The existing ltebox startup sequence on nepes occasionally fails.
Running
sudo su -c 'screen -dm -S simulated_hss /opt/hss_sim0609/starthss' \
&& sleep 1 && sudo /opt/ltebox/tools/start_mme && sudo /opt/ltebox/tools/start_xGw \
& sleep 1 && ip a show dev tun1
Reliably shows that no tun1 interface is created, because that takes
around 1s itself. Increasing the second sleep to 2 reliably deploys it
correctly.
Do the same for sabox and ltebox on nano for consistency.
Signed-off-by: Robert Schmidt <robert.schmidt@openairinterface.org>
CI: Add stage to push to local git repository
This MR includes minor code cleanup and fixes for warnings reported by Jenkins.
It also introduces a new stage in ci-scripts/Jenkinsfile-GitLab-Container that
pushes the branch to a local repository after the merge. In a follow-up MR,
this local repository will be used as the source for cloning the branch,
replacing direct access to GitLab/GitHub.
Did you forget the `def` keyword? WorkflowScript seems to be setting a field named JOB_TIMESTAMP (to a value of type String) which could lead to memory leaks or other issues.
Did you forget the `def` keyword? WorkflowScript seems to be setting a field named MR_NUMBER (to a value of type String) which could lead to memory leaks or other issues.
Remove a lot of unused code, defines, and config options
Remove unused header files and defines.
Slightly clean up gnb_config.c by removing all _IDX variables. Remove
these unused parameters:
- MACRLCs.[0].num_cc
- MACRLCs.[0].local_n_portc
- MACRLCs.[0].remove_n_portc
- MACRLCs.[0].remote_s_portc
- MACRLCs.[0].remote_s_portd
- L1s.[0].num_cc
- L1s.[0].local_n_portc
Declare `localStatus` and `localResult` as local variables in `triggerSlaveJob`
and `triggerCN5GSlaveJob` functions by adding `def`.
This prevents unintended use of global variables in pipeline and avoids
potential variable leakage or conflicts between stages.
Follows the Jenkins recommendation:
Did you forget the `def` keyword? WorkflowScript seems to be setting a field named localStatus (to a value of type RunWrapper) which could lead to memory leaks or other issues.
Did you forget the `def` keyword? WorkflowScript seems to be setting a field named localResult (to a value of type String) which could lead to memory leaks or other issues.
Remove the gNB_MAC_INST.eth_params_s, since it's only purpose is to
store what can be on the stack.
For the Aerial log message, don't print an empty prefix but what is
actually used for Aerial.
- remove test_multipath and test_noise from ChanelSim tests of
RAN-Channel-Simulation pipeline - will be executed together with the
other CUDA-enabled unit tests
- enable configurable dockerfile, runtime-opt, and ctest-opt parameters in
the XML file for the Build_Run_Tests step
- pass runtime options to `docker run` to support ctest execution with CUDA
- allow additional ctest options for selective test execution and labeling
Integrate channel pipeline library with vrtsim with two acceleration
options chosen at compile time:
- threadpool if CUDA support is disabled
- CUDA otherwise
- all RAN code, CI code, configuration files, dockerfiles, in CSSL v1.0
- all deployment code (openshift, charts, ancillary files like shell
scripts), in MIT
- documentation in CC-BY-4.0
- exceptions might apply and are listed in NOTICE
- there is a new LICENSES folder with all licenses
- CONTRIBUTIONS.md has been updated accordingly
For automated changes based on OAI PL v1.1:
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.{c,h,cpp}
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.ts
perl -i~ -0pe 's/<!--.*Licensed to the OpenAirInterface.*openairinterface.org\n.*-->/<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->/s' **/*.xml
The rest (cmake, files with missing license, cmake) manually.
Remove the \file directive, as it is always superfluous because the
current file is implicit [1]:
> If the file name is omitted (i.e. the line after \file is left blank)
> then the documentation block that contains the \file command will belong
> to the file it is located in.
Author names and e-mails are not relevant for us: it can always be
inferred from git blame, and is often outdated.
Eurecom code has been contributed and was under OAI PL v1.0/v1.1.
For the cpack package contact: put generic email address that is
independent of an individual and that will remain reachable.
[1] https://www.doxygen.nl/manual/commands.html#cmdfile
Adjust target SNR values and introduce RSSI thresholds in the VNF configuration
files to prevent UL saturation. These changes improve uplink stability and
performance for tests with Aerial and WNC RU.
Fix Delta MCS mode, reimplement UL power control
This change set fixes the "delta-MCS" mode, and reimplements the UL power
control loops at gNB, i.e., for PUSCH and PUCCH. It further adds new T traces
to log PUSCH/PUCCH power infrmation, and cleans up code.
The "delta-MCS" mode in OAI refers to configuring a UE with deltaMCS in the
PUSCH-PowerControl IE (see TS 38.331). In this mode, the UE adjusts the PUSCH
power for transmissions to take into account for MCS (see TS 38.213 Sec. 7.1).
In other words, the target SNR can be set to a somewhat low value, and the UE
will still use the right power for UL transmissions. Note that the spec only
foresees this adjustment of UL power when using one layer. In contrast, in the
"normal" mode, the gNB sends TPC commands to keep a UE at a fixed target SNR
(default: 20dB), regardless of the MCS or number of layers. Future work is
planned to completely remove this fixed target SNR, which is not done in this
MR yet.
