When doing analogue beamforming, the beam ID for a pre-defined beam
table is passed directly to RU and there is no need to store the beam
table in PHY.
NR UE: calculate TA based on SIB19 information in NTN mode, if autonomous TA is not enabled
To achieve the goal, the hyper frame number (HFN) is introduced at the NR UE
PHY, MAC and RRC layers.
Besides this, we also implemented an orbit propagation to improve the accuracy
of N_UE_TA_adj, and a fix to keep the N_TA from RAR and MAC CE.
Fixes#981
Correctly copy nFAPI messages
All nFAPI message have copy helpers, so use that for "loading" nFAPI
messages into the L1. This also fixes a bug/error message
2. 0 no corresponding tx_data.request for dl_tti.request index 11, dropping
because the loop over DL_tti.request assumed that all messages are PDSCH
PDUs, when we can have others such as PDCCH, etc. In other words, when
looking up indices ("11" in the example above), we were checking also
inside other messages for SSB, PDCCH, etc, which is of course wrong.
That loop was an attempt to validate matching PDSCH PDUs with
TX_data.requests. This check is already done inside
phy_procedures_gNB_TX() through an assert, but this commit replaces with
the equivalent check previously inside nr_pnf_p7_get_msgs(). This is ok,
as the L1 cannot trust the scheduler (in monolithic) to provide the
correct information, either.
Fixes: eefb9da6 ("Reimplement nFAPI message exchange after msgDataTx removal")
All nFAPI message have copy helpers, so use that for "loading" nFAPI
messages into the L1. This also fixes a bug/error message
2. 0 no corresponding tx_data.request for dl_tti.request index 11, dropping
because the loop over DL_tti.request assumed that all messages are PDSCH
PDUs, when we can have others such as PDCCH, etc. In other words, when
looking up indices ("11" in the example above), we were checking also
inside other messages for SSB, PDCCH, etc, which is of course wrong.
That loop was an attempt to validate matching PDSCH PDUs with
TX_data.requests. This check is already done inside
phy_procedures_gNB_TX() through an assert, but this commit replaces with
the equivalent check previously inside nr_pnf_p7_get_msgs(). This is ok,
as the L1 cannot trust the scheduler (in monolithic) to provide the
correct information, either.
Fixes: eefb9da69a ("Reimplement nFAPI message exchange after msgDataTx removal")
Implementation of STOP exchange
This implements the STOP.request/indication for all 3 transport mechanisms, the
VNF will send the STOP.request to the PNF, indicating it will disconnect, and
await a STOP.indication from the PNF
The WLS VNF is reworked to be able to start before the PNF, by calling call
rte_eal_init and rte_dev_probe to determine if dpdk has been initialized
properly, before calling rte_eal_init in the intended process when it is
appropriate to do so
Instead of trying to estimate N_UE_TA_adj with a second degree polynomial,
we introduce orbit propagation to calculate N_UE_TA_adj with higher accuracy.
When we receive the satellite ephemeris data consisting of the satellite position vector
and the satellite velocity vector, we calculate parameters for orbit propagation, assuming
a circular orbit in the plane created by the satellite position vector and the satellite
velocity vector. This is done in the function prepare_ue_sat_ta().
Every millisecond, we use these parameters together with the time since epoch to calculate
the satellite position on that orbit and from this the reound-trip-time between UE and the
satellite, what corresponds to N_UE_TA_adj. This is done in the function apply_ntn_timing_advance().
Reimplement nFAPI message exchange between L1 and L2 following the
changes in parent commit removing msgDataTx.
Avoid direct calls and use NR_IF_module fptrs to avoid linking problems.
allowing to remove some function definitions that are not needed.
This implements the STOP.request/indication for all 3 transport mechanisms, the VNF will send the STOP.request to the PNF, indicating it will disconnect, and await a STOP.indication from the PNF
The WLS VNF is reworked to be able to start before the PNF, by calling call rte_eal_init and rte_dev_probe to determine if dpdk has been initialized properly, before calling rte_eal_init in the intended process when it is appropriate to do so
1. Refactor PDCCH PHY functions to take rxdataF of one OFDM symbol and
produce LLR for each search space. The modified functions take
rxdataF in a different format than that produced by nr_slot_fep(). So
for now a memcpy is used to change the array structure. Once
nr_slot_fep() is modified, this memcpy will no longer be needed and
will be removed.
2. Modify DCI functions to decode DCI in the last PDCCH symbol and
inidcate to MAC once.
