Workaround for handling 2 SS0 occasions per slot
Search Space 0 monitoring might depend on SSB. In !3332 this dependence
was removed by moving the configuration of SS0 earlier in a workaround
to avoid a segfault in handover. Now, a new workaround is needed to
handle 2 search space occasions per slot.
Fix PDSCH rate-matching for periodic CSI in UE
Changed the search structure to have periodic resoruce id in the outer
loop and configured resource set as inner loop to prevent configuring
resource that is not needed.
Use const for input pointers.
Changed the search structure to have periodic resoruce id in the outer
loop and configured resource set as inner loop to prevent configuring
resource that is not needed.
Use const for input pointers.
Add a CU-UP load tester and improve GTP performance
This adds a simple tester program for the CU-UP. It sets up a number of
UEs/bearers in the CU-UP via the E1 interface, then streams data in
downlink/uplink (as seen by the CU-UP). More information is available in
tests/nr-cuup/README.md.
Includes some fixes to properly verify that SCTP is installed, and use
"the right cmake way" to use it in cmake code (see commit for details).
simplify and make more local variables in nr_rx_pdcch() and fix small bugs...
simplify and make more local variables in nr_rx_pdcch() and fix small bugs
(size 9 RE instaed of 12 RE)
numelt in place of config_isparamset
config_isparamset doesn't seem to work for array types, a temporary solution is
using numelt to verify if the parameter is set in config file
The boolean value v17_sib was not set to true when allocating si_schedulingInfo_v17 and schedulingInfo2_r17.
So multiple Rel-17 SIBs would lead to multiple allocations and only the last SIB being actually configured.
Fix this by removing the redundant v17_sib variable and directly check if the memory was already allocated.
Also move the definition and allocation of si_schedulingInfo_v17 closer to its actual usage.
Fix Dedicated BWPs
- Improve SearchSpace selection
- Improve CORESET selection
- Fix fill 'initialDownlinkBWP->pdsch_Config' when there are
DedicatedBWPs
* This fixes the reported 'RSRP = 0' issue when the UE is in the
InitialBWP and we have DedicatedBWPs configured
- Add a 'common' type SearchSpace in the NR_BWP_DownlinkDedicated IE for
DedicatedBWPs
- Fix hardcoded 'controlResourceSetId' by making it dynamic
- Remove 'searchspaceid' from 'verify_agg_levels' function because it
was used only for LOG
- CI: Add DedicatedBWP to '40 MHz TDD F1+E1 SA' in
'RAN-SA-B200-Module-SABOX-Container'
Fix overflow when negating minimum int16_t value in precoding
This closes#955
It prevents undefined behavior caused by the minimum int16_t value
(-32768) in two's complement representation. Because possible negation
by multiplying with -1 during precoding cause an overflows since +32768
cannot be represented in 16-bit signed integers and end up again in
-32768 because of overflow, here reveald by using the SIMD functions.
Workaround we use a slightly smaller number than 1 in Q15 Format to
prevent this error. Q15 representation of (integer value -32767) -1 +
2^-15 = -0.999969482421875
remove specific directory for LTE SIM management tools
This is very old code has never been integrated with the "main" OAI
cmake infrastructure and more recent libraries.
This MR integrates the three binaries for LTE virtual sim management in
the regular build process and log system
Remove --usim-test command line option
Remove the --usim-test option: to my knowledge, it's not used by users,
and is misleadingly placed in various places where there should not be a
difference w.r.t. USIM configuration.
When making the changes, I assumed that --usim-test would be 0 (the
default), which is the case in all executables when not specified in
options except for the nr_dlsim, nr_pbchsmi, nr_ulsim simulators.
The only exception is the initialization of PDCP from the MAC, which
does not seem to be correct (the PDCP is in the CU, so it does not make
sense to call it from the MAC which is in the DU).
TS 38.213 4.1 says coreset 0 is present only if kssb < 24 for FR1 and <
12 for FR2. This commit sets get_sib1 flag based on kssb.
Also, setting of mac state is taken out of function nr_ue_decode_mib().
After RRCSetup, until RRCReconfigurationComplete, gNB continues to schedule ULSCH using DCIs in a common searchspace.
In theory, the UE should decode DCIs in:
<downlinkBWP-ToAddModList>
<BWP-Downlink>
<bwp-Common>
<pdcch-ConfigCommon>
<setup>
<commonSearchSpaceList>
...
</commonSearchSpaceList>
However, due to the limited amount of time to investigate this issue, the easy way I found to get DCIs decoded in common searchspace of a DedicatedBWP was by adding a common searchspace in the bwp-Dedicated:
<bwp-Dedicated>
<pdcch-Config>
<setup>
<searchSpacesToAddModList>
<SearchSpace>
...
</SearchSpace>
</searchSpacesToAddModList>
This way, let's call it a workaround.
