappedQoS_FlowsToRelease, this might prevent stale QFI mappings
from being used incorrectly.
- nr_sdap_qfi2drb() and sdap_map_ctrl_pdu() now strictly fallback to
default_drb only if a QFI mapping is missing. Missing default DRB
now triggers LOG_E() (previously silent or misrouted to DRB 0).
5. Other cleanup
- Remove dependencies from legacy rb_id_t
- Remove rb_id parameter from nr_sdap_tx_entity() function signature
- Update tx_entity function pointer
- Remove rb_id parameter from sdap_data_req() function signature
- Remove unused rb_id variable from sdap_tun_read_thread
The rb_id parameter was redundant since SDAP determines DRB ID
from QFI mapping via entity->qfi2drb_map(entity, qfi). This
simplifies the interface.
fix direct bugs of not used RU_RX_SLOT_DEPTH defined constant
with this commit, the gNB can work if we change RU_RX_SLOT_DEPTH to
another value than 4 but it remain not well designed
UE symbol based PDCCH receiver
This is a partial rebase/rewrite of !2895
The goal of this MR is to check how we can merge this.
The eventual result is stated in !2895. The way forward is to modify UE
RX procedures to work symbol by symbol by extracting the symbol loop out
of RX procedures. After all channels are modified this way, the main
thread can be modified to work symbol by symbol.
At this point only PDCCH was modified.
1.Create new funtion nr_symbol_fep() to do OFDM demod of one symbol on
all antennas. This is called by nr_slot_fep() for now. In the
upcoming MR, this function will be called directly after reading
each OFDM symbol from the radio.
2.Removed redundant memory alignment. DFT function performs memory
alignment if the input memory is not aligned.
Support beam index in OAI 7.2 Fronthaul Interface
This branch supports beam index in OAI 7.2 Fronthaul Interface.
- For CP DL (PDSCH), nBeamIndex of the corresponding prbMapElm is set
when sending IQ data in oran_fh_if4p5_south_out. nBeamIndex of the
corresponding prbMapElm is set when sending IQ data in
oran_fh_if4p5_south_out.
- For CP UL (PUSCH and PRACH), nBeamIndex of the corresponding prbMapElm
is set in oran_fh_if4p5_south_out.
In addition, it fixes a couple of issues
- XRAN hardcodes nBeamIndex of PRACH to zero. Modify XRAN to support
setting of nBeamIndex of PRACH and update xran F release patch.
- Fix the bug in calculating fh_config->neAxc where num_beams_period is
multiplified twice
Testing methodology: Use Benetel O_RU for testing even though it does
not support beamforming. With successful registration and data transfer,
one could check the pcap on the fronthaul interface to see if CP packets
are with the right beam index.
Results:
1. Verified that CP-packets for SSB, DCI, PDSCH, PRACH, PDSCH, PUSCH,
CSI-RS and SRS are with the right beam index
2. Verified that there is no side-effect on Benetel O_RU. UE could
register properly.
3. Verified 4 SSB with ssb_PositionsInBurst_Bitmap = 85. Could see SSB
and PRACH with 4 different indices.
RFSim test for 10 UEs/process
This MR adds a testcase and changes required to run 10 UEs in a single
process with RFSim
- Added deregistration for all connected UEs
- Refactored MAC/RRC instance handling
- made map_current_symbol thread safe
- made opeanir0_cfg thread safe and local
- Added 10UE/process testcase
- Replaced ITTI message queues with notifiedFIFO for RRC to MAC communication in UE.
- Enables correct message delivery to multiple MAC instances running in parallel threads.
- Introduced `nr_mac_rrc_message_t` union for MAC-RRC messages.
- Updated all relevant message handling and initialization code to use notifiedFIFO.
- Use MAX_NUM_NR_UE_INST in NR UE MAC to control number of MAC instances.
- Modify the MAC interface slightly so that nr_l2_init_ue only initializes one instance
Use MAX_NUM_NR_UE_INST for number of NR UE RRC instances. Change the RRC
interface slightly so nr_rrc_init_ue initializes only one RRC instance pointed
to by the id given to the function
RF emulator and improvements of the timers
RF emulator:
Add an RF library emulating a real device without the need of a real
device. This is thought to enable using phy-test without requiring a
radio device or channel simulation. The library synchronizes on the
real time clock, drops TX and generate noise on RX. Noise generation
can be disabled and the noise level configured.
Timers improvements:
- Fix standard deviation for merged timers
- Add display of ULSCH decoding timers
- Add decoding timer in AAL
2 functions with same name as static to make it clearer they are separate.
remove unused copy of log_level global var.
remove threequarter sampling variable from the radio board general
configuration. The decision of sampling rate is made above. A better
behavior can be done later, like ask to the radio board what sampling
rate it can do,then use it to decide the appropiate sampling rate from
the gNB configuration. In UE case, it is another issue, as the sampling
rate would change after we decode SIB1, but also it is not developped
yet.
Remove the --usim-test option: to my knowledge, it's not used by users,
and is misleadingly placed in various places where there should not be a
difference w.r.t. USIM configuration.
When making the changes, I assumed that --usim-test would be 0 (the
default), which is the case in all executables when not specified in
options except for the nr_dlsim, nr_pbchsmi, nr_ulsim simulators.
The only exception is the initialization of PDCP from the MAC, which is
not correct (the PDCP is in the CU, so it does not make sense to call it
from the MAC which is in the DU). Instead, always initialize from main,
even in the NSA case (NSA was covered by the incorrect initialization
from MAC).
This in turn let to some more cleanup around function du_rlc_data_req().
After receiving GTP packets at the DU, they were given to the PDCP to
enqueue the packet at RLC. This does not work anymore, since the PDCP is
not initialized; it also does not seem necessary, as this enqueue
functionality is necessary to decouple PDCP and RLC to avoid deadlocks
in monolithic, but in split-mode, this cannot happen. Instead, call
directly into the RLC when receiving GTP packets.
NR UE: Enable additional PDU session
- fix a bug with wraparound of buffer_remain_ep
- Add --extra-pdu-id command line option
Testing procedure:
1. Start cn in openairinterface5g/doc/tutorial_resources/oai-cn5g with
docker compose up
2. Start gnb:
sudo ./nr-softmodem -O ../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf --gNBs.[0].min_rxtxtime 6 --rfsim --rfsimulator.server_address server
3. Monitor extra interfaces being created:
watch -n 0.5 "ifconfig | grep tun"
4. Start UE:
sudo ./nr-uesoftmodem -C 3619200000 -r 106 --numerology 1 --ssb 516 --band 78 --rfsim --uicc0.imsi 001010000000001 --extra-pdu-id 11
5. An extra tun interface oaitun_ue1p11 should be created. Observe in
the terminal from step 3
6. Ping the core network from both interfaces, e.g., ping -I
oaitun_ue1p11 10.0.0.1, ping -I oaitun_ue1 10.0.0.1. This should
generate traffic on the gNB on different LCIDs.
RF simulator: Fix concurrency issues during new client connections
- Fix concurrency issues happening when a new client connects, sometimes
leading to a total softmodem deadlock.
- trace in 4G RAR processing to debug ci result
Laurent THOMAS