Unify SIB container handling by introducing a typed SIB enum and storing
SIB payloads as byte_array_t across common NR types, F1AP helpers, MAC,
and RRC DU setup code.
Changes:
- Include byte_array support in nr_common.h, add nr_sib_type_t (NR_SIB_1–NR_SIB_21),
and change nr_SIBs_t to hold only nr_sib_type_t SIB_type.
- Switch f1ap_sib_msg_t in f1ap_messages_types.h to use a byte_array_t SI_container
instead of raw pointer and length fields.
- Update F1AP encode/decode, equality, copy, and free helpers in
f1ap_interface_management.c to work on SI_container.buf / SI_container.len and
use eq_byte_array, copy_byte_array, and free_byte_array.
- Adapt F1AP tests in f1ap_lib_test.c to build and inspect SIB containers via
SI_container.buf and SI_container.len.
- Replace magic SIB numbers with nr_sib_type_t values in gnb_config.c
(get_sys_info and fill_du_sibs) to validate and configure DU SIBs.
- Rework nr_mac_configure_other_sib in NR_MAC_gNB/config.c to decode SIB2
from a byte_array_t container, fix freeing by releasing the decoded sib2 on
failure, and use NR_SIB_2 / NR_SIB_19 for CU/DU SIB selection.
- Add an add_si_msg helper in rrc_gNB_du.c and refactor the SIB2 branch of
rrc_gNB_process_f1_setup_req to populate cell->SI_msg from encoded local
byte array while iterating SIBs with FOR_EACH_SEQ_ARR.
Tighten neighbour-cell config parsing by enforcing parameter constraints in
the descriptor and switching parsing code to name-based lookups with gpd.
Changes:
- Update `GNBNEIGHBOURCELLPARAMS_DESC` in `openair2/GNB_APP/gnb_paramdef.h`
to add checks for `physical id`, `absoluteFrequencySSB`, `scs`, `band`
`tracking_area_code`.
- Remove neighbour-cell parameter index macros.
- Refactor `parse_neighbour_cells_list` in `openair2/GNB_APP/gnb_config.c`
to use `gpd()` lookups for neighbour fields instead of fixed indexes.
- Extend `parse_neighbour_cells_list` with an `n_cell_params` argument and
update `fill_neighbour_cell_configuration` to pass
`sizeofArray(ncell_params)`.
Inline neighbour cell arrays into the RRC neighbour configuration and
update RRC/DU helpers to use const-aware access and shared iteration
helpers when walking neighbour lists and building measurement configs.
Changes:
- Change neighbour_cells in neighbour_cell_configuration_t from a
seq_arr_t * to an embedded seq_arr_t field.
- Initialize and populate the embedded neighbour_cells directly in
parse_neighbour_cells_list in gnb_config.c, dropping dynamic
allocation of the neighbour list container.
- Refactor get_neighbour_cell_by_pci and nr_rrc_get_measconfig in
rrc_gNB.c to access the embedded neighbour_cells via const pointers,
introduce a local meas_cfg and a3_event_list, and iterate neighbour
cells with FOR_EACH_SEQ_ARR.
- Treat neighbour cell configuration entries as const in rrc_gNB_du.c
(get_cell_neighbour_list, label_intra_frequency_neighbours,
valid_du_in_neighbour_configs) and iterate neighbour lists with
FOR_EACH_SEQ_ARR instead of index-based loops.
Outer gNB neighbour_list entries now only declare the serving cell
nr_cellid. The code resolves that field with gpd instead of a fixed column
index.
Changes:
- gnb_paramdef.h: remove unused NEIGHBOUR_CELL_PHYSICAL_ID from
GNB_NEIGHBOUR_LIST_PARAM_LIST (keep NRCELLID only).
- gnb_config.c: in fill_neighbour_cell_configuration, set nr_cell_id
from gpd
Refactor gNB configuration code to share PLMN extraction logic and to
split neighbour-cell configuration into smaller helpers with safer
allocation and clearer list handling.
Changes:
- Add `extract_plmn_from_params()` in `gnb_config_common.c` and declare
it in `gnb_config_common.h` to centralize PLMN extraction from
`paramdef_t`.
- Update `set_plmn_config()` to use `extract_plmn_from_params()` when
filling the PLMN array instead of duplicating field assignments.
- Refactor `fill_neighbour_cell_configuration()` in `gnb_config.c` to
delegate per-cell neighbour parsing to
`parse_neighbour_cells_list()` and sorting to
`sort_neighbour_configuration()`, simplifying the main loop.
