Add support for O1 in O-DU via telnet
This change set adds a simple telnet interface to nr-softmodem. Together
with oai/o1-adapter>, this implements a part of the O1 interface, for
the DU only. Currently supported uses cases:
- some stats are send to an SMO (such as bandwidth, PLMN, frequency, ...)
- re-configuration of bandwidth, frequency
- stop/start of the softmodem, while keeping the CU and L2 running
- the o1-adapter implements two alarms, load overload and base station
offline, using this interface.
It is possible to use the telnet interface by itself (i.e., "o1" without
the o1-adapter). To do this, compile with telnet support (./build_oai
--build-lib telnetsrv) and start the nr-softmodem with O1 module
(./nr-softmodem --telnetsrv --telnetsrv.shrmod o1). You can then do the
following:
- see some statistics as exposed to o1-adapter, in JSON: echo o1 stats | nc 127.0.0.1 9090 && echo
- stop the L1: echo o1 stop_modem | nc 127.0.0.1 9090 && echo
- reconfigure bandwidth: e.g., echo o1 bwconfig 20 | nc 127.0.0.1 9090 && echo (also supported: 40, 60, 100)
- start the L1: echo o1 start_modem | nc 127.0.0.1 9090 && echo
Note that the reconfiguration works with split-8 radios. Notably, it
does not work yet out-of-the-box with 7.2 radios, because they have to
be manually reconfigured on bandwith/frequency switch. The planned
M-plane should allow such use case, though.
To help with the above, this branch also includes fixes (for more
information, refer to the corresponding commits):
- fixes for stopping the L1, notably stop threads in right order, stop
thread pool of RU
- collect some general MAC metrics, fix some bugs in MAC
- fix problems in F1AP gNB-DU configuration update message, update test
- fix some problems in RRC
These are the "main" worker threads (apart the ru_thread). If the
thread-pool stops, they might get stuck. E.g., in PUSCH channel
estimation, it uses a local response queue, and if the thread pool is
terminated, it seems that the L1_rx_thread can get stuck in there.
To limit these problems, attempt to stop these threads first; stop the
queue from which they read and make them terminate; then, stop the
thread pool.
Also, fix the termination of respPuschSymb queue.
* the goal of this function is to initialize and configure the RAN Context
* the goal of get_options is to get command line options
* this commit aims at making the implementation more consistent
* move initialization of RC.nb_nr_CC to this function
* cleanup redundant initializations of RC.nb_nr_macrlc_inst outside NRRCConfig
* cleanup redundant initization of RC.nb_nr_macrlc_inst from getter function (get_node_type)
* cleanup RC initialization in RCconfig_NR_L1
* removed redundant log lines (print number of instances in NRRCConfig only)
* do RC init after getting CL options and configuration
* get_node_type shall access configuration only, not RC context
* NRRCConfig shall be called only once: made it thread-safe
* nb_nr_inst represents the number of gNB instances and the number of RAN contexts
* it used also to count the number of RRC instances in the node
* it is set from config file in NRRCConfig, therefore redundant checks after
this function have been removed
* redundant global variable NB_gNB_INST, set after nb_nr_inst, was removed
This commit removes many logs that just show memory addresses, indices,
etc., which, I presume, do not mean anything to the "average user" and
developers alike.
The absslot_tx overflow issue observed during integration testing of AW2S
RU with GPS as the source for the clock synchronization. Causes the gNB
not to start the TX thread and stops the processing.
PUSCH decoding is started multiple times in nr_ulsch_procedures() for
each ULSCH segment, and stopped once inside
phy_procedures_gNB_uespec_RX(). Not only is it not clear if that works
with the API, it also might measure more than just PUSCH decoding.
Remove the PUSCH decoding, it is misleading. Check L1 RX processing
instead.
This commit introduces a separate thread (l1_tx_thread) that processes
gNB DL/TX slots. It receives a message from the ru_thread when a new
slot started, and starts processing.
The DL part of the scheduler is run in the l1_tx_thread. Therefore,
only call UL indication (for scheduler) in UL slots. The UL indication
previously triggered the DL scheduler -- hence, it had to be called in
every slot. Now, since the DL scheduler is moved into the DL thread, we
don't have to call the scheduler in every slot anymore.
The reorder thread is removed, as reordering with this scheme is not
necessary anymore.
The main advantage of this version is that the TX can be scheduled
earlier (sl_ahead). Further, there can no longer be race conditions in
the TX path, since the scheduler/L2, TX L1 processing and the RU tx
function are all execute in the same thread (L1_tX_thread).
Also, the scheduler prepares PRACH/PUSCH/PUCCH FAPI PDUs. As of this
commit, the scheduler runs in the TX processing chain, whereas these
PDUs are destined for RX processing. Thus, too avoid data races,
instead of triggering the RX processing at the same time as TX
processing in the RU thread, this commit changes the code to trigger RX
processing after the scheduler has been run in TX processing to avoid
data races.
Finally, we synchronize RU and L1 threads. This is important for
rfsimulator, since unlike most radios, rfsimulator can run slower or
faster, depending on I/O and CPU (it does not have a stable "tick").
Co-authored-by: kiran <saikiran@iitj.ac.in>
The UL_INFO_mutex is used in only one place, and therefore useless.
Also, the scheduler uses a lock internally to prevent concurrent access.
Hence, the UL_INFO_mutex is not needed.
Remove kill_gNB_proc(), as it is now dead code.
The next commit introduces a separate gNB TX processing thread. To
properly separate DL scheduler (for scheduling decisions) from UL
indication handling (for UL packets), this commit introduces a slot
indication "tick" to run the DL scheduler which will be put into the gNB
TX processing chain instead of the UL indication.
Reformat code to properly copy memory if we skip precoding.
precoding_stats timing is not part of ru->feptx_ofdm, but
ru->feptx_prec, so always print it.
Previously, in order to speed up processing if precoding is disabled, we
just copy the pointer from txdataF to txdataF_BF, as opposed to do a
full memcpy() to duplicate the data. The same happens if we cannot have
precoding, i.e., in SISO. This has implications such as memory leaks,
which is why this is not being done. However, the code comment is
intentionally placed there.
For 7.2 FH, some RUs do phase compensation, whereas for others, the DU
does it. In fact, this can be "negotiated" using the M plane. Since we
don't have the M plane yet, add a configuration option to set where
phase compensation is performed.
- avoid the finction duplication
- add the transform predoding to the nr_rx_pusch_tp
- add the MMSE for 2 layer which modulation greater than 16 qam
- can support to 256 qam for 1 layer and 2 layer
1. Adding a "SL" frequency for Sidelink mode. The
importance of this variable is to ensure that
when we are in mode 1 (UE+UE+gNB), that the slot
configuration and frequencies do not overlap. This
SL frequency is important for rotation and allows
us to utilize the OFDM modulation and demodulation
functions that already exist in OAI.
2. Adding sl_mode to the command line for proper UE
deployment when in SL mode. sl_mode can be set to 0,
1, or 2. sl_mode 0 indicates no-Sidelink at all,
mode 1 is gNB, UE, and UE (3GPP defines mode numbers).
sl_mode 2 indicated UE to UE communications with no
gNB at all.
3. New functions for calculating the carrier frequency
for SL mode.
reorder_thread_disable we use the native message queue and L1_rx_thread instead of the thread-pool for the main L1 thread. There is a single TX thread (no slot parallelization)
Robert Schmidt