feat(ldpc_aal): Do not try EAL init if FHI 7.2 is enabled
When FHI 7.2 is enabled, the EAL initialization is done by the FHI and
the attempt to init EAL by ldpc_aal will fail. In that case, it is not
necessary neither to provide a DPDK core list for BBDEV.
This MR offers to skip EAL init in ldpc_aal when FHI 7.2 is enabled in
order to avoid error messages in the log and to allow dropping the
useless DPDK cores argument in that case.
Also add some fixes to the LDPC offload documentation.
[FHI72 M-plane] CM improvements and PM implementation
Configuration Management:
- addition of the RU username in the fhi_72 section of the config file;
previously hardcoded to oranbenetel
- modification of the frequency offset, frame structure, fft size,
cyclic prefix, and Tx gain;
- addition of the managed delay node;
for Tx/Rx endpoints.
Performance Management implementation where OAI gNB
activates/deactivates available RU performance measurements.
Performance Management support explanation.
Example run modified according to:
- modification of the frequency offset, frame structure, fft size, cyclic prefix, and Tx gain;
- addition of the managed delay node;
for Tx/Rx endpoints.
RF emulator and improvements of the timers
RF emulator:
Add an RF library emulating a real device without the need of a real
device. This is thought to enable using phy-test without requiring a
radio device or channel simulation. The library synchronizes on the
real time clock, drops TX and generate noise on RX. Noise generation
can be disabled and the noise level configured.
Timers improvements:
- Fix standard deviation for merged timers
- Add display of ULSCH decoding timers
- Add decoding timer in AAL
Align add_boolean_option as per CMake documentation use only ON/OFF for uniformity
The add_boolean_option of CMake is not uniform everywhere. We were using
either True/False or ON/OFF. It is better to be uniform to avoid
confusion.
As an example, see here CMake documentation for an example:
https://cmake.org/cmake/help/latest/module/CMakeDependentOption.html#example-basic-usage
There are also some minor spelling corrections.
Improve MAC docs for MCS and docker for BuildKit usage
See commits for details. The first one is for fixing an omission in
!3281, the second to clarify docker build usage.
Closes: #973
CI: speed up and simplify build, remove unnecessary Python code, remove --eNB* parameter list
This cleans up the CI framework for running end-to-end tests, and
improves the integration with OAI code. Specifically
- cleanup build_oai and helpers to output all text, which is captured
better by the CI
- build some images in the Cluster-Build in parallel to increase speed
- remove all --eNB{,1,2}{IPAddress,UserName,Password} variables. Those
were indexed through "instance" and "server ID" and are replaced with
the actual node name. I consider further cleanup to introduce a
"global" XML file node name so we don't need this in each step and
instead define this once.
- individual cleanup
Refactor ULSCH scheduler towards more TDD pattern flexibility
Refactors ULSCH scheduler, notably to support "UL-heavy" TDD patterns,
e.g., DSUUU. Also allows to run TDD pattern2 with UL slots, which was a
limitation in the previous code.
Previous commits removed min_grant_mcs and instead introduced
dl/ul_min_mcs as a more generic replacement.
Fixes: 96b0cae63e ("Drop 'min_grant_mcs' configuration parameter ")
Fixes: 699afafc6f ("Add support for 'dl_min_mcs' and 'ul_min_mcs'
configuration parameters")
Libboost went from 1.74.0 to 1.83.0 alongside Ubuntu update.
GCC version is set as default to be more practical.
In Ubuntu22, apt sources were in .list files, in Ubuntu24 they are in .sources files.
Add --break-system-packages for pip installation to use same logic as before, see the pip update 23.0.1 (2023-02-17).
With Ubuntu24 liboai_device requires libpython3.12
LDPC BBDEV/AAL rework
This branch aims to generalize the existing LDPC T2 implementation to support
other DPDK BBDEV accelerators, e.g., Intel ACC100/200.
Differences from the current T2 implementation include:
1. relax CMakeLists.txt checking for custom dpdk-t2 implementation,
technically, any DPDK BBDEV should work
2. BBDEV capability checks during init
3. llr_scaling to scale the input llr accordingly for better decoding
performance on the Intel ACC100/200
4. self-managed harq buffers for the ACC200, as internal harq memory is not
available
Tested BBDEV devices:
1. Intel ACC100
2. Intel ACC200/VRB1
Rename the library to reflect that it's more a generic AAL driver than
specifically for AAL. To this end, rename some documentation.
As of this commit, the options are still called nrLDPC_coding_t2. The
next commit will correct this.
Co-authored-by: Xin Zhe Khooi <khooixz@comp.nus.edu.sg>
Add a CU-UP load tester and improve GTP performance
This adds a simple tester program for the CU-UP. It sets up a number of
UEs/bearers in the CU-UP via the E1 interface, then streams data in
downlink/uplink (as seen by the CU-UP). More information is available in
tests/nr-cuup/README.md.
Includes some fixes to properly verify that SCTP is installed, and use
"the right cmake way" to use it in cmake code (see commit for details).