There is a removal of the NR_SearchSpace__searchSpaceType_PR because, at this point, the gNB already selected the searchspace and it calls this function only to find the coreset with controlResourceSetId based on the previously searchspace id selected;
There is no need to send a pointer to the entire searchspace structure because we only need the controlResourceSetId: NR_ControlResourceSetId_t coreset_id = *ss->controlResourceSetId;
It also prevents a segmentation fault, in develop when NR_SearchSpace__searchSpaceType_PR_common because gNB calls sched_ctrl->coreset = get_coreset(nr_mac, scc, bwpd, sched_ctrl->search_space, target_ss); the bwpd is NR_BWP_DownlinkDedicated_t *bwpd = NULL; and is it incompatible with the cast to NR_BWP_Downlink_t in coreset = ((NR_BWP_Downlink_t*)bwp)->bwp_Common->pdcch_ConfigCommon->choice.setup->commonControlResourceSet; this was never noticed until now because gNB barely used NR_SearchSpace__searchSpaceType_PR_common
Remove the --usim-test option: to my knowledge, it's not used by users,
and is misleadingly placed in various places where there should not be a
difference w.r.t. USIM configuration.
When making the changes, I assumed that --usim-test would be 0 (the
default), which is the case in all executables when not specified in
options except for the nr_dlsim, nr_pbchsmi, nr_ulsim simulators.
The only exception is the initialization of PDCP from the MAC, which is
not correct (the PDCP is in the CU, so it does not make sense to call it
from the MAC which is in the DU). Instead, always initialize from main,
even in the NSA case (NSA was covered by the incorrect initialization
from MAC).
This in turn let to some more cleanup around function du_rlc_data_req().
After receiving GTP packets at the DU, they were given to the PDCP to
enqueue the packet at RLC. This does not work anymore, since the PDCP is
not initialized; it also does not seem necessary, as this enqueue
functionality is necessary to decouple PDCP and RLC to avoid deadlocks
in monolithic, but in split-mode, this cannot happen. Instead, call
directly into the RLC when receiving GTP packets.
bugfix: avoid segmentation fault when Redcap tries to connect to gNB
bugfix: avoid segmentation fault when Redcap tries to connect to gNB
as NR_ServingCellConfig_t scd is NULL when Redcap does RA
NR UE: Enable additional PDU session
- fix a bug with wraparound of buffer_remain_ep
- Add --extra-pdu-id command line option
Testing procedure:
1. Start cn in openairinterface5g/doc/tutorial_resources/oai-cn5g with
docker compose up
2. Start gnb:
sudo ./nr-softmodem -O ../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf --gNBs.[0].min_rxtxtime 6 --rfsim --rfsimulator.server_address server
3. Monitor extra interfaces being created:
watch -n 0.5 "ifconfig | grep tun"
4. Start UE:
sudo ./nr-uesoftmodem -C 3619200000 -r 106 --numerology 1 --ssb 516 --band 78 --rfsim --uicc0.imsi 001010000000001 --extra-pdu-id 11
5. An extra tun interface oaitun_ue1p11 should be created. Observe in
the terminal from step 3
6. Ping the core network from both interfaces, e.g., ping -I
oaitun_ue1p11 10.0.0.1, ping -I oaitun_ue1 10.0.0.1. This should
generate traffic on the gNB on different LCIDs.
Measurement gaps
Scheduling measurement gaps to provide sufficient time for the UE to
re-tune its transceiver to the target carrier, complete the set of
measurements and then re-tune its transceiver back to the original
carrier.
fix(RLC): Count dropped DL SDUs by the RLC
When a downlink SDU was discarded by the RLC Acknowledged Mode entity
due to a full transmit buffer (tx_maxsize), the drop statistics were not
being updated. The txpdu_dd_pkts and txpdu_dd_bytes counters remained at
0. It should be noted that while the statistics are named txpdu_dd_*,
the drop at this stage occurs at the SDU level.
speedup NR RLC RX for AM
rx_list is replaced by an array of size 2^(SN size - 1) which is 131072
for an SN size of 18 bits, leading to 1048576 bytes of memory used.
(Less for smaller SN sizes.)
A lot of RX processing was to run through rx_list. When the list was big
(with some non-ideal channel), it can take some time. Removing this list
should improve things. Checking with benchmark_nr_rlc_am_entity a
speedup of more thant x10 is achieved (except for the case 1024 which is
surprisingly faster than the others in the develop branch).
The only thing that may be slower is when looking for cur->next where
the SN is different, in which case we need to look for all SN one by one
until we find something or reach the limit (rx_highest_status). These
are the functions get_first_rx_pdu() and get_next_rx_pdu().
Add WLS as a transport option for VNF/PNF, refactor existing options
This MR adds a new transport mechanism for the VNF and PNF split, using
the Intel WLS library, which makes use of DPDK and shared memory to
transport messages. This transport mechanism is what is used to
interface with Radisys ODU, while also working with OAI VNF/PNF.
The VNF and PNF have been refactored so that the transport-specific
functions are isolated from the rest of the logic, and as such,
interchangeable by means of function pointers.
The same change is done for the packing/unpacking procedures, allowing
to switch between FAPI and nFAPI encoding.
This MR also reduces the amount of duplicated code, by refactoring the
VNF with Aerial, which now only has the transport-relevant functions, as
well as the ones that are unique to it ( for example, the unpacking
procedures where a secondary data buffer is used for the message
payloads )
Additionally a new callback is added to the VNF to process
ERROR.indication messages, which currently only indicates which message
originated the error, and which error occurred.
When a downlink SDU was discarded by the RLC Acknowledged Mode entity due to a full transmit buffer (tx_maxsize), the drop statistics were not being updated.
The `txpdu_dd_pkts` and `txpdu_dd_bytes` counters remained at 0.
It should be noted that while the statistics are named `txpdu_dd_*`, the drop at this stage occurs at the SDU level.
Robert Schmidt