- Use `extract_plmn_from_params()` when parsing neighbour PLMNs in
`parse_neighbour_cells_list()` and log each neighbour with its PLMN,
PCI, and other radio parameters before adding it to the sequence.
- Switch allocation of `rrc->neighbour_cell_configuration` in
`fill_neighbour_cell_configuration()` from `malloc` to
`malloc_or_fail()` to enforce consistent handling of allocation
failures.
Thread-pool support for TX symbol processing.
This MR adds thread-pool support for TX symbol processing. It allows modulation
/mapping/layer-precoding to run in parallel and offers a speedup of around 3
compared to single-thread execution. This is particularly important for large
bandwidths and 4 or more TX antenna ports where the precoding operation is quite
computationally-intensive.
Please see the description of !3489 for the performance comparison results and
the nr_dlsim timing measurements.
* Add option `--L1s.L1_num_tx_sym_per_thread` for the softmodems and `-Y` for `nr_dlsim`
to provide the number of symbols processed per thread.
It defaults to 0 which makes that every symbols are processed in one thread.
* The last symbol processing task is processed in the L1 TX thread.
Further unused arguments cleanup
More fixes for unused function arguments (see #1057),
add_compile_options(-Wunused-parameter) added in folders:
- nfapi
- openair2
- openair3
- USRP
- rfsimulator
Cleanup common_lib.h
This change reduces the number of dependecies of common_lib.h and simplifies
the task of implementing an external OAI radio library.
Remove the gNB_MAC_INST.eth_params_s, since it's only purpose is to
store what can be on the stack.
For the Aerial log message, don't print an empty prefix but what is
actually used for Aerial.
The indices are brittle and might be wrong. Instead, use the option name
(via gpd()) to look up config options. This will also simplify the
removal of unused parameters, as we don't have to update all indices.
Remove leading CONFIG_STRING_, as it is just repetitive and adds noise.
The constants are both short(er) and sufficiently self-explanatory
without it.
- all RAN code, CI code, configuration files, dockerfiles, in CSSL v1.0
- all deployment code (openshift, charts, ancillary files like shell
scripts), in MIT
- documentation in CC-BY-4.0
- exceptions might apply and are listed in NOTICE
- there is a new LICENSES folder with all licenses
- CONTRIBUTIONS.md has been updated accordingly
For automated changes based on OAI PL v1.1:
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.{c,h,cpp}
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.ts
perl -i~ -0pe 's/<!--.*Licensed to the OpenAirInterface.*openairinterface.org\n.*-->/<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->/s' **/*.xml
The rest (cmake, files with missing license, cmake) manually.
Remove the \file directive, as it is always superfluous because the
current file is implicit [1]:
> If the file name is omitted (i.e. the line after \file is left blank)
> then the documentation block that contains the \file command will belong
> to the file it is located in.
Author names and e-mails are not relevant for us: it can always be
inferred from git blame, and is often outdated.
Eurecom code has been contributed and was under OAI PL v1.0/v1.1.
For the cpack package contact: put generic email address that is
independent of an individual and that will remain reachable.
[1] https://www.doxygen.nl/manual/commands.html#cmdfile
Fix Delta MCS mode, reimplement UL power control
This change set fixes the "delta-MCS" mode, and reimplements the UL power
control loops at gNB, i.e., for PUSCH and PUCCH. It further adds new T traces
to log PUSCH/PUCCH power infrmation, and cleans up code.
The "delta-MCS" mode in OAI refers to configuring a UE with deltaMCS in the
PUSCH-PowerControl IE (see TS 38.331). In this mode, the UE adjusts the PUSCH
power for transmissions to take into account for MCS (see TS 38.213 Sec. 7.1).
In other words, the target SNR can be set to a somewhat low value, and the UE
will still use the right power for UL transmissions. Note that the spec only
foresees this adjustment of UL power when using one layer. In contrast, in the
"normal" mode, the gNB sends TPC commands to keep a UE at a fixed target SNR
(default: 20dB), regardless of the MCS or number of layers. Future work is
planned to completely remove this fixed target SNR, which is not done in this
MR yet.
Further, there is a new power control loop implementation. Prior to this MR, on
each UL transmissions, the gNB uses the SNR to decide about TPC sent to a UE in
the next transmissions. The new implementation relies on averaging the SNR, and
a "TPC in flight" average to account for the slow reaction of the average SNR.
The sum of both quantities is the current SNR that is used by the UE. See the
commit messages or documentation for more information.
Further cleanup to group data (e.g., power control configuration, refactoring of
code to save space, ...) is done. Two new T traces GNB_MAC_PUSCH_POWER_CONTROL
and GNB_MAC_PUCCH_POWER_CONTROL are added; documentation exists to explain how
to graphically plot corresponding graphs.
