This commit refactors the SDAP entity QoS flow to DRB mapping functionality
to improve code organization and enhance maintainability.
Key changes:
- Split nr_sdap_qfi2drb_map_update into focused functions:
* nr_sdap_add_qos_flows_to_drb: handles QFI addition to DRB
* nr_sdap_rm_qos_flows_from_drb: handles QFI removal from DRB
* nr_sdap_ue_control_pdu_config: handles UE control PDU generation
- Consolidate add/modify logic into reusable nr_sdap_addmod_entity function
- Remove entity existence checking and updating from new_nr_sdap_entity:
this function should only add SDAP entities
- Improve function separation of concerns: do SDAP entity add or update
separately and improve modularity by splitting operations in self
contained functions
- At SDAP creation, do only add of QFI to DRB mapping
- rename new_nr_sdap_entity to nr_sdap_add_entity for function naming consinstency
* use get_sdap_Config to process sdap_Config
* move SDAP config logic to the scope where it is relevant
* add SDAP entity direcly in RRC, not from PDCP
* replaced nr_pdcp_add_drbs with single add_drb call: it was no longer
efficient to keep it in the new logic. The addMod list can be looped directly in RRC.
* add specific function to add bearers from addMod list in E1, NSA, and UE
CI: Upgrade HO setup to use an attenuator
The goal of this MR is to upgrade HO CI setup to include a digital attenuator
that will allow us to trigger handover by attenuating the signals on the DUs.
- Add band mismatch check in valid_du_in_neighbour_configs function
- Ensures neighbor cell band matches serving cell band
- Prevents invalid neighbor configurations for handover
OAI UE: add shared RSRP Table 10.1.6.1-1 mapping function to helpers and adopt
it RRC UE
- Add to common/utils/nr/nr_common remove from NR_MAC_UE/nr_ue_procedures.c
- Adopt in asn1_msg.c for MeasurementReport: this solves the following possible
assert:
Assertion (enc_rval.encoded > 0) failed!
In do_nrMeasurementReport_SA() /oai-ran/openair2/RRC/NR/MESSAGES/asn1_msg.c:898
ASN1 message encoding failed (MeasResultServMOList, 18446744073709551615)!
Motivation: unify RSRP-to-index mapping across layers and fix NR RRC
MeasurementReport encoding failures due to out-of-range values by reusing the
validated mapping.
Note: NR_RSRP-Range.c constraint: /* (0..127) */
Also refactored MeasurementReport to improve the code.
- Simplify do_nrMeasurementReport_SA API (encoder allocates local report)
- Adopt asn1cCalloc consistently
- Minor init cleanup for UL_DCCH message struct
- Add to common/utils/nr/nr_common remove from NR_MAC_UE/nr_ue_procedures.c
- Adopt in asn1_msg.c for MeasurementReport: this solves the following assert:
Assertion (enc_rval.encoded > 0) failed!
In do_nrMeasurementReport_SA() /oai-ran/openair2/RRC/NR/MESSAGES/asn1_msg.c:898
ASN1 message encoding failed (MeasResultServMOList, 18446744073709551615)!
Motivation: unify RSRP-to-index mapping across layers and fix NR RRC MeasurementReport
encoding failures due to out-of-range values by reusing the validated mapping.
Note NR_RSRP-Range.c constraint:
{ APC_CONSTRAINED, 7, 7, 0, 127 } /* (0..127) */
Remove NR L2 simulator code from UE
This MR removes NR (SA and NSA) L2 simulator from the codebase. The code, at
least at the UE side, was done at a time where there was no clear L2/L1 split
leading to a complex implementation that never worked as expected. The L2
simulator has been broken and removed from testing for long time and, once it
needs to be revived, it would require a complete new implementation.
Fix OAI UE memory leaks
Fix 1: Replaced asn1cFreeStruc with ASN_STRUCT_FREE in MAC layer to properly
free nested ASN.1 structures in cell group configuration.
Fix 2: Removed premature nullification of dedicatedNAS_Message->buf in
dlInformationTransfer processing to allow proper ASN.1 cleanup.
