RETURN_IF_INVALID_ASSOC_ID() checks if an assoc_id (of a DU) is valid.
It will be also used in the mobility RRC module later. Move it to the DU
header (where it logically belongs) to move it from there.
Prior to this commit, after RA failure, the DU would send a UE context
release complete, without actually requesting one. This could lead to
inconsistent state between DU and CU, because the CU might just discard
this (unrequested) message, and not actually trigger a release [1].
Thus, refactor the release request into a function, and use it to
request release of a UE for which RA has not been completed. If the CU
does not know the UE, release the UE immediately.
[1] One possibility would be that during reestablishment, the CU would
request to look up an old DU UE ID when it has been released, resulting
in
Assertion (oldUE) failed!
In dl_rrc_message_transfer() /home/oaicicd/robert/openairinterface5g/openair2/LAYER2/NR_MAC_gNB/mac_rrc_dl_handler.c:860
CU claims we should know UE bc7f, but we don't
In handover, we might need to remove a UE that we knew under it's
C-RNTI, for which we also have the RA process. Hence, when removing a UE
by RNTI, remove it also from RA.
* DL NAS Transport messages can piggy-back 5GSM messages
* the relevant decoding functions can be called in the handler (e.g. capture_pdu_session_establishment_accept_msg)
* the capture_pdu_session_establishment_accept_msg function is already handling
the code in the case FGS_PDU_SESSION_ESTABLISHMENT_ACC of NAS_DOWNLINK_DATA_IND
Closes: #841
Bugfix in ue pusch mac pdu creation
When more than one sdu with equal priority is present, there could be
buffer left after serving the lcids and also not enough to equally serve
all lcids. This commit checks for this condition. Before this fix the ue
would send malformed mac pdus when serving multiple lcids.
See getopt(3): returns int, so store it in an int variable.
I went through all occurrences, project-wide. All return values of
getopt() should be stored in ints now.
process registration reject in UE
when the 5GC rejects the ue, the message was not processed (information
element not declared)
this MR process it to print it and stop the UE
a more complete code should be done when the UE will be able to select
another cells than the most powerful PBCH, but it require larger
enhancement
CI: Update RAN-gNB-N300-Timing-Phytest-LDPC test cases
- update enc/decoder tests in RAN-gNB-N300-Timing-Phytest-LDPC - test
only for given SNR value (check of the test results to be added in the
following MR)
- add cores to Tpool in the nr_dlsim test cases, currently we test with
only one core
- always execute all the nr_ulsim/nr_dlsim tests, even if one of them
fails
- add new nr_dlsim test cases - test with 4 antennas, 2 layers
Refactor file descriptor handling in rfsimulator
- add hashtable iterator to hashtable.c
- use hashtable for file descriptor to buffer_t mapping in rfsimulator
This enables the use of file descriptors above 250. The linux file
descriptors can reach the value of FD_SETSIZE which could be e.g. 1024.
This is not an issue in most cases but if the UE or gNB process opens a
lot of file descriptors for other purposes we might see rfsimulator file
descriptors reach > 250 and cause a segfault.
Also added tests for new hashtable functions.
Instead of hardcoding to 0, instruct the GTP module to send N3 GTP
packets with the right GTP.
We currently only support one QoS Flow, so check that it is really only
one.
When more than one sdu with equal priority is present, there could be
buffer left after serving the lcids and also not enough for equaly
serving all lcids. This commit checks for this condition. Before this
fix the ue would send malformed mac pdus when serving multiple lcids.
After RA, in the case of HO, we need to make sure to use the right radio
configuration (MCS table, etc). This commit is important to make HO
actually work.
Our initial CellGroupConfig always contains LCID1, because in normal
connection setup, the DU has to automatically set it up anyway. In
handover/UE Context Setup, the CU requests to set up SRB1 (which we
assume to be LCID1), but we reuse the initial CellGroupConfig. To not
have SRB1 added twice, skip in this case.
This commit implements adding a new UE on the target DU in case of
handover. We identify this case by the fact that the gNB-CU did not send
a gNB-DU UE ID (which is optional in F1AP, but not in our
implementation), such that we know there is no corresponding UE, which
therefore has to be created.
If it happens that there is a handover preparation information, we read
the UE capabilities from this information, and subsequently trigger the
creation of a new UE.
Another change is that for all bearers that we are asked to setup, we
add reestablishRLC so that the UE does a reestablishment during the
reconfiguration.
As we have to remove the reconfigurationWithSync and reestablishRLC IE
after application of the CellGroupConfig (because we might reuse the
CellGroupConfig later), free these IEs. As there are now multiple fields
to free, introduce a separate nr_mac_clean_cellgroup() function that
handles cleaning of the CellGroupConfig.
Co-authored-by: batuhanduyuler <batuhan.duyuler@firecell.io>
Co-authored-by: rmagueta <rmagueta@allbesmart.pt>
The next commit will modify the UE context setup request procedure to
(possibly) receive UE capabilities through Handover Preparation
Information, which extracts the UE capabilities for the UE to be setup.
To avoid code duplication, extract the code that will be needed in UE
capability extraction from Handover Preparation Information.
Implement the Transmission Action Indicator F1AP forwarding logic, and
add it to the F1 internal representation structure. After the
transmission interrupt timer (during which SRB1 can send messages), the
UE will be out-of-sync (we assume it's not there anymore).
Co-authored-by: batuhanduyuler <batuhan.duyuler@firecell.io>
Co-authored-by: rmagueta <rmagueta@allbesmart.pt>
Implement the HandoverPreparationInformation F1AP forwarding logic, and
add it to the F1 internal representation structure.
No logic is implemented in this commit.
Co-authored-by: batuhanduyuler <batuhan.duyuler@firecell.io>
Co-authored-by: rmagueta <rmagueta@allbesmart.pt>
Refactor the RRC processing timer to be a generic "transmission
interrupt" timer, and use NR_timer_t for it. Also,
depending on the kind of RRC processing (see 38.331 table 12.1-1),
timing requirements might be different. However, the DU does not always
know which RRC processing is ongoing, and does not get this information
via F1. Hence, introduce a "worst case" delay time, which aligns with
the spec (it says these times are "minima") and is accepted by COTS UE.
The gNB MAC might need to stop transmission either for some time (RRC
processing), or continuously (transmission stop requested by CU). Those
can be handled in one common timer implementation. The continuous case
will be used in a follow-up commit.
Co-authored-by: Luis Pereira <lpereira@allbesmart.pt>
Robert Schmidt