Add support for O1 in O-DU via telnet
This change set adds a simple telnet interface to nr-softmodem. Together
with oai/o1-adapter>, this implements a part of the O1 interface, for
the DU only. Currently supported uses cases:
- some stats are send to an SMO (such as bandwidth, PLMN, frequency, ...)
- re-configuration of bandwidth, frequency
- stop/start of the softmodem, while keeping the CU and L2 running
- the o1-adapter implements two alarms, load overload and base station
offline, using this interface.
It is possible to use the telnet interface by itself (i.e., "o1" without
the o1-adapter). To do this, compile with telnet support (./build_oai
--build-lib telnetsrv) and start the nr-softmodem with O1 module
(./nr-softmodem --telnetsrv --telnetsrv.shrmod o1). You can then do the
following:
- see some statistics as exposed to o1-adapter, in JSON: echo o1 stats | nc 127.0.0.1 9090 && echo
- stop the L1: echo o1 stop_modem | nc 127.0.0.1 9090 && echo
- reconfigure bandwidth: e.g., echo o1 bwconfig 20 | nc 127.0.0.1 9090 && echo (also supported: 40, 60, 100)
- start the L1: echo o1 start_modem | nc 127.0.0.1 9090 && echo
Note that the reconfiguration works with split-8 radios. Notably, it
does not work yet out-of-the-box with 7.2 radios, because they have to
be manually reconfigured on bandwith/frequency switch. The planned
M-plane should allow such use case, though.
To help with the above, this branch also includes fixes (for more
information, refer to the corresponding commits):
- fixes for stopping the L1, notably stop threads in right order, stop
thread pool of RU
- collect some general MAC metrics, fix some bugs in MAC
- fix problems in F1AP gNB-DU configuration update message, update test
- fix some problems in RRC
This adds a basic telnet module to support the O1 interface at the DU,
to be used together with the oai/o1-adapter>. Concretely, this first
version supports to
- read/modify cell parameters
- stop/start the L1
A later commit implements the "restart" of the L1. The L1 reads
configuration options. First, allow to re-read configurations by
increasing the amount of memory the config module might allocate. Then,
avoid an out-of-bound write by checking that we still have memory
available (and assert if not possible).
remove un-necessary global variables
Remove global variables that can be removed by a trivial way:
- simply dead globals
- or reference is a single source, so can be static
setting them static reduces the scope, that is a progress, but of course as
for all static variables, the code is still not re-entrant
Align YAML config getlist with libconfig implementation
This aligns the behavior of params_yaml with params_config library:
- when a mapping is read using getlist it returns the number of elements in
the mapping instead of 0
- when a mapping is read using get it returns the number of parameters used
for input
T tracer: add macpdu traces for the NR UE
MIB, SIB1, random access and regular scheduling are traced.
At the beginning of a connection (rrc setup request and rrc setup), the
RNTI is reported as 0. Might be fixed, somehow, if absolutely needed (not
sure).
- removed some whitespace noise.
- cleaned up CMakeLists.txt
- reintegrated task_manager.c into thread-pool.c
- cleaned up some unnecessary code
Co-authored-by: Cedric Roux <cedric.roux@eurecom.fr>
Co-authored-by: Mikel Irazabal <mikel.irazabal@openairinterface.com>
MIB, SIB1, random access and regular scheduling are traced.
At the beginning of a connection (rrc setup request and rrc setup), the
RNTI is reported as 0. Might be fixed, somehow, if absolutely needed (not
sure).
This aligns the behavior of params_yaml with params_config library so that
when a mapping is read using getlist it returns the number of elements in
the mapping instead of 0.
Update NR UE threading model
This updates the NR UE threading model by preventing calling threadpool
from threadpool and fixes deadlock issues related to processSlotTX. By
making processSlotTX run to completion instead of starting and waiting
for other threads to finish it prevents locking thread pool cores,
therefore prevening deadlocks.
There is a slight difference here compared to the previous version where
I do not use the UL actor as I believe it is not necessary,
processSlotTX satisfies the run-to-completion requirement now. If in the
future any UL procedure would be parallelized using the thread pool it
should either be done in a run-to-completion model or the processSlotTX
function should be taken off the thread pool.
The documentation has been updated.
