Remove --usim-test command line option
Remove the --usim-test option: to my knowledge, it's not used by users,
and is misleadingly placed in various places where there should not be a
difference w.r.t. USIM configuration.
When making the changes, I assumed that --usim-test would be 0 (the
default), which is the case in all executables when not specified in
options except for the nr_dlsim, nr_pbchsmi, nr_ulsim simulators.
The only exception is the initialization of PDCP from the MAC, which
does not seem to be correct (the PDCP is in the CU, so it does not make
sense to call it from the MAC which is in the DU).
Synchronized Real-Time Data Recording Application Addition
The main Features of Synchronized Real-Time Data Recording Application:
- The Data Recording Application runs in parallel to the gNB or UE
server or in another server as Data Recording or Data Lake Server
- It makes use of (an extended version) of OAI’s T-tracer framework
- It communicates with base station, and user terminal
- It synchronizes and combines data traces and control information
(meta-data) from Base station and User terminal into consistent SigMF
data sets
Details on implementation addition:
- T_tracer Extension to Support up to 35 Parameters in the T() macro
- Add traces on gNB PHY UL and related requirement: FD PUSH IQ, FD DMRS, and UL Channel estimates wi/wo interpolation, and Rx Payload bits:
1. The required memories have been created and initialized in:
openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c
2. Those memories: memory for DMRS signals, memory for channel
estimates based on DMRS positions, memory to store slot grid with
channel coefficients based on DMRS positions after interpolation,
and memory to store extracted data including PUSCH + DMRS.
3. The input parameters to nr_pusch_channel_estimation() has been
updated to get the pointer to the added memories of
pusch_dmrs_slot_mem and pusch_ch_est_dmrs_pos_slot_mem
(openair1/PHY/NR_ESTIMATION/nr_ul_estimation.h)
4. The DMRS grid of NR slot and the estimated channel coefficients at
DMRS locations are logged to created memories in:
openair1/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c
5. The function inner_rx in
openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c is updated to log
the extracted ULSCH PRBs and the interpolated channel coefficients.
6. The T-macro() has been called in
(openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c) to trace added
traces: T_GNB_PHY_UL_FD_DMRS, T_GNB_PHY_UL_FD_CHAN_EST_DMRS_POS,
T_GNB_PHY_UL_FD_PUSCH_IQ, T_GNB_PHY_UL_FD_CHAN_EST_DMRS_INTERPL
- Add traces on UE PHY UL and related requirement: Tx Scrambled bits and Tx payload bits
1. Update input parameters to nr_ulsch_encoding () in
nr_transport_proto_ue.h to get number_dmrs_symbols to be added to
meta-data.
2. In nr_ulsch_coding.c: Trace UE PHY UL Payload TX bits (T_message:
T_UE_PHY_UL_PAYLOAD_TX_BITS) including related meta-data and UTC
time.
3. In nr_ulsch_ue.c: Trace UE PHY UL Scrambled TX bits (T_message:
T_UE_PHY_UL_SCRAMBLED_TX_BITS) including related meta-data and UTC
time.
4. Fix the input prameters in nr_ulsch_encoding () called in
(openair1/SIMULATION/NR_PHY/ulschsim.c) since a new input parameter
has been added.
- Add Data Collection Services (T-Tracers for gNB and UE)
1. Add _tracer_app_gnb and t_tracer_app_ue apps to common/utils/T/tracer/Makefile
2. Add Data collection Service for gNB: common/utils/T/tracer/t_tracer_app_gnb.c
3. Add Data Collection Service for UE: common/utils/T/tracer/t_tracer_app_ue.c
- Add Shared memory configuration
(common/utils/T/tracer/shared_memory_config.h), since we will have too
much memory consumption on the stack if the T-tracer is not fast
enough to process the traces or if we have too much traces. As a
result, tracers start to capture data, write data in shared memory,
then close the T-Tracer after getting the recording of N slots. The
Data recording App will read data from the shared memory.
- Add Main app of Data Recording Application v1.0 including: Config
files, SigMF Interface, Config Interface, Sync Service, and def
messages: The data recording App includes mainly the following files:
1. The main app: data_recording_app_v1.0.py that has the data control
service, interact with tracers, data sync and conversion service.
2. The configuration file:
common/utils/data_recording/config/config_data_recording.json
3. The wireless dictionary file:
common/utils/data_recording/config/wireless_link_parameter_map.yaml
4. Config Interface
(common/utils/data_recording/lib/config_interface.py) that reads
the configuration for both gNB and UE.
