As parent. The second change has no escape sequence, but since it's also
a regex, mark it as raw for uniformity (it doesn't hurt either).
ci-scripts/cls_module.py:165: SyntaxWarning: invalid escape sequence '\.'
result = re.search('inet (?P<ip>[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)', output.stdout)
With the server object to be passed into ping test, it's not necessary
to either hardcode an IP address or provide a template. Instead, always
fill the IP address, which simplies the Ping() code.
Verify that we don't have an IP address/hardcoded by throwing an
assertion.
38.413 section 8.2.1.4 says that if PDU session resource setup req
contains an existing PDU session, that one should be reported as failed.
That is rather complicated for us to do; simply reject all PDU sessions
and let the core deal with that.
If two PDU sessions are to be setup, the CU-CP sends two bearer context
setup requests. When running only the CU-UP, we inconditionally tried to
set up the CU-UP UE ID identifiers upon reception of the bearer context
setup request, leading to an assert. Check if the IDs are not already
set up, to avoid assertions in that case.
The REPORT service was hardcoded to only style 4, and therefore not easily extendable.
This commit moves the support for style 4 in a separate function.
Delete duplicated enum structs for RAN Parameter IDs for all the REPORT styles.
They are already defined in "openair2/E2AP/flexric/src/sm/rc_sm/ie/rc_data_ie.h".
Co-authored-by: Tano Bischoff <tano.bischoff@hhi.fraunhofer.de>
Co-authored-by: Khanh Toan Pham <khanh.toan.pham@hhi.fraunhofer.de>
Co-authored-by: Shrinish Donde <shrinish.donde@hhi.fraunhofer.de>
Co-authored-by: Miguel Fuentes <miguel.fuentes@i2cat.net>
Co-authored-by: Teodora Vladic <teodora.vladic@openairinterface.org>
Update the xran E release patch to work for Arm targets in addition to x86 targets.
Co-authored-by: Yi-Hung Chang <Yi-Hung.Chang@eurecom.fr>
Co-authored-by: brobert <brobert@valiha.com>
Remove include of SIMDE Neon header sse_intrinsic.h to compile on ARM. Otherwise the error below is issued.
```
/usr/include/simde/arm/neon/get_lane.h:279:5: error: incompatible type for argument 1 of ‘vget_lane_f16’
279 | SIMDE_CONSTIFY_8_(vget_lane_f16, r, (HEDLEY_UNREACHABLE(), SIMDE_FLOAT16_VALUE(0.0)), lane, v);
removed the inclusion of neon.h
```
Currently we still activated the DL HARQ process for PUCCH transmission,
and only at the time of the scheduled PUCCH transmission, we actually skip sending the ACK.
This is not only unnecessary, it is at least misleading and strange that
DL HARQ processes can be reused in the meantime, even though they are active...
Therefore simply don't activate the DL HARQ process by skipping the call to set_harq_status() if feedback for it is disabled.
Integration: `2025.w13`
Closes#923, #924, #928, and #925
See merge request oai/openairinterface5g!3345
* !3300 Allow RSRP report handling in phy-test mode
* !3318 Improve handling of some pointers causing potential segfault
* !3321 DLSCH scheduler LOGs assertion prevention in case of HARQ disabled
* !3335 Other compilation improvements
* !3338 prevent access to NULL pointer in RELEASE_IE_FROMLIST
* !3337 Fix for wrong NSA init at UE
* !3339 fix NTN regression by correctly setting cellBarredNTN_r17 for NTN band again
* !3340 NR UE: fix nr_pbch_channel_estimation()
* !3260 Shared memory realtime radio simulation
* !3341 rfsimulator: apply deadlock detection only if more than one client is connected
* !3343 K-offset updated with configured sub carrier spacing
* !3331 Add documentation for Foxconn RU
* !3216 FHI72: Management plane support
* !3295 Fix SRS report TLV unpack
Fix SRS report TLV unpack
Changes the SRS unpacking to not expect padding to be present in the buffer when
working with Aerial, with which the report TLVs are not padded to the nearest
32-bit boundary. This issue was found when using a UE with 1 SRS port, which
causes the TLV to not have a length divisible by 4. Also adds a function to pull
X amount of bytes into a uint32_t, which is used to process the last 4 byte
block of the TLV, only pulling the bytes which are not padding. Completed the
SRS.indication dumping procedure to print out the report TLV. Changed the
SRS.indication unitary test to fill the last 4 byte block of the report TLV
appropriately according to the length ( which ensures the padding bytes are set
to 0 )
This is not really used as of now, because most IPs are hardcoded. See
one of the next commits for the use of this.
To make sure that we have the correct IP, there is some code that
verifies that a hardcoded IP and the CN IP would be the same.
Note: need two separate ci_infra.yaml entries, because
- for FlexRIC, the container name is different (is the tutorial CN)
- for RFsim5G E1, we don't have ext-dn => ping UPF
- call scripts for magma MME-based deployment of OAI 5GC in
ci_infra.yaml
- implement the existing python code through scripts (which does the same)
- save the cql file in the repo, which was previously downloaded every
time
- use for porcepix-cn4g and nano-cn4g (un)deployment, ping, perf, in XML
files
- Use scripts to deploy OpenShift-based 5GC in ci_infra.yaml
- Use for oc-cn5g, oc-cn5g-20897, and oc-cn5g-20897-aerial2
for (un)deployment, ping, iperf in relevant XML files
- Convert hardcoded IP addresses to %cn_ip%
Use the core network class to configure one "end" of these tests. This
will make the tests more generic and predictable, as they are explicitly
configured through two ci_infra.yaml "entities", instead of some
implicit "EPC" IP address given in configuration.
As of this commit, no XML passes this info into the framework, so no XML
step will work. As it is many changes, the following commits will add
the necessary info one by one.
Robert Schmidt