Further, there is a new power control loop implementation. Prior to this MR, on
each UL transmissions, the gNB uses the SNR to decide about TPC sent to a UE in
the next transmissions. The new implementation relies on averaging the SNR, and
a "TPC in flight" average to account for the slow reaction of the average SNR.
The sum of both quantities is the current SNR that is used by the UE. See the
commit messages or documentation for more information.
Further cleanup to group data (e.g., power control configuration, refactoring of
code to save space, ...) is done. Two new T traces GNB_MAC_PUSCH_POWER_CONTROL
and GNB_MAC_PUCCH_POWER_CONTROL are added; documentation exists to explain how
to graphically plot corresponding graphs.
Do not limit DL power, because it is not done in the other pipelines
either. Set the UL target power high, as this increases the achievable
throughput high (PUCCH can be normal). Finally, increase BLER thresholds
to improve the MCS a bit.
Remove old CUDA LDPC implementation
A new implementation is under way in !3955. To simplify the MR, remove the old
LDPC CUDA implementation in a first step.
* Option to build ldpc_cuda was remaining in the build script
* Build script option to build ldpc_cuda was still used in CI
* Mentions of ldpc_cuda were remaining in the documentation
Note: In the documentation, the example of ldpctest usage that was
loading ldpc_cuda was replaced by an example in which it is loading
ldpc_orig even though this is pointless as it makes ldpctest compare
ldpc_orig with ldpc_orig. On the other hand, it is the only library
other than the default ldpc that uses the former interface.
CI: Add FHI7.2 phytest pipeline
This MR consists of multiple changes related to FHI7.2 setups in CI.
- remove unused fhi72 configurations in CI
- introduce dpdk-init service in fhi72 deployments to setup sriov on the machine
- update phytest fhi72 configurations for running on bulbul
- add phytest fhi72 to RAN-SA-FHI72-CN5G pipeline
- Introduce dpdk-init service for SR-IOV initialization within the container
- Execute script to enable low-latency RT performance (restored after tests)
When running phytest with FHI7.2 in Docker, two services are deployed:
dpdk-init and oai-gnb. Previously, AnalyzeRTStatsObject selected the
first deployed service for RT stats analysis.
Allow to explicitly select the service used for RT stats analysis instead
of relying on the first deployed service.
This extends the functionality provided by record in that it allows
collection of data into a Clickhouse database, allowing aggregation of
data from gNB and UE for functions like channel estimation for PUSCH
transmissions that did not decode successfully at the gNB.
It is intended to be used in conjunction with Aerial Data Lake but is
not limited to it. Data access is simpler than in !3462, but could be
improved using the metadata approach from !3462.
The integration uses logfmt for fast logging, and a clickhouse DB
client, both integrated using CPM.
This change set also adds a docker-compose file for a UE on 100MHz, to
be used with Aerial configurations, and builds the tracer for Aerial and
nrUE docker files.
CI: rework log analysis to simplify and allow new use cases
The CI has some log analysis, but it is unmaintainable (huge functions
that mix eNB/gNB or lteUE/nrUE, are not tested, most of it is not used
or useful...) or limited to specific use cases (the timing-phytest time
analysis is hardcoded to source builds instead of also handling analysis
when running from docker images). This MR reimplements both functions.
For the log analysis, the CI team decided to throw away the old
analysis, and reimplement a mechanism that checks the couple of things
we care for.
- Allow to analyze phy-test timing analysis from docker files, and add a
unit test
- Rework existing log analysis to remove useless checks, and make it
more composable
* The undeployment steps (Undeploy_Object(), Terminate_eNB()) take an
<analysis> XML object which then either has a <services> subelement
with check that are whitespace delimited (similar to how other xml
task steps have <services>). For checks that contain whitespace,
they can use <service> (singular) that encodes a single check, such
that e.g., arguments could include spaces.
* Each check is of form service=check[=arguments], where service is
the docker services, check is a checking function (implemented as a
class with run(file, options) function inside cls_loganalysis.py,
and options arguments after the second = that is to be read by run()
(basically, options will contain arguments that can be freeform)
* these definitions can occur multiple times, e.g., it could be
serviceA=Check1 and serviceA=Check2=Args and it will execute both
Check1 and Check2
* if a service is declared, it will execute alse the Default check
which currently checks for an assertion
* Implemented (and inspired from the existing CI analysis) are:
- Default check to check for assertions (will be extended, to e.g.,
address/undefined behavior sanitizer analysis)
- RetxCheck: retransmission check as used in the CI
- LastLineContains to check the last line containes a specific
string
- ContainsString to check a specific string appears in logs
- EndsWithBye: check that towards the end (but not necessarily the
last line), there is a Bye. string (a workaround since we don't
always terminate with 0)
- There is a plan to use return codes after stopping in docker, but most
executables do not end with 0 most of the time, such that we needed to
abandon this plan.
- Additional fixes (see commit messages) and delete unused code
GPU Channel Simulation: nr_dlsim/nr_ulsim Integration + CI Test
This MR is a follow-up to !3886 (merged) and extends CUDA-based channel
simulation support to nr_dlsim and nr_ulsim, together with the
corresponding CI tests.
The MR incorporates:
- Cherry-picked commits e0c204f7 and 5f344876 from !3588
- Integration of new CI physim tests using GPU-accelerated channel
simulation in nr_dlsim and nr_ulsim tests, see commit c727b3bb
New CI job: RAN-Channel-Simulation
https://jenkins-oai.eurecom.fr/job/RAN-Channel-Simulation/
Robert Schmidt