Switching to IOVA VA mode in the FHI7.2 pipeline reduces the required
capabilities for the Docker container. This change allows the removal
of the SYS_ADMIN capability.
SIB19 utilization on UE
Following SIB19 initialization and scheduling on gNB (!2899 - merged)
and Receive SIB19 on nrUE (!2920 - merged), this merge request aims to
introduce the actual use of the SIB19 provided parameters by gNB in UE.
Changes needed for utilization include: initialization of position
coordinates parameters for UE (which are needed to calculate propagation
delay between UE and SAT), propagation delay calculations and timing
advance adjusts. Moreover, this change removes the now unused arguments
for ntn_koffset, ntn_ta_common and ntn_ta_commondrift
/opt/oai-gnb/bin/nr-softmodem -O /opt/oai-gnb/etc/gnb.conf --sa --log_config.global_log_options level,nocolor,time --rfsimulator.options chanmod --telnetsrv --telnetsrv.listenaddr 192.168.71.150 --telnetsrv.shrmod ci
=================================================================
==7==ERROR: AddressSanitizer: odr-violation (0x7fce78b85be0):
[1] size=4 'log_mem_write_side' /oai-ran/common/utils/LOG/log.c:78:14
[2] size=4 'log_mem_write_side' /oai-ran/common/utils/LOG/log.c:78:14
These globals were registered at these points:
[1]:
\#0 0x7fce7b691658 in __asan_register_globals ../../../../src/libsanitizer/asan/asan_globals.cpp:341
\#1 0x7fce7bd0c47d in call_init elf/dl-init.c:70
[2]:
\#0 0x7fce7b691658 in __asan_register_globals ../../../../src/libsanitizer/asan/asan_globals.cpp:341
\#1 0x7fce7a5e2eba in call_init ../csu/libc-start.c:145
\#2 0x7fce7a5e2eba in __libc_start_main_impl ../csu/libc-start.c:379
==7==HINT: if you don't care about these errors you may set ASAN_OPTIONS=detect_odr_violation=0
SUMMARY: AddressSanitizer: odr-violation: global 'log_mem_write_side' at /oai-ran/common/utils/LOG/log.c:78:14
==7==ABORTING
[INFO tini (1)] Spawned child process '/opt/oai-gnb/bin/entrypoint.sh' with pid '7'
[INFO tini (1)] Main child exited normally (with status '1')
* trigger re-establshemnt on DU: reset RLC counters on DRB 1
for OAI UE, since SRB 1 does not work for lack of periodic
measurements reports
* how is the re-establishment triggered?
* a transmission on DRB 1 occurs
* detection of a mismatch of RLC counters at the UE side
* max number of RLC retransmissions reached
* RLF detection
* verify re-establishment on CU: we ping the core from the UE; this
sends packets on DRB, and because the sequence number mismatches, will
trigger a reestablishment. We accept in the ping that a couple of
packets might be lost; after ping is over, reestablishment must be
done as well (else the ping will already fail).
Set SA mode as default
- Set standalone (SA) mode as the default.
- Adjust commands in Docker Compose files by removing --sa flags and
adding --nsa flags where applicable.
- Add a function to verify that only one mode is being used at a time.
- Update all relevant documentation.
See e.g., egrep(1) [https://linux.die.net/man/1/egrep]:
> two variant programs egrep and fgrep are available. egrep is the same
> as grep -E. fgrep is the same as grep -F. Direct invocation as either
> egrep or fgrep is deprecated
See also the rationale of the POSIX description of grep
(https://pubs.opengroup.org/onlinepubs/9699919799/utilities/grep.html):
> This grep has been enhanced in an upwards-compatible way to provide
> the exact functionality of the historical egrep and fgrep commands as
> well. It was the clear intention of the standard developers to
> consolidate the three greps into a single command.
Closes: #839
This commit adds yaml-cpp library to required docker images and build commands. There is one workaround
in cross-compilation for apt behavior for installing libyaml-cpp-dev. Apt will uninistall previous
versions of the package whenever another one is installed. This means that installing the arm version
breaks amd version and vice versa. This makes it impossible to have both libs installed at the same
time which is required by the cross-compilation build command (it calls cmake twice, once with native
and once with target architecture)
Updated links to latest available L1 documentation
Removal of unneeded environment variable in aerial_l1_entrypoint.sh
Removal of unneeded checkout command from doc
Reword Aerial Entrypoint script paragraph to separate in multiple sentences
New UE has been tested with Aerial setup
Change bash blocks to reflect that cuBB container no longer uses root
Add alternative instructions to obtain nvipc sources from container
Add note in Prepare the L1 image section specifying default config file and location
Co-Authored by: Reem Bahsoun <reem.bahsoun@openairinterface.org>
Create directories for gNB deployment with VVDN and Benetel550 RUs.
Each directory includes scripts for setting up and cleaning up the
host machine running the gNB.
address sanitizer fails with this error upon starting the DU:
==7==ERROR: AddressSanitizer: odr-violation (0x7f8ed2594a00):
[1] size=4 'log_mem_write_side' /oai-ran/common/utils/LOG/log.c:78:14
[2] size=4 'log_mem_write_side' /oai-ran/common/utils/LOG/log.c:78:14
These globals were registered at these points:
[1]:
#0 0x7f8ed5092658 in __asan_register_globals ../../../../src/libsanitizer/asan/asan_globals.cpp:341
#1 0x7f8ed570d47d in call_init elf/dl-init.c:70
[2]:
#0 0x7f8ed5092658 in __asan_register_globals ../../../../src/libsanitizer/asan/asan_globals.cpp:341
#1 0x7f8ed3fe3eba in call_init ../csu/libc-start.c:145
#2 0x7f8ed3fe3eba in __libc_start_main_impl ../csu/libc-start.c:379
==7==HINT: if you don't care about these errors you may set ASAN_OPTIONS=detect_odr_violation=0
SUMMARY: AddressSanitizer: odr-violation: global 'log_mem_write_side' at /oai-ran/common/utils/LOG/log.c:78:14
So we do as suggested and disable ODR violations to make the test pass.
A proper solution would be to link this function only once.
This updates all images in the CI to Ubuntu 22. It also updates
corresponding documentation. Remove python(2) from the image, as it is
not needed. Update documentation.
It seems that the gcc coming in Ubuntu 22 does not like
stack-protector-strong, so remove it as well.
Since we compile Flexric, which does not support Ubuntu 22's default
gcc-11 (it hits a compile bug), switch to gcc-12 manually.
Since we update the compiler, we also need to be careful to use the right
address sanitizer version (which is bundled with the compiler version).
To avoid a reinstallation of the wrong asan version in target images, we
modify Ubuntu 22 targets to copy libasan from the base image. This is necessary
since we use update-alternative in the base image, but we don't want to
install compilers in the target images to use update-alternatives to
install the right asan version... This should be undone when switching
to Ubuntu 24 in the future, as it will have a newer default gcc version,
such that we don't need to update the compile in the first place.
Upgrade libpython in lteUE for U22 upgrade to make it compatible with
UHD.
* IP address of VNF shall be aerial1's one
* scripts within cubb container shall be run with sudo now
Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>
Robert Schmidt