Fix 3: Fixed memory ownership in nr_rrc_process_dedicatedNAS_MessageList by
copying OCTET_STRING data instead of transferring ownership, preventing
ASN.1 cleanup from losing track of allocated memory
Closes#828
- Remove unnecessary NULL assignment for dedicatedNAS_Message->buf
- The original buffer is copied and transfered to NAS, so it can be properly freed by ASN.1 structure cleanup
Root cause: Code was nullifying dedicatedNAS_Message->buf pointer before ASN.1 cleanup could free the original allocation, causing the leak from OCTET_STRING_decode_uper.
AddressSanitizer leak trace (FIXED):
Direct leak of 119 byte(s) in 3 object(s) allocated from:
/#0 0x7ec2a42b4c38 in __interceptor_realloc
/#1 0x555fade852e0 in OCTET_STRING_decode_uper
/#9 0x555fadb48b11 in nr_rrc_ue_decode_dcch.
The leak was caused by improper memory ownership handling in the
dedicatedNAS_MessageList processing. The function was transferring
buffer ownership to NAS messages and then preventing ASN.1 cleanup
from freeing the original allocations by setting
list.count = 0, causing a memory leak.
Leak trace:
Direct leak of 40 byte(s) in 1 object(s) allocated from:
/#0 0x7f2ce3ab4a57 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
/#1 0x567907083f0f in OCTET_STRING_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/OCTET_STRING_uper.c:89
/#2 0x5679070ed5e6 in SET_OF_decode_uper /cmake_targets/ran_build/build/openair2/RRC/NR/MESSAGES/constr_SET_OF_uper.c:70
/#3 0x56790707b6dc in SEQUENCE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:118
/#4 0x56790707b6dc in SEQUENCE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:118
/#5 0x56790709a403 in CHOICE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE_uper.c:84
/#6 0x56790707b6dc in SEQUENCE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:118
/#7 0x56790709a403 in CHOICE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE_uper.c:84
/#8 0x56790709a403 in CHOICE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_CHOICE_uper.c:84
/#9 0x56790707b6dc in SEQUENCE_decode_uper /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:118
/#10 0x56790708b5f1 in uper_decode /cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/uper_decoder.c:83
/#11 0x567906d44b4b in nr_rrc_ue_decode_dcch /openair2/RRC/NR_UE/rrc_UE.c:2212
/#12 0x567906d520a3 in rrc_nrue /openair2/RRC/NR_UE/rrc_UE.c:2615
/#13 0x567906d5f77e in rrc_nrue_task /openair2/RRC/NR_UE/rrc_UE.c:2501
/#14 0x7f2ce2494ac2 in start_thread nptl/pthread_create.c:442
Fix:
- Copy OCTET_STRING data instead of transferring ownership
- Allow ASN.1 cleanup to properly free original allocations
This fixes the leak that occurred during rrcReconfiguration
message processing when dedicatedNAS_MessageList was present.
Closes#828
- Replace asn1cFreeStruc with ASN_STRUCT_FREE in MAC layer cleanup
- Fixes improper memory management of NR_CellGroupConfig structures
Root cause: asn1cFreeStruc only calls ASN_STRUCT_RESET + free(), which doesn't properly free nested ASN.1 allocations. ASN_STRUCT_FREE frees all nested structures completely.
AddressSanitizer leak trace:
Direct leak of 288 byte(s) in 1 object(s) allocated from:
/#0 0x7fb72bab4a57 in __interceptor_calloc
/#1 0x593752b28d0d in SEQUENCE_decode_uper
/#2 0x593752b9a546 in SET_OF_decode_uper
/#3 0x593752b2863c in SEQUENCE_decode_uper
/#4 0x593752b47363 in CHOICE_decode_uper
/#5 0x593752b2863c in SEQUENCE_decode_uper
/#6 0x593752b2863c in SEQUENCE_decode_uper
/#7 0x593752b2863c in SEQUENCE_decode_uper
/#8 0x593752b2863c in SEQUENCE_decode_uper
/#9 0x593752b2863c in SEQUENCE_decode_uper
/#10 0x593752b38551 in uper_decode
/#11 0x5937527d859f in nr_rrc_ue_process_masterCellGroup
/#12 0x5937527d9408 in nr_rrc_process_reconfiguration_v1530
/#13 0x5937527dd5bb in nr_rrc_ue_process_rrcReconfiguration
/#14 0x5937527f5e6b in nr_rrc_ue_decode_dcch
/#15 0x5937527ff003 in rrc_nrue
/#16 0x59375280c6de in rrc_nrue_task
Split monolithic e1_send_bearer_updates into three focused functions:
- e1_send_bearer_updates(): DRB setup from F1 UE Context Modification Response
- e1_request_pdcp_status(): Request PDCP status during inter-CU handover
- e1_notify_pdcp_status(): Notify CU-UP with PDCP status during handover
Extract common helpers:
- append_e1_drb_mod_req(): Common DRB-to-mod for bearer request logic
- e1_send_bearer_modification_request(): Common sending step
Bug fixes:
- Fix loop bounds (i < n instead of i == n)
- Fix array access bounds checking
- Fix DRB ID consistency
Memory management:
- Add missing free_e1ap_context_mod_request calls
- Improve error handling with early returns
In the process:
- Simplify cuup_notify_reestablishment with FOR_EACH_SEQ_ARR loop
- Adopted all callers to use new consolidated functions
Improves maintainability and eliminates complex conditional logic.
