* this function is used by both CU-CP and CU-UP
* it behaves differently depending on the type of E1 instance:
CU-CP: inform RRC of E1 connection loss with CU-UP
CU-UP: trigger a new SCTP association request by sending an ITTI to the CU-UP task
* after receiving the E1AP register request, the CU-UP will send a new association request to
SCTP until new E1 connection is achieved by sending a TIMER_HAS_EXPIRED message to the CU-UP
task. The function e1apHandleTimer() is basically triggering a new E1 association request
until new E1 connection is achieved
* print SCTP association state in e1ap.c whenever needed
Related to #878
* add function to check whether cu-up is connected
* add functions to send the relevant response messages with the failed list
e.g. to fill PDU Session Resource Failed to Setup items
* set return value of trigger_bearer_setup to bool and handle the
failure by sending setup response messages with list of PDU sessions failed to setup
i.e. send failed list of items when no CU-UP is associated to the CU-CP
note: it considers all PDU Sessions as failed to setup in the considered failure scenarios
* e.g. send a list of failed PDU session resources in the response message to reject
PDU Session Resource Setup in rrc_gNB_process_NGAP_PDUSESSION_SETUP_REQ
* the Initial Context Setup has a Failure message, but for the considered failure scenario
when no CU-UP is available the current design is just sending a list of failed to setup
items in the Response message
* transfer PDU Session Resource/Initial Context Setup Request NAS PDU to UE
closes#878
* new struct definition including both NGAP cause group and value
* add encoding function, temporarily in ngap_common.c
(in the long term to be place in a enc/dec NGAP library)
* extend Radio Network cause enum values
* add cause member to Setup Failure
Fix TPMI for UL retransmissions
If the ul_ri of srs_feedback changes between a UL transmission and a
retransmission, we use the TPMI of transmission.
Closes#879
Assertion ((*nrOfLayers==1 && srs_feedback->tpmi <= 1) || (*nrOfLayers==2 && srs_feedback->tpmi == 0)) failed!
In compute_precoding_information() /home/user/openairinterface5g/openair2/LAYER2/NR_MAC_COMMON/nr_mac_common.c:2896
TPMI 1 is invalid!
Add support for O1 in O-DU via telnet
This change set adds a simple telnet interface to nr-softmodem. Together
with oai/o1-adapter>, this implements a part of the O1 interface, for
the DU only. Currently supported uses cases:
- some stats are send to an SMO (such as bandwidth, PLMN, frequency, ...)
- re-configuration of bandwidth, frequency
- stop/start of the softmodem, while keeping the CU and L2 running
- the o1-adapter implements two alarms, load overload and base station
offline, using this interface.
It is possible to use the telnet interface by itself (i.e., "o1" without
the o1-adapter). To do this, compile with telnet support (./build_oai
--build-lib telnetsrv) and start the nr-softmodem with O1 module
(./nr-softmodem --telnetsrv --telnetsrv.shrmod o1). You can then do the
following:
- see some statistics as exposed to o1-adapter, in JSON: echo o1 stats | nc 127.0.0.1 9090 && echo
- stop the L1: echo o1 stop_modem | nc 127.0.0.1 9090 && echo
- reconfigure bandwidth: e.g., echo o1 bwconfig 20 | nc 127.0.0.1 9090 && echo (also supported: 40, 60, 100)
- start the L1: echo o1 start_modem | nc 127.0.0.1 9090 && echo
Note that the reconfiguration works with split-8 radios. Notably, it
does not work yet out-of-the-box with 7.2 radios, because they have to
be manually reconfigured on bandwith/frequency switch. The planned
M-plane should allow such use case, though.
To help with the above, this branch also includes fixes (for more
information, refer to the corresponding commits):
- fixes for stopping the L1, notably stop threads in right order, stop
thread pool of RU
- collect some general MAC metrics, fix some bugs in MAC
- fix problems in F1AP gNB-DU configuration update message, update test
- fix some problems in RRC
The consumer of this function just passes a pointer to something to be
sent. This function should not free this memory, it's simply not it's
task. This is the same bug as above in
"CU_handle_gNB_DU_CONFIGURATION_UPDATE(): don't free the message of RRC"
Need to proper forward declaration, as we otherwise need to make
telnet_o1 module dependent on F1. Make functions publicly accessible,
as the F1 functions are used in an upcoming commit to start the L1.
Split out these functions, to be reused in a follow-up commit to
correctly have gNB-DU configuration update message working.
Change the return type copy_f1ap_served_cell_info(), to return the copy,
which IMO is more intuitive then passing target and source in
parentheses.
For the "restart" feature, earlier versions where creating multiple UL
TDA. This is not a problem (anymore), but to avoid that we call this
multiple times, add this assert.
NGAP-Initial Context Setup Failure
NGAP Failure message - Initial Context Setup Failure. When an Initial
Context Setup Request is received with the UE context as null, it
triggers Initial Context Setup failure
SIB19 utilization on UE
Following SIB19 initialization and scheduling on gNB (!2899 - merged)
and Receive SIB19 on nrUE (!2920 - merged), this merge request aims to
introduce the actual use of the SIB19 provided parameters by gNB in UE.
Changes needed for utilization include: initialization of position
coordinates parameters for UE (which are needed to calculate propagation
delay between UE and SAT), propagation delay calculations and timing
advance adjusts. Moreover, this change removes the now unused arguments
for ntn_koffset, ntn_ta_common and ntn_ta_commondrift
GTP: use direct call instead of ITTI
Using ITTI calls for user plane implies (1) a memory allocation, (2)
mutexes, and (3) queueing messages for each user plane packet, which is
heavy. Use a direct API call instead to reduce overhead.
NGAP Failure message - Initial Context Setup Failure.
When an Initial Context Setup Request is received with the UE context as null, it triggers Initial Context Setup failure.
- Removed ntn_koffset, ntn_ta_common, ntn_ta_commondrift arguments in order to be used directly from SIB19
- Removed global NTN_UE_Koffset variable and it's use
- Introduced getter functions for ntn related parameters
Using ITTI calls for user plane implies (1) a memory allocation, (2)
mutexes, and (3) queueing messages for each user plane packet, which is
heavy. Use a direct API call instead to reduce overhead.
- Added new structure to hold timing advance parameters
- Made SIB19 related calculation to save to this struct
- Modified in ra to get ta struct values
Guido Casati