* strdup() function is returning a malloced string
which must be freed after use
* replace the strdup with direct use of strings to avoid heap allocation
> Direct leak of 23 byte(s) in 1 object(s) allocated from:
> 0 0x7ffff745b9a7 in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:454
> 1 0x555559e36f87 in RCconfig_nr_parallel /openair2/GNB_APP/gnb_config.c:2054
> 2 0x555559e38ea3 in NRRCConfig /openair2/GNB_APP/gnb_config.c:2097
> 3 0x555559155542 in get_options /executables/nr-softmodem.c:423
> 4 0x555559155542 in main /executables/nr-softmodem.c:623
> 5 0x7ffff5e29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
> Direct leak of 14 byte(s) in 1 object(s) allocated from:
> 0 0x7ffff745b9a7 in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:454
> 1 0x555559e370c5 in RCconfig_nr_parallel /openair2/GNB_APP/gnb_config.c:2063
> 2 0x555559e38ea3 in NRRCConfig /openair2/GNB_APP/gnb_config.c:2097
> 3 0x555559155542 in get_options /executables/nr-softmodem.c:423
> 4 0x555559155542 in main /executables/nr-softmodem.c:623
> 5 0x7ffff5e29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
- num DL/UL harq processes, bits for harq id in DCIs, set according to IEs configured in RRC messages
- removed going through all the harq processes before triggering nr_ue_ulsch_procedures in phy_procedures_nr_ue.c
- did not remove usage of MAX_HARQ_PROCESSES in init phase
- Enabled configuration for number of dl, ul harq processes in conf file
- set "num_dlharq = 32; num_ulharq = 32;" under "gNBs" section in the conf file
- default values when not configured is 16 for DL, UL harq processes
- IEs in the RRC messages set according to the number of DL, UL harq processes configured.
- If value 32 is configured , then IEs related to num harq processes and dci bits also configured in Bandwidth parts.
- MAX HARQ PROCESSES set to 32
- for PDSCH - default setting in OAI is 16, according to 3GPP rel17 38.331 these are the possible configs
- if no IES are defined then 8
- if nrofHARQ-ProcessesForPDSCH is defined then these values- {n2, n4, n6, n10, n12, n16}
- if nrofHARQ-ProcessesForPDSCH-v1700 is defined then 32
- for harq bits in DCI
- DCI 1_0 - 4 bits spec 38.212, section 7.3.1.2.1
- DCI 1_1 - 4/5 bits according to IE harq-ProcessNumberSizeDCI-1-1, spec 38.212, section 7.3.1.2.2
- for PUSCH - default setting in OAI is 16, according to 3GPP rel17 38.331 these are possible configs
- if no IES are defined then 16
- if nrofHARQ-ProcessesForPUSCH-v1700 is defined then 32
- for harq bits in DCI
- DCI 0_0 - 4 bits spec 38.212, section 7.3.1.1.1
- DCI 0_1 - 4/5 bits according to IE harq-ProcessNumberSizeDCI-0-1, spec 38.212, section 7.3.1.1.2
- FOR HARQ32 , DCI 1_1, DCI 0_1 should be configured in UE dedicated search space. In OAI it is set.
Integration: `2024.w31`
See merge request oai/openairinterface5g!2894
* !2812 NR UE MAC PRACH scheduling fixes
* !2885 Fix signal_energy_nodc for lengths that are not multiples of 4
* !2888 nr rlc: fix decode_poll_byte()
* !2892 Dockerfiles: correct ENV format
* !2891 UE cmd line info: print threequarter-sampling param if used
* !2837 replacing assertions with LOG_E in UE UL locking mechanism
* !2879 style(docker): newer versions of docker require keyword as to be of same case as from
* !2832 Enable PHR reporting for NR UE
* !2880 CI: Improve error handling in Iperf3 JSON analysis functions
* !2813 Rewrite time_stats_t counters for DLSCH in NR UE.
* !2882 Automatic scaling to PUCCH2 receiver
* !2691 NR UE data inactivity timer
* !2848 Refactor network interface handling
* !2865 CI: Create FHI 7.2 pipeline
- Modify CN deployment and termination functions to include namespace and path parameters.