3. Fix PDCCH monitoring for start symbol > 0.
4. Fix multiple PDCCH monitoring within slot.
Co-authored-by: Sakthivel Velumani <mail@sakthi.me>
Fix an issue in which the unpacking is erroneously deemed unsuccessful even though it succeed in pulling all the bytes, this was due to not properly handling the return value of pull16 which is either 0 or 2, not 0 or 1.
Check the results of push and pull operation with correct boolean operator.
Revert "Removed TRP-scheme byte from UL BF PDU to Interop with Aerial 25-1 (FAPI 10.02)"
This commit broke compatibility with Aerial when compiled with
-DSCF_FAPI_10_04_SRS=ON. It was decided that this should become the
default.
Modify documentation, and use a dedicated image name to make it clear in
the CI that it has SRS.
This commit broke compatibility with Aerial when compiled with -DSCF_FAPI_10_04_SRS=ON. It was decided that this should become the default.
This reverts commit 8beb382277.
Refactor ULSCH scheduler towards more TDD pattern flexibility
Refactors ULSCH scheduler, notably to support "UL-heavy" TDD patterns,
e.g., DSUUU. Also allows to run TDD pattern2 with UL slots, which was a
limitation in the previous code.
Adds the capability to pack/unpack the TDD table in CONFIG.request
following both SCF222.10.02 (Tag 0x1027) and SCF222.10.04 (Tag 0x1035)
formats In the case of Aerial, the TDD table is packed following the
10.04 format, but with the 10.02 tag Prevent the packing of Digital
Beamforming table and Precoding Matrix table for Aerial
Add WLS as a transport option for VNF/PNF, refactor existing options
This MR adds a new transport mechanism for the VNF and PNF split, using
the Intel WLS library, which makes use of DPDK and shared memory to
transport messages. This transport mechanism is what is used to
interface with Radisys ODU, while also working with OAI VNF/PNF.
The VNF and PNF have been refactored so that the transport-specific
functions are isolated from the rest of the logic, and as such,
interchangeable by means of function pointers.
The same change is done for the packing/unpacking procedures, allowing
to switch between FAPI and nFAPI encoding.
This MR also reduces the amount of duplicated code, by refactoring the
VNF with Aerial, which now only has the transport-relevant functions, as
well as the ones that are unique to it ( for example, the unpacking
procedures where a secondary data buffer is used for the message
payloads )
Additionally a new callback is added to the VNF to process
ERROR.indication messages, which currently only indicates which message
originated the error, and which error occurred.
Checks whether there are at least 4 bytes available to pull tag and length values.
On tlv_list unpack, if the size is sent as 0, immediately exit the function
Created a function nr_error_ind_cb for the VNF that takes a received ERROR.indication and shows some details regarding the reported error from the PNF, since up until now it was not handled and treated as an unknown message.
Proper error handling procedure not created, only shows that the error occurred.
Add check to vnf_nr_handle_param_response for when phy_info is not found
The WLS VNF is in charge of Enqueueing the used blocks after usage for transport, this is done by keeping track of all blocks used, and calling WLS_Enqueue for all of them upon receiving a SLOT.indication
The common library exposes functions for the PNF to return the received blocks to the VNF for it to call WLS_Enqueue on them.
This is done in order to ensure the Blocks are returned after processing, also preventing the Dequeueing of blocks that are still being used, i.e. the internal value is not -1
All saved blocks are to be enqueued at the reception of a SLOT.indication by the VNF
Additionally, the definition of NFAPI_MAX_PACKED_MESSAGE_SIZE was moved to nfapi_interface.h and removed from the other headers, this is done to allow to set the maximum message size when using WLS by only changing the value in one place
Fixup fapi_nr_message_header_unpack call in nfapi_hex_parser
Switches the used socket type in pnf_interface.c and vnf_interface.c.
These values must always be the same in both components so the same socket type is used in both
Adds 3 new function pointers to the P5 and P7 VNF structures, allowing to configure which function to use to pack/unpack the messages, as well as unpack the message header, being then used seamlessly regardless of using the FAPI or nFAPI functions.
Adds 3 new function pointers to the P5 and P7 PNF structures, allowing to configure which function to use to pack/unpack the messages, as well as unpack the message header, being then used seamlessly regardless of using the FAPI or nFAPI functions.
Changes the header unpack and message unpack functions to return true on success and false on failure, instead of an int
This change is done in preparation to add the header unpack functions to the VNF and PNF structures as function pointers, used to peek the message headers prior to processing.
Add a faux fapi_nr_p7_message_header_unpack with the same signature as nfapi_nr_p7_message_header_unpack, to be used for the P7 header unpack function pointer.
francescomani