Replace field-by-field assignment with struct copy for plmn_identity.
Both source and destination use identical plmn_id_t type, making
this change safe and more maintainable.
- Reduces lines of code
- More readable and less error-prone
- Single memory copy operation instead of multiple field assignments
- Add missing handover context cleanup in rrc_CU_process_ue_context_release_complete
- Fix 16-byte handover context leak in N2 handover source gNB trigger path
AddressSanitizer backtrace:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
/#0 0x7fee67cb4a57 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
/#1 0x58059e33454b in calloc_or_fail /home/guido/repo/openairinterface5g/develop/common/utils/utils.h:74
/#2 0x58059e33454b in alloc_ho_ctx /home/guido/repo/openairinterface5g/develop/openair2/RRC/NR/rrc_gNB_mobility.c:47
/#3 0x58059e339e4d in nr_rrc_trigger_n2_ho /home/guido/repo/openairinterface5g/develop/openair2/RRC/NR/rrc_gNB_mobility.c:556
/#4 0x58059e33ae93 in nr_HO_N2_trigger_telnet /home/guido/repo/openairinterface5g/develop/openair2/RRC/NR/rrc_gNB_mobility.c:611
Root cause: Handover context allocated in N2 handover source gNB trigger path (nr_rrc_trigger_n2_ho)
for any successful N2 handover but not properly freed in all handover completion scenarios.
The UE context release complete handler was missing cleanup for handover context.
Solution: refactor handover context cleanup
- Move nr_rrc_finalize_ho() call to rrc_delete_ue_data() for centralized cleanup
- Remove redundant nr_rrc_finalize_ho() calls from handover failure paths:
* rrc_CU_process_ue_context_release_request() - UE not deleted yet
* invalidate_du_connections() - UE will be deleted later
- Keep nr_rrc_finalize_ho() calls in handover success paths where UE continues operating
- Ensures handover context is cleaned up exactly once when UE is actually deleted
- Prevents potential double-free and use-after-free issues in handover cleanup
This centralizes all UE data cleanup in rrc_delete_ue_data() and ensures
handover context is properly managed throughout the UE lifecycle and cleaned up
when UE delete happens.
- Replace heap allocation with stack allocation for seq_arr_t structures
- Use proper seq_arr_free() with free functions for ASN.1 structures
- Remove unnecessary malloc/free calls for sequence containers
- Improve memory safety and performance with automatic cleanup
Fixes 128-byte memory leak:
Direct leak of 128 byte(s) in 2 object(s) allocated from:
/#0 0x7e7f39ab4a57 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
/#1 0x56df8b07312d in SEQUENCE_decode_uper /home/guido/repo/openairinterface5g/develop/cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/constr_SEQUENCE_uper.c:37
/#2 0x56df8b056551 in uper_decode /home/guido/repo/openairinterface5g/develop/cmake_targets/ran_build/build/openair2/RRC/LTE/MESSAGES/uper_decoder.c:83
/#3 0x56df8a896b1b in get_nr_mtc /home/guido/repo/openairinterface5g/develop/openair2/LAYER2/NR_MAC_gNB/nr_radio_config.c:4216
/#4 0x56df8a82feb8 in ue_context_setup_request /home/guido/repo/openairinterface5g/develop/openair2/LAYER2/NR_MAC_gNB/mac_rrc_dl_handler.c:635
/#5 0x56df8a66a298 in nr_initiate_handover /home/guido/repo/openairinterface5g/develop/openair2/RRC/NR/rrc_gNB_mobility.c:218
/#6 0x56df8a6720af in nr_rrc_trigger_n2_ho_target /home/guido/repo/openairinterface5g/develop/openair2/RRC/NR/rrc_gNB_mobility.c:526
/#7 0x56df8a5cf338 in rrc_gNB_process_e1_bearer_context_setup_resp /home/guido/repo/openairinterface5g/develop/openair2/RRC/NR/rrc_gNB.c:2633
/#8 0x56df8a5d28ab in rrc_gnb_task /home/guido/repo/openairinterface5g/develop/openair2/RRC/NR/rrc_gNB.c:3012
/#9 0x7e7f38494ac2 in start_thread nptl/pthread_create.c:442
- Add early check for existing UE context by AMF UE NGAP ID at beginning of rrc_gNB_process_Handover_Request
- Add dedicated function to get UE context by AMF UE NGAP ID: rrc_gNB_get_ue_context_by_amf_ue_ngap_id()
- Send handover failure with appropriate cause if UE context already exists