- Update `Module_UE` class with new attributes for namespace and CN path.
- Integrate `cnID` for OC CN deployment and termination in `epc.py`.
- Extract `cn_id` from XML configurations for CN operations.
- Update XML files to include `cn_id` tag for 5G Core initialization and
termination. (Used in OAIUE and AW2S pipeline, for OC CN deployment. This change
will not affect other CN deployments.)
Create directories for gNB deployment with VVDN and Benetel550 RUs.
Each directory includes scripts for setting up and cleaning up the
host machine running the gNB.
Handle IPv6 (and IPv4v6) PDU sessions by correctly instructing
nas_config() to set up the interface with provided IP addresses.
Note that as of now, IPv6 PDU sessions have not been fully tested.
Remove a useless assert at the gNB; to my understanding the gNB does not
care about the IP session type (at least for IP), as it just
transparently tunnels the IP packets from/to GTP.
I added a comment in the code where to change to request a PDU session
different from IPv4. Currently it is hardcoded to IPv4, and it seems
that a default OAI 5GC config would reject a PDU session type different
from IPv4.
- Read interface flags before setting status to not inadvertently
overwrite existing flags
- Set interface flag point-to-point, remove multicast (I think a UE is
not supposed to send anywhere else than to the UPF, so it seems to not
make sense to declare the interface as multicast)
These rules & route are necessary to properly send packets on oaitun_ue1
interface:
1. This forces the packets coming from a subnet different than the UE's
subnet to go back through oaitun_ue1 rather than via what the default
route defined on the system (e.g., important if ping from the
internet arrives).
2. On machines setting net.ipv4.conf.oaitun_ue1.rp_filter=1 (e.g.
RHEL), this prevents that source filtering for packets coming back is
applied and those packets be dropped. By default, many hosts have
rp_filter=2, so no strict source filtering is applied, and it would
work; on others, this rule prevents source filter dropping.
Prior to this commit, there was a global variable baseNetAddress that
could be set independently through a setter and also through the
configuration module. This baseNetAddress (16 bits IPv4) would then be
complemented with two more bytes in nas_config().
However, this is counter-productive, as not only we have a global
variable that is avoidable (we can give the entire address to
nas_config() directly), but it also would not work with IPv6. Hence,
modify to give nas_config() the entire address. A follow-up commit will
add IPv6 support.
- refactor functions to make them shorter
- provide doxygen strings
- open socket for operation once instead of in each function
- use named constant (from enum) to differentiate interface UP/DOWN
- Linux kernel defines name length as IFNAM_SIZE, so use that for
interface name length. Also, it seems no null-byte is needed.
I initially planned to entirely remove the netmask configuration.
However, in specific configurations, e.g. in 4G Rfsim with feMBMS,
routing does not seem to work anymore using these commands:
iperf -B 10.0.2.2 -s -u -i1
iperf -c 10.0.2.2 -B 10.0.2.1 -u -t 30 -b 2.00M -i1
Therefore, we simplify by hardcoding the netmask to /24, which allows
the above to work.
Remove the broadcast address from the UE, as logically, a UE has nothing
to broadcast: it can only directly talk to the core. Additionally, at
least as of now, the UE interface is shown as "POINTOPOINT", so
broadcasting is not possible.
Does the same change in the _mbms() functions as in the previous commit.
Also, simplify logic in netlink_init_mbms_tun(): directly use the id in
the interface. This requires a slight ID change in the users, which is
also done in this commit.
Instead of implicitly using a hardcoded prefix "oaitun_" interface
name, move that out to the callers of these functions to make it clear.
The ID still remains outside.
The "sister functions" nas_config_mbms()/netlink_init_tun_mbms() will do
the same change in the next commit.
Comparing both functions, it seems that nas_config_mbms_s1() sets the
same parameters, assuming that in nas_config_mbms(), we set
- (UE_NAS_USE_TUN || ENB_NAS_USE_TUN) yielding true -> should yield the
same interface name
- netmask is hardcoded to 255.255.255.0
- baseNetAddress is hardcoded 10.0
So replace the call with nas_config_mbms() by setting parameters
accordingly.
francescomani