With value 4 when connecting one UE and doing some downlink
iperf TCP there is a crash. Probably due to the multiple wrong
RA detected leading to uplink failure of fake UE that never
sends Msg3 (because, well, there is no other UE).
This is another problem that will be fixed at some point.
Anyway, this value 4 fails. Let's put back 3.
Doing airplane mode off to connect a cots UE followed by airplane mode on
to disconnect it gives very bad results (bad disconnection with lots of
UL failures followed by lots of logs in the eNB). It used to work properly
after the work done by Xu Bo.
It turns out that in 2018.w04 things were still working okay. But
in 2018.w05 no.
So I ran:
git diff 2018.w04 2018.w05
And I checked all the modifications that I thought were relevant
(everything related to the UE, oaisim, if4 and fapi has not been checked).
This commits takes back the version of 2018.w04.
The modifications in openair2/RRC/LITE/rrc_eNB.c are necessary, I think.
The other modifications may not be necessary or even wrong. To be checked
at some point.
This commit fixes issues introduced by the previous commit.
Summary of work:
- cleanup:
- fix LOG_XX to be less verbose
- fix cmake_targets/CMakeLists.txt
- fix oaienv
- remove dead code
- bug fixes:
- in openair1/SCHED/fapi_l1.c we had:
eNB->pdcch_vars[subframe&1].num_dci = number_dci;
should be:
eNB->pdcch_vars[subframe&1].num_dci = 0;
This bug let the PHY send more DCIs than what should have been
sent because num_dci is incremented later on in the code.
This fix may be a problem for fapi mode, to be checked.
- add new T VCD traces
- revert openair1/PHY/TOOLS/file_output.c to 'develop' version
- remove thread_id in logRecord/logRecord_mt
- revert (and adapt) configuration files
- be careful when doing frame++, we need to % 1024
- revert target_rx_power in openair2/LAYER2/MAC/eNB_scheduler_ulsch.c
- NFAPI:
- the open-nFAPI code has been included in the repository. See nfapi/README.
Maybe we should "git clone" the Cisco repository instead. We have to be
careful of availability though.
What has been tested:
- monolithic eNB FDD 5/10MHz with one UE, iperf UDP/TCP uplink/downlink
Anything else may fail to work, especially the FAPI mode, which has not
been tested at all.
It has been chosen to not include the full history of commits
from David. He included a binary version of wireshark, probably
a modified one that understands NFAPI. Wireshark is released under
the GPL license, we cannot include it in the repository. We could
have done a next commit to remove this binary. But then it would
still be present in the history of commits, which may not be allowed.
And it would take space on disk. We could edit the history to remove
wireshark entirely. But this operation is too complicated.
There was also a pcap capture file, which has nothing to do in
the history of commits and would take space on disk. There again,
it's too difficult to edit the history to remove it.
There was a file .gitignore that was also removed.
The original history can be found on David's repository:
https://gitlab.eurecom.fr/daveprice/openairinterface5g/
The branch is: nfapi-ru-rau-split.
A copy of that branch has been included in the internal OAI
repository, for those who have access to it.
The branch is the same. The last commit ID is
9106438239e0bc626ff1fa1d97d911caadd0fbb9.
You can compare the current commit with the commit 9106...
to see what differs.
The current commit has to be considered non-working.
The commit following the current commit will fix problems with
the work in the current commit.
If you use git bisect, don't spend time analyzing the current
commit.
Includes the following updates:
1. oaisim/lte-softmodem in noS1
2. UE fixes for oaisim
3. IF4p5 fixes (doesn't work on develop)
4. UE fixes for DCI handling (corrects problem introduced in develop)
Conflicts:
cmake_targets/CMakeLists.txt
targets/SIMU/USER/oaisim_functions.c
Florian Kaltenberger