CORESET start multiple of 6 fix
According to the standard any CORESET (except CSET0) would always start
from the first common resource block index which is multiple of 6 in the
BWP. This was not taken into account in the code. The BWP switch CI test
is modified to test a BWP start not multiple of 6.
An exception is the case where rb-Offset-r16 parameter is set, but can't
be used at gNB for FAPI compatibility.
Closes: #1037
Make sure to apply Doppler and TA not directly when receiving the target cell ntn_config,
but apply Doppler just before the initial sync, and the TA after the initial sync when
we have tha actuel cell frame and slot numbers.
We need the ntn_config when reconfiguring the PHY layer for a new initial sync,
e.g. for calculating the DL Doppler frequency.
As a dedicated scheduled_response dl_config PDU it reaches the PHY layer too late,
as part of the phy_config.config_req it reaches the PHY layer in time with the
other configuration values.
Reset outdated PUCCHs to avoid Assertion caused by non-processed and
active PUCCHs
When there is real-time issues in L1 it may happen that the scheduler
misses/skips some slots, thus, L2 not processing and not freeing some
structures like PUCCH. This commit avoids the Assertion by resetting
any Active outdated PUCCH
Pass beam ID as per FAPI v222.10
This MR
1. Sets MSB of beam ID when passing beam ID to 7.2 radio
2. Modifies phytest scheduler to allocate SSBs on different beams
3. Introduce new MAC config parameter for beam mode to specify HiPHY or LoPHY
beamforming
When doing analogue beamforming, the beam ID for a pre-defined beam
table is passed directly to RU and there is no need to store the beam
table in PHY.
When there is real-time issues in L1 it may happen that the scheduler misses/skips some slots, thus, L2 not processing and not freeing some structures like PUCCH.
This commit avoids the Assertion by resetting any Active outdated PUCCH
NR UE: calculate TA based on SIB19 information in NTN mode, if autonomous TA is not enabled
To achieve the goal, the hyper frame number (HFN) is introduced at the NR UE
PHY, MAC and RRC layers.
Besides this, we also implemented an orbit propagation to improve the accuracy
of N_UE_TA_adj, and a fix to keep the N_TA from RAR and MAC CE.
Fixes#981
In all cases (CFRA in SA for HO, or CFRA in NSA/do-ra for access), the
UE has the full configuration already. We can therefore directly switch
to a dedicated search space, as it is already known to the UE.
... so if we want to have 1 BWP configured at any given time we need to
reconfigure BWP 1 every time. This means that since the gNB has more
than 1 BWPs (for use for different UEs), that there is a "gNB BWP ID"
(as used by the gNB), which can be any BWP ID X, and one "UE BWP ID",
which is always 1. This commit implements this distinction.
Return from triggering reconfiguration with BWP switch if BWP is the
same as before the switch, and add check to verify if BWP triggered by
switch command exists
CFRA: mark RA complete when sending Msg2
The current contention-free random access forces a "Msg3" (which does
not exist in CFRA) to be received by a UE. Sometimes, this "Msg3" is not
received (for whatever reason), and the MAC declare that RA failed.
This is problematic, as the spec says that RA is complete once Msg2 is
received by the UE. Since the gNB cannot know when this is, simply mark
it as complete once we sent Msg2.
We still send Msg3 in CFRA, which is explained further in the commits.
Also, improve logging and stabilize an RFsim test by reducing sl_ahead.
Since the parent commit, CFRA is inconditionally marked complete on Msg3
reception (successful or not). This works because the current
implementation still sends a UL grant (see parent commit for details).
In this commit, handle Msg3 if received in CFRA (notably for TA and
power). Note that since we declare RA complete, UE->ra does not exist
anymore, and so an intermediate variable is introduced to capture the
CFRA flag. The code should be such that if we are in CFRA, we never
access any UE->ra variable.
The current contention-free random access forces a "Msg3" (which does
not exist in CFRA) to be received by a UE. Sometimes, this "Msg3" is not
received (for whatever reason), and the MAC declare that RA failed.
This is problematic, as the spec says that RA is complete once Msg2 is
received by the UE. To avoid this, inconditionally mark RA as complete
as soon as we receive an indication of Msg3 (DTX or not).
Note that after this change, we still send a UL grant in Msg2. This is
because 38.321 §5.1.4 is not clear to me whether we should send UL grant
(it does not explicitly exclude it), and it says
> 3> if the Random Access Response includes a MAC subPDU with RAPID only:
> [...]
> 4> indicate the reception of an acknowledgement for SI request to
> upper layers.
which is NOT the case (but then I don't know/think we can have CFRA for
SI request?). Since it also works with COTS UE, I leave Msg3 for the
moment.
The reason to not directly mark RA as complete when sending Msg2 is
because of possible retransmissions in do-ra mode. In fact, in do-ra,
there might already be data awaiting. In that case, the DLSCH scheduler
schedules data _in the same slot as Msg2_, which the UE does not decode,
leading to retransmissions.
Fix reestablishment after handover
- fix reestablishment by not re-creating LCIDs with priority set to 0 (see first
commit for more details)
- cleanup code
The idea is to reestablish all RLC entities (it's a new UE, and we set
reestablishRLC on all bearerrs), so we should reestablish all RLC
entities on gNB side as well, without any additional loop.
Co-authored-by: Roberto Magueta <rmagueta@allbesmart.pt>
Robert Schmidt