NR gNB MSG3 TPC
This MR improves the handling of MSG3 TPC commands at MAC gNB.
TODO: Compute TPC when PRACH sends a valid power measurements (currently
not the case for OAI L1, to be verified with Aerial L1)
Closes#866
NR gNB improvements for analog beam management
- Improvements at gNB MAC layer to properly handle analog beam
management for all channels
- Simple beam switching mechanism based on UE RSRP report
The parent commit cleans up and groups oai_exit in one place,
nr-softmodem-common.h. Therefore, this 5G file is included in the 4G
defs_common.h (at least it's mostly 4G), which is not nice. Instead,
define oai_exit also in 4G softmodem-common.h, and include this in
defs_common.h. Remove the cyclic inclusion of defs_common.h in
softmodem-common.h, and resolve all subsequent errors around unknown
types and extern definition mismatches.
Add support for O1 in O-DU via telnet
This change set adds a simple telnet interface to nr-softmodem. Together
with oai/o1-adapter>, this implements a part of the O1 interface, for
the DU only. Currently supported uses cases:
- some stats are send to an SMO (such as bandwidth, PLMN, frequency, ...)
- re-configuration of bandwidth, frequency
- stop/start of the softmodem, while keeping the CU and L2 running
- the o1-adapter implements two alarms, load overload and base station
offline, using this interface.
It is possible to use the telnet interface by itself (i.e., "o1" without
the o1-adapter). To do this, compile with telnet support (./build_oai
--build-lib telnetsrv) and start the nr-softmodem with O1 module
(./nr-softmodem --telnetsrv --telnetsrv.shrmod o1). You can then do the
following:
- see some statistics as exposed to o1-adapter, in JSON: echo o1 stats | nc 127.0.0.1 9090 && echo
- stop the L1: echo o1 stop_modem | nc 127.0.0.1 9090 && echo
- reconfigure bandwidth: e.g., echo o1 bwconfig 20 | nc 127.0.0.1 9090 && echo (also supported: 40, 60, 100)
- start the L1: echo o1 start_modem | nc 127.0.0.1 9090 && echo
Note that the reconfiguration works with split-8 radios. Notably, it
does not work yet out-of-the-box with 7.2 radios, because they have to
be manually reconfigured on bandwith/frequency switch. The planned
M-plane should allow such use case, though.
To help with the above, this branch also includes fixes (for more
information, refer to the corresponding commits):
- fixes for stopping the L1, notably stop threads in right order, stop
thread pool of RU
- collect some general MAC metrics, fix some bugs in MAC
- fix problems in F1AP gNB-DU configuration update message, update test
- fix some problems in RRC
The consumer of this function just passes a pointer to something to be
sent. This function should not free this memory, it's simply not it's
task. This is the same bug as above in
"CU_handle_gNB_DU_CONFIGURATION_UPDATE(): don't free the message of RRC"
SIB19 utilization on UE
Following SIB19 initialization and scheduling on gNB (!2899 - merged)
and Receive SIB19 on nrUE (!2920 - merged), this merge request aims to
introduce the actual use of the SIB19 provided parameters by gNB in UE.
Changes needed for utilization include: initialization of position
coordinates parameters for UE (which are needed to calculate propagation
delay between UE and SAT), propagation delay calculations and timing
advance adjusts. Moreover, this change removes the now unused arguments
for ntn_koffset, ntn_ta_common and ntn_ta_commondrift
GTP: use direct call instead of ITTI
Using ITTI calls for user plane implies (1) a memory allocation, (2)
mutexes, and (3) queueing messages for each user plane packet, which is
heavy. Use a direct API call instead to reduce overhead.
- Removed ntn_koffset, ntn_ta_common, ntn_ta_commondrift arguments in order to be used directly from SIB19
- Removed global NTN_UE_Koffset variable and it's use
- Introduced getter functions for ntn related parameters
- Added new structure to hold timing advance parameters
- Made SIB19 related calculation to save to this struct
- Modified in ra to get ta struct values
remove un-necessary global variables
Remove global variables that can be removed by a trivial way:
- simply dead globals
- or reference is a single source, so can be static
setting them static reduces the scope, that is a progress, but of course as
for all static variables, the code is still not re-entrant
T tracer: add macpdu traces for the NR UE
MIB, SIB1, random access and regular scheduling are traced.
At the beginning of a connection (rrc setup request and rrc setup), the
RNTI is reported as 0. Might be fixed, somehow, if absolutely needed (not
sure).
- removed some whitespace noise.
- cleaned up CMakeLists.txt
- reintegrated task_manager.c into thread-pool.c
- cleaned up some unnecessary code
Co-authored-by: Cedric Roux <cedric.roux@eurecom.fr>
Co-authored-by: Mikel Irazabal <mikel.irazabal@openairinterface.com>
MIB, SIB1, random access and regular scheduling are traced.
At the beginning of a connection (rrc setup request and rrc setup), the
RNTI is reported as 0. Might be fixed, somehow, if absolutely needed (not
sure).
FAPI P7 Refactoring and unitary test creation
This MR is a follow-up to the work done in !2714 this time separating
the P7 FAPI messages into its own library (nr_fapi_p7).
In the same way, utility functions to copy, free and compare have been
added for each message, as well as an addition function to get the
allocated size for a message, which is used for the messages that can be
too big to fit in a buffer that's allocated in the stack.
Unitary tests have been added for each of the messages, testing
pack/unpack and the utility functions added.
Renames nfapi_nr_srs_reported_symbol_t prgs into *reported_symbol_list for two reasons:
So that the name is more representative of what the parameter represents.
For it to actually be a list, and not assume only 1 reported symbol is used.
Allocate reported_symbol_list in unpack_nr_srs_beamforming_report.
Updated all references to prior prgs to point to the first position of reported_symbol_list, still only effectively using the first reported_symbol.
Rename fill_srs_reported_symbol_list into fill_srs_reported_symbol and update input parameter name, since it only fills the information related to one reported symbol
NR MSG3 scheduling improvements
- fix wrong condition on MSG3 allocation assertion message
- remove assertion altogether and handle properly the case where MSG3
can't be allocated
Robert Schmidt