Fix Dedicated BWPs
- Improve SearchSpace selection
- Improve CORESET selection
- Fix fill 'initialDownlinkBWP->pdsch_Config' when there are
DedicatedBWPs
* This fixes the reported 'RSRP = 0' issue when the UE is in the
InitialBWP and we have DedicatedBWPs configured
- Add a 'common' type SearchSpace in the NR_BWP_DownlinkDedicated IE for
DedicatedBWPs
- Fix hardcoded 'controlResourceSetId' by making it dynamic
- Remove 'searchspaceid' from 'verify_agg_levels' function because it
was used only for LOG
- CI: Add DedicatedBWP to '40 MHz TDD F1+E1 SA' in
'RAN-SA-B200-Module-SABOX-Container'
Following frequency change in the pipeline, we observed degraded UL channel
conditions resulting in low UL throughput. Increasing attenuation on the gNB
side was found to mitigate this issue by improving UL channel quality
and reducing UL noise power.
Increase tested UL and DL bitrates in OAIUE pipeline.
bugfix: read msg_type only after deciphering
There was a problem with accessing msg_type from the input buffer before
deciphering, giving obviously wrong value.
CI team: we should add a test in the CI with NAS ciphering + integrity
(connection to the core) set to not null (I suggest nea2/nia2). With
openair's core, this is done by setting this in the amf config file
(nia1 and nea2 at the top of the list):
supported_integrity_algorithms:
- "NIA2"
- "NIA1"
- "NIA0"
supported_encryption_algorithms:
- "NEA2"
- "NEA1"
- "NEA0"
And also put full security in the AS. This is done with this in the gnb
config file:
security = {
ciphering_algorithms = ( "nea2", "nea0" );
integrity_algorithms = ( "nia2", "nia1", "nia0" );
drb_ciphering = "yes";
drb_integrity = "yes"
};
Ideally we should test this with both openair UE and cots UE. But as a
strict minimum do for openair UE (this is where the bug was).
No need to do much traffic, a few ping is enough. But if you want to
check throughput with full security, why not.
Enabling usage of ulsyncvalidityDuration timer in SIB19
ntn-UlSyncValidityDuration in SIB19 from Spec 38.331 v17.12 A validity
duration configured by the network for assistance information which
indicates the maximum time duration (from epochTime) during which the UE
can apply assistance information without having acquired new assistance
information. The unit of ntn-UlSyncValidityDuration is second. Value s5
corresponds to 5 s, value s10 indicate 10 s and so on.
ntn-UlSyncValidityDuration-r17 ENUMERATED{ s5, s10, s15, s20, s25, s30, s35,s40, s45, s50, s55, s60, s120, s180, s240, s900}
Implementation of epochtime is under discussion.
It can be configured in configuration file according to the above
enumeration. For GEO - 240s, MEO - 20s, LEO-5s can be used.
Following a power cycle of the CI machines in the NSA-B200 setup, the gNB
machine encountered a networking issue. Although packets were observed leaving
and returning to the host of gNB, they failed to reach the container.
Debugging steps taken:
- upgraded the gNB machine
- reinstalled Docker
- reviewed and verified IP rules and routing settings
Setting the container to use host network mode resolved the issue.
Improve radio for Metanoia RU (and likely others)
We introduced a regression that lowered the achievable DL throughput
with at least the Metanoia RU (i.e., in the configuration and the UE
that we use). git bisect showed up one commit, which does not seem
necessary. We just revert this commit, as it improves the throughput and
does not seem to have a negative impact on performance.
Further, increase RLC buffers a bit. Limit 7.2 pipeline number of layers
to 2.
With PMI reporting working (see HEAD^^), it seems that four layers put
two much processing strain on the machine (cacofonix), which asserts
immediately. In tests, it was found that the same test throughput
(600Mbps) can be achieved with two layers, while not crashing the
machine.
CI: Replacing Devkit server with a Grace Hopper in Aerial pipeline
Switch servers on the Aerial pipeline from Gigabyte (AMD) to Grace
Hopper (ARM), and make the necessary changes:
- Update XML, YAML, and gnb.conf
- Change the argument passed to the L1 in aerial_l1_entrypoint.sh to be
compatible with the GH
- Update the Aerial setup in TESTBench.md and Aerial_FAPI_Split_Tutorial.md docs
- Decrease the tested throughput due to an issue with the RU. Will open
another MR to increase it once the problem is fixed.
- Update the N2 and N3 IP addresses to match the Grace Hopper's in the gnb.conf.
- Remove the test XML file for pulling images in the ARM image builder.
- Update the Aerial XML file to pull ARM images.
- Decrease tested throughput (temporarily) due to problems with Foxconn RU
- use Ubuntu image, instead of RHEL image - gNB fails with "Illegal
instruction" during RA, when running with RHEL image
- init DPDK in VA mode
- increase number of cores Tpool
fhi_72: allow to provide dpdk_iova_mode to xran
- Introduce a gNB configuration option that enables users to select the
desired IOVA mode for DPDK ("PA" or "VA") with dpdk_iova_mode
parameters in fhi_72 configuration section. If not set, the default
remains PA mode to ensure backward compatibility with existing
configurations. Detailed information about IOVA modes, including their
advantages and disadvantages, can be found in the DPDK documentation:
Memory in DPDK Part 2: Deep Dive into IOVA
- Using IOVA VA mode allows DPDK to run without requiring SYS_ADMIN
capability for the docker container.
- Switch to IOVA VA mode in the FHI7.2 pipeline and reduce the required
capabilities for the docker container.
Config files improvements for PRACH
Some PRACH parameters in configuration files are not properly set.
- number of SSB per RACH occasion should be 1 when we have only 1 SSB
(it would still work with 1/2 but it makes little sense and might
limit UE selection of ROs).
- some PRACH configuration indices would generate PRACH conflicting with
PUCCH and therefore reducing scheduling capabilities
Further cleanup of some config files still using deprecated fields
Switching to IOVA VA mode in the FHI7.2 pipeline reduces the required
capabilities for the Docker container. This change allows the removal
of the SYS_ADMIN capability.
SIB19 utilization on UE
Following SIB19 initialization and scheduling on gNB (!2899 - merged)
and Receive SIB19 on nrUE (!2920 - merged), this merge request aims to
introduce the actual use of the SIB19 provided parameters by gNB in UE.
Changes needed for utilization include: initialization of position
coordinates parameters for UE (which are needed to calculate propagation
delay between UE and SAT), propagation delay calculations and timing
advance adjusts. Moreover, this change removes the now unused arguments
for ntn_koffset, ntn_ta_common and ntn_ta_commondrift
Robert Schmidt