NR UE: fix PRACH generation with frequency resource id not 0 when msg1-FDM > 1 in SIB1
When msg1-FDM > 1 (2, 4 or 8) in SIB1, the frequency resource id of
PRACH could be not 0, current PRACH generation only considers frequency
resource id = 0. This MR fixes it, verified with 3rd-party gNB.
Closes#939
RedCap InitialBWP
Prevent RedCap UEs to move to DedicatedBWP
This allows the coexistence of RedCap UEs and non-RedCap UEs in the
same cell by having an InitialBWP with 20MHz and a larger
DedicatedBWP.
Update example RedCap configuration file to have 20 MHz InitialBWP and
40 MHz DedicatedBWP
esp. for LEO NTN scenarios the timing drifts during initial sync, which is mostly compensated with --ntn-initial-time-drift.
But there might be a residual time offset, and by extending the peak search window we make this more tolerant.
Depending on the main source of frequency offset, pre-compensate the UL frequency offset (FO) accordingly.
Therefore modify the flag `--cont-fo-comp` to accept an integer value, where
- `1` specifies, that the main FO contribution comes from the accuracy of the local oscillator (LO)
- `2` specifies, that the main FO contribution comes from Doppler shift
This commit introduces support for concurrent UL slot processing
Key changes:
- Increased number of UL actors from 1 to 2
- fix several issues related to writing to global variables inside
processSlotTX
- Ensure in-order execution of if_module calls by utilizing the
preexisting dynamic_barrier structure.
Encapsulate the asn1c call from cmake in a cmake function run_asn1c().
As a notable change to the previous manual add_custom_command()
invocation, in suppresses the output of asn1c by default [1] and stores
it in a log file. In case of asn1c4 error, the output will output on
stdout.
Use the new run_asn1c() in all occasions for code generation.
[1] it is quite verbose, with many warnings that we cannot influence nor
suppress, and lists all generated files which is verified by the build
system automatically, anyway.
- Update the L1 (cuBB) version in the docker-compose.yaml
- Change the argument for the L1 config file (cuphycontroller.yaml) in the aerial_l1_entrypoint.sh
- Update the N2 and N3 IP addresses to match the Grace Hopper's in the gnb.conf.
- Remove the test XML file for pulling images in the ARM image builder.
- Update the Aerial XML file to pull ARM images.
- Decrease tested throughput (temporarily) due to problems with Foxconn RU
Integration: `2025.w14` (part 2)
See merge request oai/openairinterface5g!3362
* !3255 Fixes for E1 and PDU session usage
* !3332 sched_ctrlCommon earlier
* !3356 Avoid accessing current_DL_BWP structure when scheduling DCI for other SIBs
* !3359 Fix inconsistent maxnoofPDUSessions definitions between NGAP and platform constants
* !3357 CI: update VVDN configuration file
* !3333 NR RLC improvements
* !3342 Fix bugs detected gcc
* !3347 feat(oran_fhlib_5g): O-RAN 7.2 FrontHaul Interface on Arm
* !3153 [E2 agent] RAN Control SM - support for REPORT Style 1 ("RRC Message" and "UE ID" RAN Parameter IDs)
* !3234 CI: minor tunings and improvements
* !3276 Optimization for unused symbols in NR UE
* !3317 Extend F1 Handover test
Extend F1 Handover test
do 1 more handover in the same test to verify robustness
- This MR keeps a simple ping after the second handover since there are
still issues due to scheduling starting too early, that is as soon as
the UE context is added. This leads to retransmissions that could
eventually lead to a test failure. The issue will be fixed in a future
MR.
add check on connected DU to verify successful handover
- a new telnet function gets in input the UE ID and returns the ID of
the connected DU
wait some time after deploying DU to mimic time for measurements
Optimization for unused symbols in NR UE
After processing TX frequency domain data skip IFFT call for symbols
that aren't used, the time domain buffer is memset instead.
Biggest benefit is when UE does not transmit PUSCH, or PUSCH is using <
14 symbols
[E2 agent] RAN Control SM - support for REPORT Style 1 ("RRC Message" and "UE ID" RAN Parameter IDs)
[Spring of Code 2024] contributions
Extended the RAN Control Service Model at E2 Agent to support all RC
REPORT Styles (1 - 5)
Implemented the following RAN Parameter IDs for REPORT Style 1:
1. "RRC Message": any DL-DCCH, and any UL-DCCH
2. "UE ID": as per spec, when the RRC Setup Complete or F1 UE Context
Setup Request detected
feat(oran_fhlib_5g): O-RAN 7.2 FrontHaul Interface on Arm
This MR is enabling the 7.2 FHI on Arm systems.
Even though the performance are yet very bad (UE connection is very
difficult, 100Mbps DL, almost no UL), still I would like to merge this
now since the matter of making the FHI work is rather orthogonal to the
performance issues.
So merging this feature would provide a reliable settlement on top of
which we could then progressively enhance the porting of OAI to Arm.
Especially that would make our work easier by having less features to
rebase regularly on develop.
The main features this MR is made of are:
1. Make the xran patches dual
We provide patches for both E and F releases of xran that handles x86
targets as well as Arm targets. Both patches have been tested on both
types of machines (armix, broadbill). Thanks to @brobert and @changy
for their work on xran.
2. Perform 9-bits BFP compression with ArmRAL
Since the BFP compression implementation provided with xran does rely
heavily on AVX512, we provide an alternative implementation that is
relying on Arm's RAN Acceleration Library (ArmRAL).
As of writing this commit description, only 9-bits compression is
supported. Other IQ width will be added.
This upcoming change does not prevent review to be performed since the
BFP compression functions of ArmRAL are identical except for the IQ
width. Adding further IQ width is therefore very straightforward.
3. Fixes in oran_fhlib_5g to support Arm
The library oran_fhlib_5g needed few changes to successfully compile and
run on Arm systems. Thanks to @brobert for his work on oran_fhlib_5g.
Fix inconsistent maxnoofPDUSessions definitions between NGAP and platform constants
There are 2 different definition of maxnoofPDUSessions (as per 3GPP TS
38.413), one in NGAP lib (set to 16) and one in platform_constants.h
(256 as per specs). The NGAP lib definition is removed in this commit
and replaced by the one compliant with the specs.
This is fixing the warning:
In function 'fill_pdu_session_resource_failed_to_setup_item',
inlined from 'rrc_gNB_send_NGAP_INITIAL_CONTEXT_SETUP_RESP' at /openair2/RRC/NR/rrc_gNB_NGAP.c:588:7:
/openair2/RRC/NR/rrc_gNB_NGAP.c:451:12: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
451 | f->cause = cause;
| ~~~~~~~~~^~~~~~~
In file included from /common/utils/ocp_itti/intertask_interface.h:235,
from /openair2/RRC/NR/rrc_gNB_NGAP.h:39,
from /openair2/RRC/NR/rrc_gNB_NGAP.c:31:
/openair2/COMMON/ngap_messages_types.h: In function 'rrc_gNB_send_NGAP_INITIAL_CONTEXT_SETUP_RESP':
/openair2/COMMON/ngap_messages_types.h:546:13: note: at offset [8724, 25769812488] into destination object 'gNB_ue_ngap_id' of size 4
546 | uint32_t gNB_ue_ngap_id;
| ^~~~~~~~~~~~~~
Avoid accessing current_DL_BWP structure when scheduling DCI for other SIBs
Avoid access to mac->current_DL_BWP structure when scheduling DCI for
SIBs other than 1. This is not needed and can cause NULL pointer access
which can happen if the UE has released MAC configuration or has not
started RA yet.
Robert Schmidt