5. Sync interface (common/utils/data_recording/lib/sync_service.py)
that sync captured data for gNB and UE before saving them in SigMF
format
6. The SigMF Interface
(common/utils/data_recording/lib/sigmf_interface.py) to store
recorded data and meta-data in SigMF format
7. A simple script
(common/utils/data_recording/sync_validation_demo.py) to validate
that the recorded bits from gNB and UE are in Sync
- For more info look to doc/data_recording.md
Remove the --usim-test option: to my knowledge, it's not used by users,
and is misleadingly placed in various places where there should not be a
difference w.r.t. USIM configuration.
When making the changes, I assumed that --usim-test would be 0 (the
default), which is the case in all executables when not specified in
options except for the nr_dlsim, nr_pbchsmi, nr_ulsim simulators.
The only exception is the initialization of PDCP from the MAC, which is
not correct (the PDCP is in the CU, so it does not make sense to call it
from the MAC which is in the DU). Instead, always initialize from main,
even in the NSA case (NSA was covered by the incorrect initialization
from MAC).
This in turn let to some more cleanup around function du_rlc_data_req().
After receiving GTP packets at the DU, they were given to the PDCP to
enqueue the packet at RLC. This does not work anymore, since the PDCP is
not initialized; it also does not seem necessary, as this enqueue
functionality is necessary to decouple PDCP and RLC to avoid deadlocks
in monolithic, but in split-mode, this cannot happen. Instead, call
directly into the RLC when receiving GTP packets.
It provides and overview about the Architecture, Requirement Packages,
Configuration Files, How to run Data Recording Application, and an
Overview on Collected Data Set.
CI: Change RU in Aerial setup from Foxconn to WNC
- Change frequency in the gNB config file, from 3.75GHz to 3.5GHz
- Add high throughput tests with may_fail tag (1Gbps in DL and 90Mbps in UL)
- Update Aerial tutorial to match the changes
Measurement gaps
Scheduling measurement gaps to provide sufficient time for the UE to
re-tune its transceiver to the target carrier, complete the set of
measurements and then re-tune its transceiver back to the original
carrier.
Add WLS as a transport option for VNF/PNF, refactor existing options
This MR adds a new transport mechanism for the VNF and PNF split, using
the Intel WLS library, which makes use of DPDK and shared memory to
transport messages. This transport mechanism is what is used to
interface with Radisys ODU, while also working with OAI VNF/PNF.
The VNF and PNF have been refactored so that the transport-specific
functions are isolated from the rest of the logic, and as such,
interchangeable by means of function pointers.
The same change is done for the packing/unpacking procedures, allowing
to switch between FAPI and nFAPI encoding.
This MR also reduces the amount of duplicated code, by refactoring the
VNF with Aerial, which now only has the transport-relevant functions, as
well as the ones that are unique to it ( for example, the unpacking
procedures where a secondary data buffer is used for the message
payloads )
Additionally a new callback is added to the VNF to process
ERROR.indication messages, which currently only indicates which message
originated the error, and which error occurred.
Add a section in nfapi.md related to the different transport mechanisms available for VNF/PNF communication
Edit NR_NFAPI_archi.md to describe the VNF and PNF processing logic, as well as adding a flowchart for each of the components execution
Add the necessary patch to install the WLS library in the system
Enabling usage of ulsyncvalidityDuration timer in SIB19
ntn-UlSyncValidityDuration in SIB19 from Spec 38.331 v17.12 A validity
duration configured by the network for assistance information which
indicates the maximum time duration (from epochTime) during which the UE
can apply assistance information without having acquired new assistance
information. The unit of ntn-UlSyncValidityDuration is second. Value s5
corresponds to 5 s, value s10 indicate 10 s and so on.
ntn-UlSyncValidityDuration-r17 ENUMERATED{ s5, s10, s15, s20, s25, s30, s35,s40, s45, s50, s55, s60, s120, s180, s240, s900}
Implementation of epochtime is under discussion.
It can be configured in configuration file according to the above
enumeration. For GEO - 240s, MEO - 20s, LEO-5s can be used.
A number of radio-related RRC parameters, e.g., CellGroupConfig,
"originate" at the DU and are sent to the CU for forwarding to the UE
only. Similarly, there are additional parameters, e.g., RLC-BearerConfig
(part of CellGroupConfig), that originate at the DU.
