Signal gNB-DU config update CellStatus from DU to CU
Add the cell status to gNB-DU configuration update message, including
test. Use the gNB-DU configuration update to signal the cell status in
the stack.
This IE was not included in a previous refactoring round, but is at
least necessary to be decoded when interoperating with the OSC O-DU.
Improvements in handling UE context in gNB DU
The goal of this MR is to improve the handling of UE context in gNB DU.
To achieve this goal, the UE structure is created as soon as the gNB
receive a PRACH indication. At that stage the UE is placed in a new
structure containing UEs performing RA, untill RA is complete where it
is moved to the list of connected UEs. To simplify the code and to
improve the handling of initial procedures (see #751), DCI 10 and DCI 00
is used at every stage until the DU receives from CU the indication of
UE RRC reconfiguration being completed.
Remove assert for SRI-PUSCH-PowerControl
SRI-PUSCH-PowerControl is not implemented at this point but its enough
to warn about incorrect power control behavior rather than assert on the
configuration.
Closes#953
This is preparatory work to allow NSA-like modes to be used over F1 in
the future. Notably, it fills the F1 message for UE context setup with
GTP TEID, and fills additional information to "make the F1 encoder
happy" (fill in QFI etc). Also, provide some F1 fixes to make this work.
Remove stale UE connections, if relevant.
sdap_tun_read_thread needs to know if we are gNB/UE. Previously, we
passed this into the thread, but the next commit also needs to for
interface termination, where this info is not available. So, for noS1
mode, pass this in.
Add functionality to trigger the addition of a new RRC UE context (in
the CU) for NSA modes, using F1. This commit makes do-ra and phy-test
modes work. "True" NSA will work in the next commit, which also sends
the X2 addition request answer message.
Use the gNB-DU configuration update to signal the cell status in the
stack. At the DU, modify the code to always send this message --
previously, we only sent this message if a SIB1 update was necessary,
but now it's always, only including SIB1 updates if necessary.
At the CU, as we don't really have a use as of now, print the
information, but don't do anything with it.
- rewrite add_UE_to_list() and rewrite remove_UE_from_list() to simplify
list handling
- return pointer from get_new_nr_ue_inst(); it's completely freed by
delete_nr_ue_data()
- have add_new_UE_RA() add UE context to access list; remove with
nr_release_ra_UE()
- have add_connected_nr_ue() only add UE to connected list; to move from
access to connected use transition_ra_connected_nr_ue(); remove with
mac_remove_nr_ue() as previously
- free memory on problems during RA
- add some documentation
- in NSA/HO: check for pre-configured RA process
- there are asserts in all functions to clarify when a UE has RA
SRI-PUSCH-PowerControl is not implemented at this point but its enough
to warn about incorrect power control behavior rather than assert on the
configuration.
This commit does not introduce the callback on the CU-UP to trigger
a Bearer Context Setup Failure when the setup of the bearer context was unsuccessful.
This should be handled properly in the stack e.g. in e1_bearer_context_setup (a comment
in the code says "We assume all DRBs to setup have been setup successfully, so we always
send successful outcome in response and no failed DRBs")
Fix for NR UE DLSCH decoding barrier in case of no feedback
In !3291 NTN CI RFsim test fails with the UE being stuck. After some
investigation, this seems to be caused by the scenario where there is no
feedback for DLSCH. In that case there is no need to wait for DLSCH
being completed before generating feedback (there is no feedback).
Fix ASN1 struct double free
When paging, RA and other SI have same PDCCH search space, we should
free the struct once and reset the other pointers to NULL.
Improve radio for Metanoia RU (and likely others)
We introduced a regression that lowered the achievable DL throughput
with at least the Metanoia RU (i.e., in the configuration and the UE
that we use). git bisect showed up one commit, which does not seem
necessary. We just revert this commit, as it improves the throughput and
does not seem to have a negative impact on performance.
Further, increase RLC buffers a bit. Limit 7.2 pipeline number of layers
to 2.
The UE stores PDCCH search spaces from the network in NR_BWP_PDCCH_t
struct within NR_UE_MAC_INST_t. After storing, the pointers otherSI_SS,
ra_SS and paging_SS are updated to point to the stored SS. Multiple
pointers could point to the same stored SS struct depending on
configuration. Then when the UE wants to release the SS, the pointers
are used to free the stored SS using ASN_STRUCT_RESET(). If multiple
pointers point to the same SS, calling ASN_STRUCT_RESET() on all
pointers would lead to double free. So one needs to check for dangling
pointer before freeing.
Instead of using pointers and assigning them during configuration, we
use SS id for otherSI_SS, ra_SS and paging_SS to retrieve the pointers
whenever needed. When the UE wants to release the SS, we make them -1
indicating an invalid SS id.
Add Bearer Context Modification Request/Response enc/dec lib and adopt in stack
This MR is introducing the Bearer Context Modification Response enc/dec
library with relative unit test, and it is also adopting it in the
stack. Also:
- Refactor Security Information IE decoding function
- Adopt Bearer Context Modification Request lib in stack (introduced in
!3219 (merged))
Issue 947 and compilation improvements
This MR started with a small commit (03c7f151) to close#947. Little did
I know that I would be taken in a long journey through OAI compilation
hell.
F1AP: Allocate gNB_DU_ID before storing ID
Update the test so it would catch that bug. Check in eq_() that both
gNB_DU_IDs would be present, or not, using xor.
Found while interop testing with OSC DU.
francescomani