- Remove redundant ho_context NULL check that could never be true for newly created UE contexts
- Prevents duplicate handover processing and resource leaks
Add check for cu_exists_f1_ue_data() before calling cu_get_f1_ue_data()
to prevent assertion failure when telnet command 'ci fetch_du_by_ue_id'
is used for UEs that have been handed over via N2 (and no longer have
F1 UE data).
This fixes the crash:
Assertion (ret == HASH_TABLE_OK && data != ((void *)0)) failed!
In get_hashtable_data() /oai-ran/openair2/F1AP/f1ap_ids.c:36
element for ue_id 1 not found
The function now returns NULL gracefully when F1 UE data is not available.
Co-authored-by: Guido Casati <hello@guidocasati.com>
- Add proper cleanup of allocated ASN.1 structures in all return paths
- Fix early returns that were leaking NR_HandoverPreparationInformation
- Fix early returns that were leaking NR_RRCReconfiguration
- Add cleanup at end of successful function execution
This prevents memory leaks when processing handover preparation information
during N2 handover procedures.
- Add UE context cleanup before sending handover failure message
- Prevents memory/resource leak when PDU session establishment fails during handover
- UE context was created but never cleaned up on failure path
This fixes a bug where UE contexts would accumulate over time
when handovers failed after context creation.
- Fixed incorrect log messages that said 'PCI=%lu' when printing nr_cell_id
- Now prints both NR Cell ID and PCI when DU is found
- Provides better debugging information for handover requests
Improvements to RRC PDU session and DRB handling logic
This merge request introduces a major simplification and cleanup of the gNB RRC
PDU Sessions and DRBs handling logic. The core goals of this work are to:
- Replace fixed-size PDU Session, DRBs and QoS arrays with dynamic containers
- Simplify and modularize helper functions for session/DRB management
- Prepare for further refactoring of the PDU Session state machine
- Improve code safety and maintainability through better bounds checking
- Replace simple counter-based DRB ID assignment with actual DRB ID lookup
- Add nested loop to iterate through DRBs for each PDU session to be release
- Improve logic flow with early continue for non-matching PDU sessions
This ensures DRB release list contains correct DRB IDs that correspond to actual DRB entities
* There is no IE corresponding to PDU sessions failed to release
in the PDU SESSION RESOURCE RELEASE RESPONSE message. This was removed
and the corresponding code was refactored and cleaned up.
* In the Release Command handler, only established PDU Session are set to be
released. The Response message is filled accordingly.
Motivation:
The previous architecture had several issues:
- Duplicate DRB generation logic in generateDRB() and generateDRB_ASN1()
- Embedded SDAP/PDCP configs in drb_t created tight coupling
- No clear separation between RRC internal state and ASN.1 encoding
- Maintenance burden due to duplicated configuration logic
New Architecture:
- drb_t now only stores DRB-specific data (ID, PDU session ID, PDCP config)
- SDAP configuration moved to PDU session level (following PDCP design pattern)
- ASN.1 encoding helpers (nr_rrc_build_*_config_ie()) handle conversion
- Single source of truth for DRB creation in RRC via nr_rrc_add_drb()
Key changes:
- Store nr_sdap_configuration_t per PDU session
- Simplified drb_t structure: removed embedded SDAP/PDCP configs, added pdusession_id
- New helper: nr_rrc_build_sdap_config_ie()
- Updated createDRBlist() to use new helper functions and proper DRB ID lookup
- Refactored trigger_bearer_setup() to use nr_rrc_add_drb() and fill_e1_drb_to_setup()
- Removed generateDRB() and generateDRB_ASN1() functions
- Updated set_bearer_context_pdcp_config() to return config by value
- Added SDAP configuration header file for type definitions
This eliminates code duplication, improves maintainability, and creates
a cleaner separation between RRC state management and ASN.1 encoding.
