Enable SSB-SINR based CSI reporting
3GPP 38.331 release 16 specifies that If the field reportQuantity-r16 is present,
UE shall ignore reportQuantity (without suffix). reportQuantity-r16 configures
SSB based SINR as the reporting quantity.
set do_SINR = 1; in gNB params part of the config file to enable SSB based SINR
reporting.
Cleanup and refactor initial gNB configuration
This is follow-up on !3048 (merged). Major changes in this MR:
- Add config functions to reduce redundant code repeated in multiple places in the file
- Add macros to reduce redundant code in gNB configuration
- Refactor RCconfig_NR_NG
- Cleanup obsolete and commented out code
- Refactor includes in executables/nr-gnb.c
- Introduce platform type plmn_id_t for consistency across the stack: F1AP, NGAP can now use the same struct type
- And other minor formatting
This commit refactors the TUN interface management by moving its creation
and configuration from the PDCP layer to the SDAP layer for UE.
Key changes include:
- Introduced `tun_generate_ue_ifname` and `tun_destroy` functions for better
TUN interface lifecycle management.
- Added support for creating and destroying UE-specific TUN interfaces in SDAP.
- Refactored `nr_pdcp_module_init` to remove TUN-related logic and moved it
to SDAP.
- Updated NAS and SDAP layers to handle PDU session-specific TUN interface
creation and configuration.
- Enhanced SDAP entity management to include TUN socket handling and thread
lifecycle.
- Updated NAS message handling to initialize default PDU session TUN
interfaces in NOS1 mode.
- Use a single SDAP thread function for gNB and UE
- Allow noS1 mode also in SA on gNB
These changes improve modularity by isolating TUN interface management within
the SDAP layer, aligning with the 3GPP architecture, and simplifying the PDCP
layer.
Co-Authored-By: Robert Schmidt <robert.schmidt@openairinterface.org>
3GPP 38.331 release 16 specifies that If the field reportQuantity-r16 is present, UE shall ignore reportQuantity (without suffix).
reportQuantity-r16 configures SSB based SINR as the reporting quantity.
set do_SINR = 1; in gNB params part of the config file to enable SSB based SINR reporting instead of the default RSRP based.
Encapsulate the asn1c call from cmake in a cmake function run_asn1c().
As a notable change to the previous manual add_custom_command()
invocation, in suppresses the output of asn1c by default [1] and stores
it in a log file. In case of asn1c4 error, the output will output on
stdout.
Use the new run_asn1c() in all occasions for code generation.
[1] it is quite verbose, with many warnings that we cannot influence nor
suppress, and lists all generated files which is verified by the build
system automatically, anyway.
[E2 agent] RAN Control SM - support for REPORT Style 1 ("RRC Message" and "UE ID" RAN Parameter IDs)
[Spring of Code 2024] contributions
Extended the RAN Control Service Model at E2 Agent to support all RC
REPORT Styles (1 - 5)
Implemented the following RAN Parameter IDs for REPORT Style 1:
1. "RRC Message": any DL-DCCH, and any UL-DCCH
2. "UE ID": as per spec, when the RRC Setup Complete or F1 UE Context
Setup Request detected
Fix inconsistent maxnoofPDUSessions definitions between NGAP and platform constants
There are 2 different definition of maxnoofPDUSessions (as per 3GPP TS
38.413), one in NGAP lib (set to 16) and one in platform_constants.h
(256 as per specs). The NGAP lib definition is removed in this commit
and replaced by the one compliant with the specs.
This is fixing the warning:
In function 'fill_pdu_session_resource_failed_to_setup_item',
inlined from 'rrc_gNB_send_NGAP_INITIAL_CONTEXT_SETUP_RESP' at /openair2/RRC/NR/rrc_gNB_NGAP.c:588:7:
/openair2/RRC/NR/rrc_gNB_NGAP.c:451:12: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
451 | f->cause = cause;
| ~~~~~~~~~^~~~~~~
In file included from /common/utils/ocp_itti/intertask_interface.h:235,
from /openair2/RRC/NR/rrc_gNB_NGAP.h:39,
from /openair2/RRC/NR/rrc_gNB_NGAP.c:31:
/openair2/COMMON/ngap_messages_types.h: In function 'rrc_gNB_send_NGAP_INITIAL_CONTEXT_SETUP_RESP':
/openair2/COMMON/ngap_messages_types.h:546:13: note: at offset [8724, 25769812488] into destination object 'gNB_ue_ngap_id' of size 4
546 | uint32_t gNB_ue_ngap_id;
| ^~~~~~~~~~~~~~
As per spec, UE ID shall be reported when the message event configured by
the Event Trigger Style 1 is set to “RRC Setup Complete" message (UE attach), or
“Xn/NG Handover Request” or “F1 UE Context Setup Request” (Intra gNB Handover).
In OAI RAN, Xn/NG Handover is not yet supported, and therefore not added as the trigger event
in this commit.
Additionally, as the Event Trigger Definition Format 1 is common for both "RRC Message" and "UE ID",
E2 node will report the “RRC Setup Complete" message which the xApp will decode and print.