Implement run-to-completion for processSlotTX. This is achieved by using a new
dynamic_barrier_t which allows to specify callback after the first join has been
made.
This commit introduces dynamic_barrier_t. Its a thread barrier that counts joins
but allows callback to be specified later. See std::barrier for a basic barrier
description.
Refactor of includes in gNB/UE for improved header management
This merge request implements changes suggested by the Include What You Use
(IWYU) open source tool to streamline the project’s header file usage.
The adjustments ensure that each file includes only the necessary headers for
the symbols it uses, making the code more efficient and maintainable.
Unnecessary includes have been removed, and missing headers have been added
where required. This improves modularity and reduces inter-dependencies between
files, helping to avoid future build issues caused by unused or missing includes.
Each output has been manually reviewed.
Followed a similar approach as in !2953 (merged).
Affected folders/files:
- NR_MAC_gNB/main.c
- nr-softmodem.c
- unitary simulators: nr_dlsim, nr_ulsim, prachsim
- openair2/RRC/NR
- openair3/NGAP
- openair2/LAYER2/nr_pdcp
- openair2/SDAP/nr_sdap
This commit enables the optional use of Tracy for profiling NR UE & gNB.
See https://github.com/wolfpld/tracy/releases/tag/v0.11.1 for details.
How to compile:
use -DTRACY_ENABLE=ON to enable instrumentation and sampling
For gNB currently only sampling is implemented.
How to collect data:
- Windows hosts: tracy-profiler.exe in link above
- Linux hosts: Compile tracy-profiler from source
Enabling collection from docker:
- open port 8086
- to collect cpu data
--privileged
--mount "type=bind,source=/sys/kernel/debug,target=/sys/kernel/debug,readonly"
--user 0:0
--pid=host
How to add instrumentation:
- See examples in this commit or manual in the link above.
Added NTN FDD FR1 bands defined in 3GPP TS 38.101-5
Added support for NTN FDD FR1 bands 254, 255, 256 as specified in 3GPP
TS 38.101-5. Example Conf files added for band254 for 15Khz, 5Mhz and
30Khz, 10Mhz configurations. Tested NTN GEO configuration on band 254
using these conf files.
NR UE trigger for re-establishment
The implementation in this MR triggers RRC re-establishment at the UE in case
of radio link failure either for out of sync messages from lower layers or in
case maximum number of RLC retransmissions is reached.
Added support for NTN FDD FR1 bands 254, 255, 256 as specified in 3GPP TS 38.101-5
Conf files added for 15Khz, 5Mhz and 30Khz, 10Mhz configurations added for these bands
Set SA mode as default
- Set standalone (SA) mode as the default.
- Adjust commands in Docker Compose files by removing --sa flags and
adding --nsa flags where applicable.
- Add a function to verify that only one mode is being used at a time.
- Update all relevant documentation.
telnetsrv uses the Intel/AMD-specific "cpuid" instruction, which is not
available on ARM machines. Remove the call.
The previous code was checking for the number of cores, which is
retained by a call to get_nprocs(). I did not find an equivalent for the
number of threads in C. In C++, there would be
https://en.cppreference.com/w/cpp/thread/thread/hardware_concurrency, in
case it's relevant for anybody.
Update yaml-cpp dependency handling
- Added CPM fallback in case package is not found automatically.
- Using yaml-cpp::yaml-cpp target instead of yaml-cpp to silence
deprecation warnings on newer cmake versions.
- Added CPM fallback in case package is not found automatically.
- Using yaml-cpp::yaml-cpp target instead of yaml-cpp to silence deprecation
warnings on newer cmake versions.
Add F1 Handover procedures
- Clean up at RRC and MAC
- Add DU handover procedures, completely handle CellGroupConfig at DU
- Add CU handover procedures
- Maintain reestablishment working between/after handover
- Changes at UE to resync on different frequency DUs
Instructions: see doc/handover-tutorial.md
Things not implemented/open/missing: see #855
process registration reject in UE
when the 5GC rejects the ue, the message was not processed (information
element not declared)
this MR process it to print it and stop the UE
a more complete code should be done when the UE will be able to select
another cells than the most powerful PBCH, but it require larger
enhancement
Bartosz Podrygajlo