process registration reject in UE
when the 5GC rejects the ue, the message was not processed (information
element not declared)
this MR process it to print it and stop the UE
a more complete code should be done when the UE will be able to select
another cells than the most powerful PBCH, but it require larger
enhancement
CI: Update RAN-gNB-N300-Timing-Phytest-LDPC test cases
- update enc/decoder tests in RAN-gNB-N300-Timing-Phytest-LDPC - test
only for given SNR value (check of the test results to be added in the
following MR)
- add cores to Tpool in the nr_dlsim test cases, currently we test with
only one core
- always execute all the nr_ulsim/nr_dlsim tests, even if one of them
fails
- add new nr_dlsim test cases - test with 4 antennas, 2 layers
Refactor file descriptor handling in rfsimulator
- add hashtable iterator to hashtable.c
- use hashtable for file descriptor to buffer_t mapping in rfsimulator
This enables the use of file descriptors above 250. The linux file
descriptors can reach the value of FD_SETSIZE which could be e.g. 1024.
This is not an issue in most cases but if the UE or gNB process opens a
lot of file descriptors for other purposes we might see rfsimulator file
descriptors reach > 250 and cause a segfault.
Also added tests for new hashtable functions.
Instead of hardcoding to 0, instruct the GTP module to send N3 GTP
packets with the right GTP.
We currently only support one QoS Flow, so check that it is really only
one.
When more than one sdu with equal priority is present, there could be
buffer left after serving the lcids and also not enough for equaly
serving all lcids. This commit checks for this condition. Before this
fix the ue would send malformed mac pdus when serving multiple lcids.
After RA, in the case of HO, we need to make sure to use the right radio
configuration (MCS table, etc). This commit is important to make HO
actually work.
Our initial CellGroupConfig always contains LCID1, because in normal
connection setup, the DU has to automatically set it up anyway. In
handover/UE Context Setup, the CU requests to set up SRB1 (which we
assume to be LCID1), but we reuse the initial CellGroupConfig. To not
have SRB1 added twice, skip in this case.
This commit implements adding a new UE on the target DU in case of
handover. We identify this case by the fact that the gNB-CU did not send
a gNB-DU UE ID (which is optional in F1AP, but not in our
implementation), such that we know there is no corresponding UE, which
therefore has to be created.
If it happens that there is a handover preparation information, we read
the UE capabilities from this information, and subsequently trigger the
creation of a new UE.
Another change is that for all bearers that we are asked to setup, we
add reestablishRLC so that the UE does a reestablishment during the
reconfiguration.
As we have to remove the reconfigurationWithSync and reestablishRLC IE
after application of the CellGroupConfig (because we might reuse the
CellGroupConfig later), free these IEs. As there are now multiple fields
to free, introduce a separate nr_mac_clean_cellgroup() function that
handles cleaning of the CellGroupConfig.
Co-authored-by: batuhanduyuler <batuhan.duyuler@firecell.io>
Co-authored-by: rmagueta <rmagueta@allbesmart.pt>
The next commit will modify the UE context setup request procedure to
(possibly) receive UE capabilities through Handover Preparation
Information, which extracts the UE capabilities for the UE to be setup.
To avoid code duplication, extract the code that will be needed in UE
capability extraction from Handover Preparation Information.
Implement the Transmission Action Indicator F1AP forwarding logic, and
add it to the F1 internal representation structure. After the
transmission interrupt timer (during which SRB1 can send messages), the
UE will be out-of-sync (we assume it's not there anymore).
Co-authored-by: batuhanduyuler <batuhan.duyuler@firecell.io>
Co-authored-by: rmagueta <rmagueta@allbesmart.pt>
Implement the HandoverPreparationInformation F1AP forwarding logic, and
add it to the F1 internal representation structure.
No logic is implemented in this commit.
Co-authored-by: batuhanduyuler <batuhan.duyuler@firecell.io>
Co-authored-by: rmagueta <rmagueta@allbesmart.pt>
Refactor the RRC processing timer to be a generic "transmission
interrupt" timer, and use NR_timer_t for it. Also,
depending on the kind of RRC processing (see 38.331 table 12.1-1),
timing requirements might be different. However, the DU does not always
know which RRC processing is ongoing, and does not get this information
via F1. Hence, introduce a "worst case" delay time, which aligns with
the spec (it says these times are "minima") and is accepted by COTS UE.
The gNB MAC might need to stop transmission either for some time (RRC
processing), or continuously (transmission stop requested by CU). Those
can be handled in one common timer implementation. The continuous case
will be used in a follow-up commit.
Co-authored-by: Luis Pereira <lpereira@allbesmart.pt>
CI: remove unused code, clean up imports
* Remove pyshark, matplotlib imports, as they are not used
* Remove stats_monitor.py, as the CI does not use it
* Clean up many warnings shown by pyflakes regarding includes that we don't use
pyflakes warns about various errors, addressed here. For cls_cluster.py,
remove (unknown) sys.exit and replace through Exception, as sys.exit()
has the unwanted effect that the CI script would stop. Instead, raise
an Exception that would show the problem in the HTML, and ensures that
the script runs until the end.