Configure DigitalBeamTable in OAI and pass down to Aerial L1
With this MR it will be possible to define a Beamtable in OAI and pass it down
to a L1 (Aerial or OAI) which then will either use them locally to apply
static beamforming (Split 8 with USRP) or pass them down to the RU using 7.2
split with Section Extension 1.
Remove unused function arguments
Some of them, because there are hundreds if not thousands. Warnings at compilation time can be enabled using -Wunused-parameter.
Cleanup Cmake: remove some double compilation
Harmonize some cmake code to avoid double compilation, notably around
polar and smallblock. In develop, we just add their sources to other
targets, whereas now we define STATIC libraries (further changed to
shared library in !3856) to avoid double compilation.
With this command line:
cmake .. -GNinja -DENABLE_TESTS=ON && ninja
shows that before we compile 12631 files, where after it is 12583
there is additional supporting cleanup (move code, remove headers,
types, ...).
there is more harmonization to do, I limited myself to some easy wins.
For instance, we do the same with PDCP/SDAP, and this should be
refactored into STATIC libraries as well.
RRC: Multi-cell handling architecture
This MR implements a foundational multi-cell handling architecture for
RRC by separating DU management from cell management and establishing a
hierarchical cell organization within each DU container. The changes
enable proper multi-cell support where each DU can serve multiple cells,
addressing the previous limitation where DU and cell management were
tightly coupled with the assumption of one cell per DU.
Key Changes:
- Data Structure Separation: Separated for DU containers (DU-specific
info) from cell containers (cell-specific data)
- Global DU and Cell Trees: Cells are now stored in global RB trees in
RRC, similarly to DUs
- Du-specific cell seq_arr: within each DU container (du->cells) is
stored a seq_arr of cells belonging to the DU
- UE Cell Association Framework: Introduced serving_cells array to track
PCell and SCells for each UE with servCellIndex indexing
- Cell Management Library: Extracted cell management functions into
rrc_cell_management.c/h for better testability and maintainability
Other relevant changes:
- F1AP Refactoring: cell list definitions, heap allocation to prevent
stack overflow
- 5G-S-TMSI Helpers: Common helper functions for 3GPP TS 23.003
compliant construction
- Integration Tests: Comprehensive test suite for DU lookup, cell
lookup, and UE cell association
- Cell Duplication Checks: Validation in F1 DU configuration update to
prevent duplicate cells
- Documentation: Updated RRC developer documentation with multi-cell
architecture details
Validated with RFsim in re-establishment and handover scenarios.
openair2/COMMON/rrc_messages_types.h has mostly 4G types. The only 5G
(gNB) RRC type is gNB_RrcConfigurationReq, which we can move to a header
in the corresponding directory (where it is used).
This allows to separate 5G gNB RRC module from the 4G types in
rrc_messages_types.h in the next commit.
- Change gNB RRC enable_sdap default to true
- Update RRC and RUNMODEM docs to reflect new default behavior
- Clean up CI gNB configs by removing redundant enable_sdap=1
- Keep explicit SDAP disable config for NFAPI gNB VNF
- Delete drbs field from gNB_RrcConfigurationReq and its use in RCconfig_NRRRC()
- Remove GNB_CONFIG_STRING_DRBS, help text, index, and GNBPARAMS_CHECK entry from gnb_paramdef.h
- Drop DU-side verification and DRB count logging in gnb_config.c
This commit adds documentation comments and logging to improve
code readability and debugging capabilities for the multi-cell
architecture.
Changes:
- gnb_config.c: Add logging when configuring DU with cell ID and PCI
- rrc_gNB_du.c: Add documentation comment for ssb_arfcn_mtc()
- rrc_gNB_du.c: Add documentation comment for dump_du_info()
Finalize the migration from single-cell-per-DU to the multi-cell
architecture: remove legacy DU/cell fields and refactor RRC procedures
to use cell containers and UE serving cells instead of DU-based lookups.
Data structure changes:
- Remove nr_cellid from gNB_RRC_UE_t; cell identity comes from the UE's
serving_cells (PCell entry via ue_get_pcell_entry(ue)). UE_LOG_ARGS
and LOG_UE_* macros take a PCell entry pointer for null-safe cell_id
in logs; all call sites pass ue_get_pcell_entry(ue).
- Remove setup_req, mib, sib1, mtc from nr_rrc_du_container_t (held in
cell containers); remove nr_cellid from gNB_RRC_INST and its
assignment in gnb_config.c.