Remove these F1-C port numbers. The configuration is not actually
applied, and the default F1-C port number 38472 (see F1AP_PORT_NUMBER)
is hardcoded in the F1 module.
For the moment, I leave the configuration option, in case we want to
allow to configure the port numbers later).
This is a simple CU-UP load tester. It sets up a configurable number of UEs in the
CU-UP, then sends GTP traffic in downlink/uplink in the N3-F1/F1-N3
direction at the CU-UP. It then compares the sent and received data.
Additional parameters, such as amount of traffic, test length, packet
size, and IP addresses/ports are configurable.
To run:
mkdir build && cd build && cmake .. -GNinja && ninja nr-cuup nr-cuup-load-test params_libconfig
./tests/nr-cuup/nr-cuup-load-test
./nr-cuup -O ../tests/nr-cuup/load-test.conf
The tester should be able to detect lost and reordered packets.
Example lost: Receive order 2,3,5,6 (lost packet 4)
=> on packet 2, expected 2, next=expected+1=3
=> on packet 3, expected 3, next=expected+1=4
=> on packet 5, expected 4, diff=5-4=1 (lost 1), next=payload+1=6
=> on packet 6, expected 6
=> 1 lost
Example reordered: Receiver order 2,5,3,6 (lost packet 4)
=> on packet 2, expected 2, next=expected+1=3
=> on packet 5, expected 3, diff=5-3=2 (lost 2), next=payload+1=6
=> on packet 3, expected 6, (reduce lost by 1 to 1), next=expected=6
=> on packet 6, expected 6
=> 1 lost
Example reordered: Receiver order 2,5,3,4,6 (no losses)
Since the parent commit, the ra_ResponseWindow will be chosen
automatically. Correspondingly, remove most ra_ResponseWindow options
from configuration files in the repository.
One problem in some mu=1 configs is that the ra_ResponseWindow=4 (10
slots), which might be overly restrictive if the L1 slot ahead is
somewhat close to 10 (e.g., 6), in which case we might not be always
able to allocate Msg2 in time.
A notable exception here is gnb-vnf.sa.band66.u0.25prb.nfapi.conf, in
which we still provide it (1) since it uses a non-standard configuration
of a ra_ResponseWindow longer than 10ms (see also issue #916 for more
information) and (2) as an example.
Remove --usim-test command line option
Remove the --usim-test option: to my knowledge, it's not used by users,
and is misleadingly placed in various places where there should not be a
difference w.r.t. USIM configuration.
When making the changes, I assumed that --usim-test would be 0 (the
default), which is the case in all executables when not specified in
options except for the nr_dlsim, nr_pbchsmi, nr_ulsim simulators.
The only exception is the initialization of PDCP from the MAC, which
does not seem to be correct (the PDCP is in the CU, so it does not make
sense to call it from the MAC which is in the DU).
Synchronized Real-Time Data Recording Application Addition
The main Features of Synchronized Real-Time Data Recording Application:
- The Data Recording Application runs in parallel to the gNB or UE
server or in another server as Data Recording or Data Lake Server
- It makes use of (an extended version) of OAI’s T-tracer framework
- It communicates with base station, and user terminal
- It synchronizes and combines data traces and control information
(meta-data) from Base station and User terminal into consistent SigMF
data sets
Details on implementation addition:
- T_tracer Extension to Support up to 35 Parameters in the T() macro
- Add traces on gNB PHY UL and related requirement: FD PUSH IQ, FD DMRS, and UL Channel estimates wi/wo interpolation, and Rx Payload bits:
1. The required memories have been created and initialized in:
openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c
2. Those memories: memory for DMRS signals, memory for channel
estimates based on DMRS positions, memory to store slot grid with
channel coefficients based on DMRS positions after interpolation,
and memory to store extracted data including PUSCH + DMRS.
3. The input parameters to nr_pusch_channel_estimation() has been
updated to get the pointer to the added memories of
pusch_dmrs_slot_mem and pusch_ch_est_dmrs_pos_slot_mem
(openair1/PHY/NR_ESTIMATION/nr_ul_estimation.h)
4. The DMRS grid of NR slot and the estimated channel coefficients at
DMRS locations are logged to created memories in:
openair1/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c
5. The function inner_rx in
openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c is updated to log
the extracted ULSCH PRBs and the interpolated channel coefficients.
6. The T-macro() has been called in
(openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c) to trace added
traces: T_GNB_PHY_UL_FD_DMRS, T_GNB_PHY_UL_FD_CHAN_EST_DMRS_POS,
T_GNB_PHY_UL_FD_PUSCH_IQ, T_GNB_PHY_UL_FD_CHAN_EST_DMRS_INTERPL
- Add traces on UE PHY UL and related requirement: Tx Scrambled bits and Tx payload bits
1. Update input parameters to nr_ulsch_encoding () in
nr_transport_proto_ue.h to get number_dmrs_symbols to be added to
meta-data.
2. In nr_ulsch_coding.c: Trace UE PHY UL Payload TX bits (T_message:
T_UE_PHY_UL_PAYLOAD_TX_BITS) including related meta-data and UTC
time.