These are the warnings flagged by pyflakes.
cls_cluster.py:297:4: undefined name 'sys'
cls_containerize.py:39:1: 'subprocess' imported but unused
cls_containerize.py:41:1: 'threading' imported but unused
cls_containerize.py:43:1: 'multiprocessing.Process' imported but unused
cls_containerize.py:43:1: 'multiprocessing.Lock' imported but unused
cls_containerize.py:43:1: 'multiprocessing.SimpleQueue' imported but unused
cls_containerize.py:49:1: 'cls_cluster as OC' imported but unused
cls_containerize.py:50:1: redefinition of unused 'cls_cmd' from line 42
cls_module.py:28:1: 'os' imported but unused
cls_module.py:29:1: 'sys' imported but unused
cls_module.py:34:1: 'subprocess' imported but unused
cls_module.py:35:1: 'datetime.datetime' imported but unused
cls_module.py:211:11: undefined name 'sshconnection'
cls_oaicitest.py:37:1: 'pexpect' imported but unused
cls_oaicitest.py:47:1: 'cls_cluster as OC' imported but unused
cls_oaicitest.py:54:1: 'matplotlib.pyplot as plt' imported but unused
cls_oaicitest.py:55:1: 'numpy as np' imported but unused
cls_oai_html.py:34:1: 'sys' imported but unused
cls_oai_html.py:41:1: 'multiprocessing.Process' imported but unused
cls_oai_html.py:41:1: 'multiprocessing.Lock' imported but unused
cls_oai_html.py:41:1: 'multiprocessing.SimpleQueue' imported but unused
cls_physim.py:37:1: 'multiprocessing.SimpleQueue' imported but unused
cls_static_code_analysis.py:39:1: 'time' imported but unused
cls_static_code_analysis.py:40:1: 'multiprocessing.Process' imported but unused
cls_static_code_analysis.py:40:1: 'multiprocessing.Lock' imported but unused
cls_static_code_analysis.py:40:1: 'multiprocessing.SimpleQueue' imported but unused
epc.py:41:1: 'multiprocessing.Process' imported but unused
epc.py:41:1: 'multiprocessing.Lock' imported but unused
epc.py:41:1: 'multiprocessing.SimpleQueue' imported but unused
main.py:60:1: 'pexpect' imported but unused
main.py:66:1: 'datetime' imported but unused
main.py:68:1: redefinition of unused 'subprocess' from line 63
main.py:70:1: 'multiprocessing.Process' imported but unused
main.py:70:1: 'multiprocessing.Lock' imported but unused
main.py:70:1: 'multiprocessing.SimpleQueue' imported but unused
provideUniqueImageTag.py:2:1: 'os' imported but unused
Integration: `2024.w42`
Closes#547, #853, #854, #858, #859, #862, #844, and #746
See merge request oai/openairinterface5g!3053
* !3047 Resolve compilation warnings on ARM
* !3052 Optimize T_ID() macro.
* !3045 CI: Reduce tested DL throughput on Aerial
* !3039 fix for Other SI reception when BWP start != 0
* !2997 websrv regression
* !3041 Update NR SA Tutorials
* !3042 Update TESTBenches.md to reflect current testbench
* !3004 Hotfix to remove an unwanted TX power reduction when using multiple TX antenna ports.
* reduce ssPBCH_BlockPower in gNB config of FHI7.2 pipeline
* !3046 A testsuite and a benchmark for RLC AM mode
* !3038 Various bugfixes for gNB stability, cleanup
* !3051 PUCCH2 DTX detection
* nr_psbchsim: fix segv by providing correct get_nrUE_params()
* !3049 Improve PUSCH and PUCCH SNR stability
* !3054 Allocate and add sD to DRB NSSAI in case sD != 0xffffff
Currently, sD has not been allocated, so the octet string is empty. Fix the
allocation to correctly write&read NSSAIs in UE context setup/modification
request messages.
When running, nr_psbchsim, we get this UBsan error:
openair1/PHY/NR_UE_ESTIMATION/nr_adjust_synch_ue.c:79:16: runtime error: member access within misaligned address 0x0ff4278c791c for type 'struct nrUE_params_t', which requires 8 byte alignment
The problem is that the corresponding definition of
get_nrUE_params() in psbchsim.c does not actually return the UE params,
but void, so we might or might not get something that resembles valid
data in nr_adjust_synch_ue.c. Fix this by including nr-uesoftmodem.h
(that provides the correct declaration) and define it correctly. Due to
type mismatches, also adapt downlink_frequency, uplink_frequency_offset,
and openair_cfg (which might result in the same type of bugs).
This adds DTX detection in PUCCH 2 receiver. This is detected by MAC
already which will drop PUCCH 2 indications that are detected as DTX.
For the moment this uses the same pucch0_dtx_threshold value indicated
in L1 section of the configuration file. The feature firstly reduces
unnecessary logging on stdout and the use of invalid CSI measurements in
the MAC scheduler.
Closes: #547
- Fixes#853, #854, #858, #859, #862
- handle repeated NGAP Initial context setup requests, thereby fixing assert:
Assertion (!ue_p->as_security_active) failed!
In rrc_gNB_generate_SecurityModeCommand() /home/eurecom/raymond/openairinterface5g/openair2/RRC/NR/rrc_gNB.c:2590
logic error: security already activ
- A lot of cleanup: remove almost all use of protocol_ctxt_t in 5G RRC and use
existing pointers instead
Guido Casati