Integration: `2024.w23`
See merge request oai/openairinterface5g!2788
* !2510 NR UE MAC UCI on PUSCH and aperiodic CSI reporting
* !2597 LTTng logger (CTF)
* !2751 synch the USRP time accross devices using the host clock
* !2775 Remove some global variables
* !2779 remove rb_mask_ul from permanent storage for stack local usage
* !2782 USRP: add a T trace to record the RX IQ data on antenna 0
* !2783 build_oai: fix bad options' names
* !2753 Pucch power control
* IP address of VNF shall be aerial1's one
* scripts within cubb container shall be run with sudo now
Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>
In some testcases, especially when iperf test duration is short (10s),
client does not report on time and report collection is interrupted.
This commit increase timeout for iperf/iperf3 commands.
Avoid UBSan error:
openair1/PHY/NR_ESTIMATION/nr_measurements_gNB.c:183:22: runtime error: signed integer overflow: 2122747784 + 27403601 cannot be represented in type 'int'
avoid UBsan error:
openair1/PHY/NR_TRANSPORT/pucch_rx.c:266:21: runtime error: signed integer overflow: 2113190528 + 117251752 cannot be represented in type 'int'
avoid UBsan error:
openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c:459:77: runtime error: signed integer overflo w: 2009540296 + 668087372 cannot be represented in type 'int'
xran's xran_bm_init() uses rte_pktmbuf_pool_create() to allocate DPDK
buffers. For a 1x1 configuration, the number of buffers might be too
small, and rte_pktmbuf_pool_create() might fail. This commit ensures
that we increase the number of buffers to have enough even in a 1x1
configuration. This works by chosing the next power of two, which is
recommended as per DPDK documentation.
Closes-Bug: #750
Neighbor configuration can be given by gNB.conf
get_MeasConfig function is extended as it will prepare A2 / A3 Report
Configs. Single Meas Obj is used for all.
rrc_gNB_process_MeasurementReport function is extended to process A2 /
A3 measurement events. helper functions are written to fetch neighbour
cell informations from sequence containers.
(get_neighbour_cell_information, get_neighbour_config)
- neighbour_config.conf file includes neighbour and measurement related parameters
Neighbour List:
- nr_cellid: the identity of existing cell who has neighbour
- neighbour_cell_configuration(list): includes the identity parameters
of the neighbour cell such:
- gNBID (incase of N2 Handover / to be identified from AMF)
- nr_cell_id (target gNB needs to consider)
- physical_cellId (needed for measurement reporting)
- absoluteFrequencySSB (needed for measurement reporting)
- subcarrierSpacing (needed for measurement reporting)
- plmn / tracking area code (incase of N2 Handover / needed for AMF
to identify / allow HO)
NR Measurement Configuration
- Periodical
- enable (default is 0, 1 enables the reporting)
- includeBeamMeasurements, maxNrOfRS_IndexesToReport (configurable
reporting parameters)
- A2
- enable (default is 0, 1 enables the reporting)
- threshold , timeToTrigger (configurable reporting parameters)
- A3
- cell_id (the nr_cellid of neighbour cell. So this A3 parameters
will be used for the neighbour
- [-1] means default. so it can be applied to any neighbour if
there is no specific config
- Neighbour specific A3 Threshold can be used or default can be
selected depending to the neighbour planning
- The neighbour-config.conf specifies, apply default A3 for
neighbours 3 and 4 | apply specific one for neighbour 2
- offset, hysteresis, timeToTrigger (configurable reporting parameters)
the neighbour_config.conf can be included in the gNB.conf file. Example
is given: gnb.sa.band78.106prb.rfsim.neighbour.conf
A sequence array container is used for neighbour cell configuration. RRC
structure has this container. A Measurement configuration structure is
defined. This structure has Periodical / A2 Event structures and also a
sequence container for A3 Event List.
These structures are filled during the initialization. While F1 Setup
Response is coming from DU to CU, the intra frequency / inter frequency
neighbour decision is given for the existing cell. Also new neighbours
could be added here if needed.
Raphael Defosseux