3. In nr_ulsch_ue.c: Trace UE PHY UL Scrambled TX bits (T_message:
T_UE_PHY_UL_SCRAMBLED_TX_BITS) including related meta-data and UTC
time.
4. Fix the input prameters in nr_ulsch_encoding () called in
(openair1/SIMULATION/NR_PHY/ulschsim.c) since a new input parameter
has been added.
- Add Data Collection Services (T-Tracers for gNB and UE)
1. Add _tracer_app_gnb and t_tracer_app_ue apps to common/utils/T/tracer/Makefile
2. Add Data collection Service for gNB: common/utils/T/tracer/t_tracer_app_gnb.c
3. Add Data Collection Service for UE: common/utils/T/tracer/t_tracer_app_ue.c
- Add Shared memory configuration
(common/utils/T/tracer/shared_memory_config.h), since we will have too
much memory consumption on the stack if the T-tracer is not fast
enough to process the traces or if we have too much traces. As a
result, tracers start to capture data, write data in shared memory,
then close the T-Tracer after getting the recording of N slots. The
Data recording App will read data from the shared memory.
- Add Main app of Data Recording Application v1.0 including: Config
files, SigMF Interface, Config Interface, Sync Service, and def
messages: The data recording App includes mainly the following files:
1. The main app: data_recording_app_v1.0.py that has the data control
service, interact with tracers, data sync and conversion service.
2. The configuration file:
common/utils/data_recording/config/config_data_recording.json
3. The wireless dictionary file:
common/utils/data_recording/config/wireless_link_parameter_map.yaml
4. Config Interface
(common/utils/data_recording/lib/config_interface.py) that reads
the configuration for both gNB and UE.
5. Sync interface (common/utils/data_recording/lib/sync_service.py)
that sync captured data for gNB and UE before saving them in SigMF
format
6. The SigMF Interface
(common/utils/data_recording/lib/sigmf_interface.py) to store
recorded data and meta-data in SigMF format
7. A simple script
(common/utils/data_recording/sync_validation_demo.py) to validate
that the recorded bits from gNB and UE are in Sync
- For more info look to doc/data_recording.md
Remove the --usim-test option: to my knowledge, it's not used by users,
and is misleadingly placed in various places where there should not be a
difference w.r.t. USIM configuration.
When making the changes, I assumed that --usim-test would be 0 (the
default), which is the case in all executables when not specified in
options except for the nr_dlsim, nr_pbchsmi, nr_ulsim simulators.
The only exception is the initialization of PDCP from the MAC, which is
not correct (the PDCP is in the CU, so it does not make sense to call it
from the MAC which is in the DU). Instead, always initialize from main,
even in the NSA case (NSA was covered by the incorrect initialization
from MAC).
This in turn let to some more cleanup around function du_rlc_data_req().
After receiving GTP packets at the DU, they were given to the PDCP to
enqueue the packet at RLC. This does not work anymore, since the PDCP is
not initialized; it also does not seem necessary, as this enqueue
functionality is necessary to decouple PDCP and RLC to avoid deadlocks
in monolithic, but in split-mode, this cannot happen. Instead, call
directly into the RLC when receiving GTP packets.
It provides and overview about the Architecture, Requirement Packages,
Configuration Files, How to run Data Recording Application, and an
Overview on Collected Data Set.
CI: Change RU in Aerial setup from Foxconn to WNC
- Change frequency in the gNB config file, from 3.75GHz to 3.5GHz
- Add high throughput tests with may_fail tag (1Gbps in DL and 90Mbps in UL)
- Update Aerial tutorial to match the changes
Measurement gaps
Scheduling measurement gaps to provide sufficient time for the UE to
re-tune its transceiver to the target carrier, complete the set of
measurements and then re-tune its transceiver back to the original
carrier.
Add WLS as a transport option for VNF/PNF, refactor existing options
This MR adds a new transport mechanism for the VNF and PNF split, using
the Intel WLS library, which makes use of DPDK and shared memory to
transport messages. This transport mechanism is what is used to
interface with Radisys ODU, while also working with OAI VNF/PNF.
The VNF and PNF have been refactored so that the transport-specific
functions are isolated from the rest of the logic, and as such,
interchangeable by means of function pointers.
The same change is done for the packing/unpacking procedures, allowing
to switch between FAPI and nFAPI encoding.
This MR also reduces the amount of duplicated code, by refactoring the
VNF with Aerial, which now only has the transport-relevant functions, as
well as the ones that are unique to it ( for example, the unpacking
procedures where a secondary data buffer is used for the message
payloads )
Additionally a new callback is added to the VNF to process
ERROR.indication messages, which currently only indicates which message
originated the error, and which error occurred.
Add a section in nfapi.md related to the different transport mechanisms available for VNF/PNF communication
Edit NR_NFAPI_archi.md to describe the VNF and PNF processing logic, as well as adding a flowchart for each of the components execution
Add the necessary patch to install the WLS library in the system
Calvin Peyron