- Move QoS-related enums and structures from ngap_messages_types.h to 5g_platform_types.h
- Replace ngap_* QoS types with generic qos_* types for better reusability
- Update field names from allocation_retention_priority to arp for consistency
- Update all references across RRC and NGAP modules to use new type names
- Remove duplicate QoS type definitions from NGAP-specific header
This improves code organization by centralizing QoS parameter definitions
in a common platform types header and eliminates NGAP-specific naming
in favor of more generic, reusable type definitions.
The maximum number of QoS flows is 64.
- Replace QOSFLOW_MAX_VALUE with MAX_QOS_FLOWS constant
- Move MAX_QOS_FLOWS definition to common/platform_constants.h
- Remove duplicate QOSFLOW_MAX_VALUE definition from ngap_messages_types.h
This improves maintainability by centralizing the QoS flow limit constant
and eliminates duplicate definitions across different header files.
- Limit scope of get_default_rbconfig function: from asn1_msg.c/.h to rrc_gNB_nsa.c where it's used
- Create new rrc_gNB_asn1.c/h files for ASN.1 utility functions: they can be used in other RRC files
- Add nr_rrc_build_pdcp_config_ie function for building PDCP configuration IEs
- Update get_default_rbconfig to use the new PDCP config builder
- Add rrc_gNB_asn1.c to CMakeLists.txt build configuration
The previous DRB management relied on a fixed-size array (established_drbs[MAX_DRBS_PER_UE])
and manual status tracking using DRB_ACTIVE/INACTIVE flags. This approach was inefficient,
and made assumptions about DRB ID allocation that do not generalize well
to dynamic procedures like bearer modification or removal.
* Replace fixed-size array established_drbs[] with dynamic
seq_arr_t *drbs in gNB_RRC_UE_t
* Refactor get_drb() and added nr_rrc_add_drb() with clean abstractions
using find and seq_arr lib
* Updated all DRB-related logic (e.g., generateDRB,
F1AP/E1AP tunnel config, reestablishment, mobility) to use seq_arr.
* Removed status field and DRB_ACTIVE/INACTIVE logic: list presence implies active
* DRB ID allocation now tracked via seq_arr size : simplifies DRB management and
avoids DRB ID–indexed assumptions: code assumed DRB IDs mapped directly to
array indices: established_drbs[drb_id - 1]. This could break when:
DRB IDs are not sequential, DRBs are removed and re-added, or there are gaps in IDs
The RRC PDU Session struct is converted from a fixed-size array
to a dynamically sized seq_arr. This improves flexibility and
simplifies session management by eliminating arbitrary size limits
and enabling dynamic addition/removal of PDU sessions.
Helper functions and loops have been adapted to use the seq_arr API.
This change is a step toward more robust and maintainable handling
of PDU sessions in the gNB RRC layer.
The "status" state machine remains untouched in this commit and
is refactored in a later commit.
Also:
* add macro to push to seq_arr and return the new element
* move initialization of xid (RRC PDU Session struct) to
find_pduSession (temporary, will be finalized in a later
commit) since with the new seq_arr design the initialization
is no longer possible in the UE context generation (also
does not belong to it, initialize when adding a new PDU Session)
- Process all PDU sessions in handover request instead of only the first one
- Add DevAssert for bounds checking on nb_of_pdusessions
- Fix logic error where multiple PDU sessions were ignored in handover scenarios
Previously, the RRC layer was incorrectly allocating stack memory for the ho_required_transfer field and passing it to NGAP, however it was not used. The IE is mandatory but contains only 1 optional IE, therefore is encoded in the NG message with empty content.
Changes:
- Remove unnecessary ho_required_transfer field from pdusession_resource_t definition, the IE is encoded anyway with empty content. If Direct Forwarding Path Availability is needed at any stage in the future it can be added to pdusession_resource_t and filled in RRC.
- Add clarifying comment about empty HandoverRequiredTransfer structure
Guido Casati