Function and signature updates:
- get_ssb_arfcn(): take cell container instead of DU.
- label_intra_frequency_neighbours(): drop du parameter, use cell only.
- Handover: Handover context (source and target) now stores cell
pointers (source->cell, target->cell) instead of DU pointers. When
the context is created (N2: on Handover Request; F1: in
nr_rrc_trigger_f1_ho), the target cell is set in ho_context->target->cell
and, for F1, the source cell in ho_context->source->cell.
nr_initiate_handover() takes only source_cell and reads the target
from ho_ctx->target->cell, so it no longer takes a target parameter.
The target is known at handover creation time, while the UE’s
serving_cells are only updated after F1 UE Context Setup Response.
- nr_rrc_trigger_f1_ho() and the N2 handover path pass cell pointers
and set ho_context->target->cell (and for F1, source->cell) when
the handover is triggered.
Procedure refactoring:
- Lookups: replace get_du_by_cell_id() with get_cell_by_cell_id()/
get_cell_by_pci(); remove get_du_by_cell_id() and
get_cell_information_by_phycellId().
Rationale: cell-specific data (MIB, SIB1, mtc, info) now lives in
cell containers, and a DU can host multiple cells. Callers need the
cell (to use cell->info, cell->mtc, etc.), not the DU. Looking up
by cell_id therefore returns the cell container
(get_cell_by_cell_id()); when the DU is needed, use
cell->assoc_id and get_du_by_assoc_id(). Looking up by PCI is
scoped (e.g. get_cell_by_pci_for_du() for a given DU, or via the
UE’s serving cells) because PCI is not globally unique.
- Setup/Reestablishment: resolve cell, register as PCell via
rrc_add_ue_serving_cell(); reestablishment resolves cell by PCI
(rrc_get_cell_by_pci_for_du), then rrc_remove_ue_scells_from_du +
rrc_add_ue_serving_cell; validate_ue_cell_association() after update.
- Measurement config: use cell->info (SCS/band) and cell->mtc.
- Handover: use cell containers end-to-end; after UE context
modification response call nr_rrc_update_cell_assoc_after_ho().
- NGAP: cell_id and TAC from UE PCell via rrc_get_pcell_for_ue();
Handover Notify: get cell for message content, use get_du_for_ue() for
DU existence check; paging resolves UE by 5G-S-TMSI-Part1 and uses that
UE's PCell (rrc_get_pcell_for_ue) for F1AP_PAGING_IND nr_cellid.
Performance and robustness:
- Use rrc_get_pcell_for_ue() when cell data is needed; use
get_du_for_ue() when only the DU is needed (F1/N2 HO trigger,
Handover Notify DU check) for efficiency.
- Reestablishment: remove old PCell before adding new; error handling
for PCell add and validation.
Code cleanup:
- F1 setup: stop copying/storing setup request in DU container; F1
disconnect only frees cell containers via rrc_free_cell_container().
- dump_du_info(): iterate du->cells and show all cells per DU.
- telnetsrv_ci.c: use du->gNB_DU_id directly and fix format (%ld).
- UeContextSetupRequest servCellIndex set to RRC_PCELL_INDEX; remove
servCellIndex from F1AP UE context modification request.
Neighbour lists are built per serving cell in fill_neighbour_cell_configuration.
Each neighbour in a list is identified by PCI; having two entries with the same
PCI in one cell's list would be ambiguous and indicate a configuration error.
This commit adds validation so that duplicate PCIs within a cell's neighbour
list are detected at configuration load time and cause a fatal assertion with
a clear error message.
Changes:
- Add eq_neighbour_pci() and get_neighbour_by_pci() using
common/utils/alg/find.h to look up a neighbour by PCI in a seq_arr.
- In fill_neighbour_cell_configuration(), before appending each
cell's neighbour list, iterate over neighbours and assert that no PCI
appears more than once
* Commit applies to Setup Request, CU/DU Configuration Update
* Set standard compliant max number of cells per DU
* Allocate large lists on the heap to prevent stack overflow
due to the large size
* Update relevant free functions
* Also, fix bug in eq_f1ap_cu_configuration_update
Also, improve comments in struct definition.
NR gNB handling TCI state indication for beam switching
This MR implements the procedure to send in DLSCH MAC-CE for TCI state
indication to UE
- if new beam is reported via SSB RSRP, gNB allocates MAC-CE with TCI
indication
- DLSCH is scheduled to be transmitted with priority
- a timer is started when receiving ACK according to the delay mandated
by standard (8.10.3 of 38.133)
- at timer expiry the gNB switches beam
Guido Casati