To be used in a later commit to retrieve NR PDCP configuration
parameters.
To use, add the following to the configuration file (outside of other
configurations). Adapt the values to your setup. The names ("len18bits",
"ms100", etc.) come from 3GPP TS 38.331.
pdcp = {
drb = {
sn_size = "len18bits"
t_reordering = "ms100"
discard_timer = "infinity"
}
}
Default values are applied if the configuration is absent.
The default values are the ones given above.
To be used in a later commit to retrieve NR RLC configuration
parameters.
To use, add the following to the configuration file (outside of other
configurations). Adapt the values to your setup. The names ("ms45",
"size12", etc.) come from 3GPP TS 38.331.
rlc = {
srb = {
t_poll_retransmit = "ms45"
t_reassembly = "ms25"
t_status_prohibit = "ms0"
poll_pdu = "infinity"
poll_byte = "infinity"
max_retx_threshold = "t8"
sn_field_length = "size12"
}
drb_am = {
t_poll_retransmit = "ms45"
t_reassembly = "ms15"
t_status_prohibit = "ms15"
poll_pdu = "p64"
poll_byte = "kB500"
max_retx_threshold = "t32"
sn_field_length = "size18"
}
drb_um = {
t_reassembly = "ms15"
sn_field_length = "size12"
}
}
Default values are applied if the configuration is absent.
The default values are the ones given above.
Move RRC radio parameters file to DU
A number of radio-related RRC parameters, e.g., CellGroupConfig, "originate" at
the DU and are sent to the CU for forwarding to the UE only. Similarly, there
are additional parameters, e.g., RLC-BearerConfig (part of CellGroupConfig),
that originate at the DU.
Hence, the DU decides about these parameters, depending on the MAC state and
capabilities. To clarify this, move the existing
openair2/RRC/NR/nr_rrc_config.{c,h} => openair2/LAYER2/NR_MAC_gNB/nr_radio_config.{c,h}
So that developers know that while those are RRC parameters, they originate at
the DU.
In other words, the CU/RRC is not supposed to use any of these functions in
the RRC. Correspondingly, includes of this file have been cleaned up (and when
they are not necessary at the MAC as well)
A number of radio-related RRC parameters, e.g., CellGroupConfig,
"originate" at the DU and are sent to the CU for forwarding to the UE
only. Similarly, there are additional parameters, e.g., RLC-BearerConfig
(part of CellGroupConfig), that originate at the DU.
Hence, the DU decides about these parameters, depending on the MAC state
and capabilities. To clarify this, move the existing
openair2/RRC/NR/nr_rrc_config.{c,h} => openair2/LAYER2/NR_MAC_gNB/nr_radio_config.{c,h}
So that developers know that while those are RRC parameters, they
originate at the DU.
In other words, the CU/RRC is not supposed to use any of these functions
in the RRC. Correspondingly, includes of this file have been cleaned up
(and when they are not necessary at the MAC as well).
prepare_scd() sets up memory for possible dedicated BWPs to be set up.
If they are not used, they are freed in fix_scd(). [1]
There are two problems:
1. in prepare_scd(), multiple structures are allocated once (for
multiple elements), but inserted once. When trying to free those, the
logic of ASN.1 is to free list elements individually, but then we try
to call free() on each element of the list that has been allocated in
one go. Fix this by doing multiple allocations to be in line with
ASN.1 logic.
2. in fix_scd(), free recursively all data structures, not only the
sequence element itself.
[1] this is horrible. We should only allocate memory if we actually need
it, but let's fix the more urgent problem of memory leaks first. Fixing
the logic problem would be more involved.
Enable SSB-SINR based CSI reporting
3GPP 38.331 release 16 specifies that If the field reportQuantity-r16 is present,
UE shall ignore reportQuantity (without suffix). reportQuantity-r16 configures
SSB based SINR as the reporting quantity.
set do_SINR = 1; in gNB params part of the config file to enable SSB based SINR
reporting.
3GPP 38.331 release 16 specifies that If the field reportQuantity-r16 is present, UE shall ignore reportQuantity (without suffix).
reportQuantity-r16 configures SSB based SINR as the reporting quantity.
set do_SINR = 1; in gNB params part of the config file to enable SSB based SINR reporting instead of the default RSRP based.
Replaced `sprintf` with `snprintf` in gnb_config.c to enhance memory safety
by preventing potential buffer overflows. `sprintf` can cause buffer overflows
by not checking the destination buffer size. In contrast, `snprintf` allows
specifying a maximum buffer size, ensuring no overflow occurs by limiting
the number of characters written, including the null terminator.
fix NTN LEO scenarios
- gNB: add support for NTN parameter ta-CommonDrift-r17
- NR UE: fix application of NTN TA information
- NR UE: add command line parameter ntn-initial-time-drift to compensate
time drift during initial sync
- NR UE: fix writeTimestamp inconsistencies
- NR UE: add MAC state UE_RECEIVING_SIB ensuring to start RA only after
successfully receiving SIBs
- rfsimulator: update earth radius for LEO simulation to match UE
position in ue.conf file
- update conf files for NTN LEO scenario
- update description how to run NTN scenarios in RUNMODEM.md
- fix: ta-Common is a round-trip-time, not a one-way delay
- NR UE: simplify calculation of next_tx_slot_and_frame by moving up
assignment of duration_rx_to_tx
- cellbarredNTN indicates notbarred in SIB1 if NTN access is available
- Removed b66 NTN and enabled B254 NTN conf file in CI
- NR UE: RRC layer now explicitly tells MAC layer when the RA procedure
can be started
- move NTN LEO config to band 254 and update doc/RUNMODEM.md
Closes#901
* allocate memory for pattern2 only if the IE is present (it is optional)
* fix scc (deallocate memory) when necessary
Co-authored-by: Guido Casati <guido.casati@firecell.io>
- Introduced new configuration parameters `pusch_RSSI_Threshold` and `pucch_RSSI_Threshold`
(MACRLC section)
- Added `nr_limit_tpc` function in `gNB_scheduler_primitives.c` to limit TPC based on RSSI
threshold.
- Integrated `nr_limit_tpc` in PUCCH and PUSCH power control
Example Configuration
puxch_RSSI_Threshold takes value between -1280 and 0 and is mapped to range -128.0 dBm/dBFS
to 0.0 dBm/dBFS in 0.1 dB increments. Unit depends on RSSI reporting config.
pucch_RSSI_Threshold = -500; # Set the PUSCH RSSI threshold to -50.0dBm/-50dBFS
pucch_RSSI_Threshold = -600; # Set the PUCCH RSSI threshold to -60.0dBm/-60dBFS
Cedric Roux