Hence, the DU decides about these parameters, depending on the MAC state
and capabilities. To clarify this, move the existing
openair2/RRC/NR/nr_rrc_config.{c,h} => openair2/LAYER2/NR_MAC_gNB/nr_radio_config.{c,h}
So that developers know that while those are RRC parameters, they
originate at the DU.
In other words, the CU/RRC is not supposed to use any of these functions
in the RRC. Correspondingly, includes of this file have been cleaned up
(and when they are not necessary at the MAC as well).
Tutorials: updates for NR SA Tutorials
- Update links for the latest Ubuntu 24.04.2 LTS iso file
- Update docker install to the latest instructions on the official
website
- Update UHD to v4.8.0.0
- Add support for 'default'/"empty" DNN to CN5G configuration file
* Add support for 'default' DNN to CN5G configuration file (that
will also be used when DNN is not available, "empty" DNN). This
configuration will allow most of the COTS UE to get PDUSession
without any APN configuration made by the user
* The 'default'/"empty" DNN configuration support was added in
oai/cn5g/oai-cn5g-amf!343
Add physim tests into ctest framework
Convert physim testcases listed in
cmake_targets/autotests/test_case_list.xml into ctest. Note: Tests for
dlsim_tm4 are excluded, due to compilation issues.
CTest evaluates success based on return code: '0' = pass, non-zero =
fail. For some simulators, the return code is non-zero even when the
test is successful (as indicated by success messages in the test logs).
For some simulators, the return code is always '0'. This inconsistency
has been address in the first two commits of this MR.
To build and execute these tests:
- using cmake
cd openairinterface5g
mkdir build && cd build # you can also do that in cmake_targets/ran_build/build
cmake .. -GNinja -DENABLE_PHYSIM_TESTS=ON && ninja tests
ctest
- using build_oai: physim-related ctests are activated when PHY
simulators are built (use build_oai with '-P' or '--phy_simulators'
option)
cd openairinterface5g/cmake_targets
./build_oai --ninja --phy_simulators
cd ran_build/build
ctest
Link to newly created 4g and 5g RAN-Physim-Cluster pipelines:
- RAN-Physim-Cluster-4G: https://jenkins-oai.eurecom.fr/job/RAN-Physim-Cluster-4G/
- RAN-Physim-Cluster-5G: https://jenkins-oai.eurecom.fr/job/RAN-Physim-Cluster-5G/
Fix Liteon with MTU 1500 and update the FHI docs
- Closes#884 - needed to update the max fragments needed for
transmission of one symbol; technically, 5 are enough but due to wrong
equation in the xran F release we had to increase to 6
- Clarify packet length for VFs
- Update Foxconn doc and config file with MTU set for jumbo frames
- Update Benetel docs with new version v1.2.2
As per CUS spec, the MTU can be 1500 or 9000 B, where MTU = IQ data format.
Packet length = ethernet header + RTE_PKTMBUF_HEADROOM + MTU
However, xran assumes different definitions of the MTU:
(1) in xran_init_mbuf_pool(): MTU = ethernet header + IQ data format;
(2) in xran_get_num_prb_elm(), xran_init_PrbMap_from_cfg(), xran_init_PrbMap_from_cfg_for_rx(), xran_init_PrbMap_by_symbol_from_cfg(): MTU = complitely wrong (as the IQ data format is not well included).
Additionally, xran assumes that the max MTU 9600 B, instead of 9000 B as per spec.
Nevertheless, I left 9600 B in all config files and docs due to wrong calculation of (2) for the total number of PRBs per fragment.
1. Closes#884 - increase the XRAN_MAX_FRAGMENT from 4 to 6 (sufficient for MTU 1500 with compression 8b)
2. Add new firmware version that supports jumbo frames
3. Update the config file to align with the new Liteon unit in our lab - center frequency, jumbo frames, compression and RU MAC address,
as well as the max DL MIMO layers.
Add support for 'default' DNN to CN5G configuration file (that will also be used when DNN is not available, "empty" DNN). This configuration will allow most of the COTS UE to get PDUSession without any APN configuration made by the user
The 'default'/"empty" DNN configuration support was added in https://gitlab.eurecom.fr/oai/cn5g/oai-cn5g-amf/-/merge_requests/343
After capturing the FH packets, we observed that the RU supports the MTU value for jumbo frames.
Therefore, no fragmentation needed on DL.
Co-authored-by: Teodora Vladic <teodora.vladic@openairinterface.org>
Robert Schmidt