imscope updates
- Add CSV export button to imscope
- Add extra cache for IQ data in imscope record thread so that UE time domain
data can be kept until PDSCH is decoded.
- Add metadata to UE time domain samples scope
- Add UE pdsch pre-compensation IQ and PDSCH channel estimates
Make number of UL/DL actors in NR UE fully configurable
Due to different processing requirements on different CPUs it might be
beneficial to enable the users to set the number of UL/DL actors.
Allow disabling UL/DL actor frameworks and processing inline or setting
the number of DL/UL threads with --num-ul-actors/num-dl-actors
This was tested to work with 0 UL/DL actors with rfsim.
Due to different processing requirements on different CPUs it might
be beneficial to enable the users to set the number of UL/DL actors.
Allow disabling UL/DL actor frameworks and processing inline or
setting the number of DL/UL threads with --num-ul-actors/num-dl-actors
This was tested to work with 0 UL/DL actors with rfsim.
The DPDK driver may directly provide the internal HW mbuf in the dequeued structure.
So don't try to free the mbufs from that dequeued structure, but the ones we allocated.
Fix UL chanel estimates mapping in 2-layer MMSE receiver
This MR addresses a degradation in UL throughput observed in 4x4 MIMO
tests, starting from 2025.w17.
The issue was traced to incoherent indexing in the ul_ch_estimates_ext
when handling 4-antenna UL configurations.
Add physim tests into ctest framework
Convert physim testcases listed in
cmake_targets/autotests/test_case_list.xml into ctest. Note: Tests for
dlsim_tm4 are excluded, due to compilation issues.
CTest evaluates success based on return code: '0' = pass, non-zero =
fail. For some simulators, the return code is non-zero even when the
test is successful (as indicated by success messages in the test logs).
For some simulators, the return code is always '0'. This inconsistency
has been address in the first two commits of this MR.
To build and execute these tests:
- using cmake
cd openairinterface5g
mkdir build && cd build # you can also do that in cmake_targets/ran_build/build
cmake .. -GNinja -DENABLE_PHYSIM_TESTS=ON && ninja tests
ctest
- using build_oai: physim-related ctests are activated when PHY
simulators are built (use build_oai with '-P' or '--phy_simulators'
option)
cd openairinterface5g/cmake_targets
./build_oai --ninja --phy_simulators
cd ran_build/build
ctest
Link to newly created 4g and 5g RAN-Physim-Cluster pipelines:
- RAN-Physim-Cluster-4G: https://jenkins-oai.eurecom.fr/job/RAN-Physim-Cluster-4G/
- RAN-Physim-Cluster-5G: https://jenkins-oai.eurecom.fr/job/RAN-Physim-Cluster-5G/
Initially we were testing SNR from -3 to 7 dB, in recent runs PUCCH test
succeeds at SNR = 0 or 1 dB. Starting at higher SNR helps to reduce test
runtime. Set maximum SNR to 7dB, as it was done in the initial test scenario,
to ensure that possible performance degradation is detected.
Convert physim testcases defined in cmake_targets/autotests/test_case_list.xml
into CTest based tests. These test are activated when '-DENABLE_PHYSIM_TESTS=ON'
CMake flag is set.
Note: Tests for dlsim_tm4 are excluded, due to compilation issues.
CTest evaluates success based on return code: '0' = pass, non-zero = fail.
The following table outlines the physim executables, their success expressions
(`expr_true`), and the return codes for success (`ret_success`) and failure
(`ret_fail`). The `expr_true` is used in test_case_list.xml to check for test
results.
| test_exec | expr_true | ret_succ | ret_fail |
| ------------- | -------------- | --------------- | ----------------- |
| dlsim | passed | 0 | -1 |
| ulsim | passed | 0 (ret) | 1 (ret) |
| ldpctest | BLER 0.000000 | 0 | 1 |
| polartest | BLER= 0.000000 | 0 | 1 |
| nr_pbchsim | PBCH test OK | 0 | 1 |
| nr_dlsim | PDSCH test OK | 0 | 1 |
| smallblocktest| BLER= 0.000000 | 0 | 1 |
| nr_ulschsim | PUSCH test OK | 0 (n_errors) | n_errors |
| nr_pucchsim | PUCCH test OK | 0 | 1 |
| nr_ulsim | PUSCH test OK | 0 (ret) | -1 (ret) |
| nr_prachsim | PRACH test OK | 0 (prach_errors)| > 0 (prach_errors)|
| nr_psbchsim | PSBCH test OK | 0 (errors) | > 0 (errors) |
Add CMake flag "ENABLE_PHYSIM_TESTS=ON" when building OAI with "-P"
or "--phy_simulators" option. This allows physim-related ctest to
be executed from build directory.
Add dependency on coding lib for all 4G physims
- Updated polartest, smallblocktest, and ldpctest to check BLER and return
appropriate status:
- Returns '0' if BLER equals 0.000000 (indicating success).
- Returns '1' for all other BLER values (indicating failure).
- This change improves consistency in return values across the test physims.
Raymond Knopp