Seems like the UEs in the CI don't like when asked to report NR UE
capabilities. So let's first ask for eutra capabilities and then
dig into them to check for en-dc support and only then ask for
NR capabilities. We chose to ask for NR capabilities after receiving
RRCConnectionReconfigurationComplete. That may not be the best thing
to do.
Today, we do nothing with those capabilities. We could completely skip
asking them to the UE, but since the code is there and since it may be
useful in the future, let's do it. Hopefully, it should not hurt too much.
- physical simulators
- LTE eNB
- LTE UE
- 5G-NR gNB
Still NR-UE does not build and eNB segs fault at start of program
Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>
-On the fligh MBMS recofiguration for MBSFN, sib13,sib2 and MCCH enabled through M2 interface (MCE)
-RRC NAS update for MBMS TUN interfaces configuration
-UE RRC modified to handle dynamic SIB2 (MBSFN Subframe Config Lists), SIB13 (MCCH) reconfigurations (TO CAREFULLY BE CHECKED)
ACKNOWLEDGEMENT:
1. This commit was developed at Vicomtech (https://www.vicomtech.org) under UE project CDN-X-ALL: "CDN edge-cloud computing for efficient cache and reliable streaming aCROSS Aggregated unicast-multicast LinkS"
2. Project funded by Fed4FIRE+ OC5 (https://www.fed4fire.eu)
Signed-off-by: Javier Morgade <javier.morgade@ieee.org>
With the introduction of X2AP into develop, the UEs now have to regularly
send measurement reports.
In the logs of the eNB, we see:
[OSA] Mismatch found in integrity for algorithm 2,
got e0.a0.c2.66, expecting a5.9c.cb.57
[PDCP] [OSA][RB 1] eNB failed to validate MAC-I of incoming PDU
This is a bug in the PDCP layer that uses wrong parameters to compute the
integrity.
This commit fixes this bug.
The function pdcp_is_rx_seq_number_valid was removed. Its processing
has been directly integrated into the function pdcp_data_ind.
The function pdcp_mark_current_pdu_as_received is not called anymore.
Its processing was not used later on, so as of today, not calling it does
not introduce any functional change.
The function pdcp_validate_security takes now as parameters both
SN and HFN. Same for the function pdcp_get_next_count_rx.
Useless constants PDCP_SN_5BIT, PDCP_SN_7BIT and PDCP_SN_12BIT have been
removed.
The compilation option ENABLE_SECURITY has been removed. It's now always
on. (This may impact some use cases.)
The PDCP for DRB using RLC AM is not correct. It was not correct before
this commit (apart from the integrity bug). We should deal with a list
of PDUs and transmit packets to upper layers as detailed in the specs.
Today we transmit the PDU as soon as we get it. We don't care about
duplicates, in-order delivery, timeouts.
Also, we don't deal with "PDCP re-establishment". Not sure how that impacts
the software.
And, last but not least, there is still no ROHC.
Raymond Knopp