-- pipeline is polling the develop-nr branch
-- new conf file / new scenario files
-- main python now supports LTE and 5G-NR executables in a Ubuntu/CentOS env
* Instead of partly initializing in read_config_and_init(), everything of
PDCP is initialized in main() of lte-softmodem
* Omit RC.rrc access in RRU through checking of RC.nb_inst > 0
* Includes FlexRAN, i.e. do not start FlexRAN in RRU
* Function pointers to PDCP functions have to be set explicitly (avoid
confusion of multiply setting function pointers)
Not much major changes. In openair1/PHY/LTE_UE_TRANSPORT/dci_tools_ue.c,
in the function generate_ue_dlsch_params_from_dci,
'harq_pid' was removed and dci_info_extarcted.harq_pid is now used for
all cases.
The ue T tracer only deals with PHY signals (no MAC, RLC, PDCP, RRC).
end_of_burst_delay is used to stop TX only "after a while".
If we stop right after effective signal, with USRP B210 and
B200mini, we observe a high EVM on the S subframe (on the
PSS).
A value of 400 (for 30.72MHz) solves this issue. This is
the default.
This default value can be changed in the configuration file.
For example:
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 20
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 105;
eNB_instances = [0];
sf_extension = 312;
end_of_burst_delay = 200;
}
);
Here we would set a value of 200.
The value to put in the configuration file is for
30.72MHz. The value is scaled accordingly at runtime
(thus only one value to set for every RB configuration,
25, 50 or 100, leading to less problems when adapting
configuration files).
This option is for experts and should not be changed
randomly.
Start of burst is to start TDD DL transmission in the driver
(tested with USRP for the moment).
End of burst is to stop DL transmission.
Start of burst can only happen for a DL subframe when the
previous subframe was an UL subframe.
End of burst can only happen for an S subframe.
It's impossible for a subframe to be both the start of a burst
and the end of a burst.
This can be checked with eg. http://niviuk.free.fr/lte_resource_grid.html
(or reading the specs).
This parameter is meaningful in TDD, to decide
when to start DL at eNB side. Since there is a
need for the PA to be operational, we need to
transmit a bit before the DL subframe coming
after an UL subframe. (We transmit zeros.)
We used to use N_TA_offset which may be too much.
Default value is now N_TA_offset/2 and can be
changed in the configuration file, in the RUs
section, like:
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 105;
eNB_instances = [0];
sf_extension = 312;
}
);
N_TA_offset is 624 (for 30.72MHz). In the example
above, we set sf_extension = 312, which is also
the default.
The value to put in the configuration file is for
30.72MHz. The value is scaled accordingly at runtime
(thus only one value to set for every RB configuration,
25, 50 or 100, leading to less problems when adapting
configuration files).
This option is for experts and should not be changed
randomly.
This commit introduces X2AP timers (t_reloc_prep, tx2_reloc_overall).
You need to set the values in the configuration file.
X2AP can be enabled or disabled in the configuration file too (disabled
by default).
Some deadcode was removed.
yilmazt