Co-authored-by: Khanh Toan Pham <khanh.toan.pham@hhi.fraunhofer.de>
Co-authored-by: Shrinish Donde <shrinish.donde@hhi.fraunhofer.de>
Co-authored-by: Theodoros Tsourdinis <theodoros.tsourdinis@sorbonne-universite.fr>
Co-authored-by: Miguel Fuentes <miguel.fuentes@i2cat.net>
Co-authored-by: Teodora Vladic <teodora.vladic@openairinterface.org>
Fixes for E1 and PDU session usage
Fix a number of problems in E1 and PDU session handling:
- For multiple PDU session setup reqs, we send a bearer context setup
each time; fix an assert that was triggered on the second bearer
context setup message
- Add a log for E1 bearer context setup, as already done for
modification and release
- If we get a PDU session setup for an existing PDU session, reject it
as required by the spec [actually, it says to reject individual PDU
sessions; keep it simple for now and reject the entire message, which
might not be correct if there is one new PDU session that does not
exist]
- Add a workaround to handle multiple PDU session setup requests that
come in quick succession for different PDU sessions
Leading to clang error:
/oai-ran/openair2/RRC/NR/rrc_gNB_NGAP.c:1329:37: error: result of comparison of constant 256 with expression of type
'uint8_t' (aka 'unsigned char') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
The value comes from the decoding of: ie->value.choice.PDUSessionResourceToReleaseListRelCmd.list.count
There are 2 different definition of maxnoofPDUSessions (as per 3GPP TS 38.413),
one in NGAP lib (set to 16) and one in platform_constants.h (256 as per specs).
The NGAP lib definition is removed in this commit and replaced by the one
compliant with the specs.
This is fixing the warning:
In function 'fill_pdu_session_resource_failed_to_setup_item',
inlined from 'rrc_gNB_send_NGAP_INITIAL_CONTEXT_SETUP_RESP' at /openair2/RRC/NR/rrc_gNB_NGAP.c:588:7:
/openair2/RRC/NR/rrc_gNB_NGAP.c:451:12: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
451 | f->cause = cause;
| ~~~~~~~~~^~~~~~~
In file included from /common/utils/ocp_itti/intertask_interface.h:235,
from /openair2/RRC/NR/rrc_gNB_NGAP.h:39,
from /openair2/RRC/NR/rrc_gNB_NGAP.c:31:
/openair2/COMMON/ngap_messages_types.h: In function 'rrc_gNB_send_NGAP_INITIAL_CONTEXT_SETUP_RESP':
/openair2/COMMON/ngap_messages_types.h:546:13: note: at offset [8724, 25769812488] into destination object 'gNB_ue_ngap_id' of size 4
546 | uint32_t gNB_ue_ngap_id;
| ^~~~~~~~~~~~~~
This is a hack. With some UEs/CN combinations, PDU session requests
might come in quick succession. Since 38.331 asks us to only have one
reconfiguration at once, we need to delay a second, third, ... PDU
session request until the first has passed, to make one reconfiguration
at a time.
38.413 section 8.2.1.4 says that if PDU session resource setup req
contains an existing PDU session, that one should be reported as failed.
That is rather complicated for us to do; simply reject all PDU sessions
and let the core deal with that.
Use 5G-S-TMSI as UE identity in RRCSetupRequest
This MR includes the following implementation:
- Handle 5G-S-TMSI in RRCSetup:
- Set the ue-Identity to ng-5G-S-TMSI-Part1 in RRCSetupRequest and
- If RRCSetup is received in response to an RRCSetupRequest: set the
ng-5G-S-TMSI-Value to ng-5G-S-TMSI-Part2 in do_RRCSetupComplete
TS 38.331 5.3.3.3 Actions related to transmission of RRCSetupRequest message:
The UE shall set the contents of RRCSetupRequest message as follows:
1> set the ue-Identity as follows:
2> if upper layers provide a 5G-S-TMSI:
3> set the ue-Identity to ng-5G-S-TMSI-Part1;
- Pass 5G-S-TMSI to RRC when NAS receives GUTI in Registration Accept
- NAS extracts GUTI from Registration Accept
- send ITTI indication from NAS to RRC when GUTI is available and store
5G-S-TMSI in RRC instance
- Rework of Initial UE message handling in RRCSetupComplete: simplify code and memory management
- Fix for integrity failure after UE comes back from RRC IDLE
- Other NAS fixes
Note:
- Initial implementation of Initial NAS Message: Service Request -> moved to !3065 (merged)
- Rework of Registration Request added to !3176 (merged)
Closes#772
After a new connection from RRC IDLE, an integrity failure occurs. This
commit is addressing this issue to pass the integrity check.
* Reset ciphering and integrity algorithms when going into RRC IDLE
* Use uplink NAS COUNT in Registration Request for initial KgNB derivation
* Temporarily deriving UP protection keys in Registration Request
* Note: AS SMC handling should be done according to 33.501 §6.8.1.1.2.2
* Use the 5G-S-TMSI stored in RRC to be used as UE identity
* Use 5G-S-TMSI part 1 in RRCSetupRequest encoding (TS 38.331 clause 5.3.3.3)
* Set the ng-5G-S-TMSI-Value in RRCSetupComplete to ng-5G-S-TMSI-Part2 (5.3.3.4 of 3GPP TS 38.331)
* current and only scenario: RRCSetup is received in response to an RRCSetupRequest
francescomani