NR Paging on CU
Implements the NR paging path on the CU:
- NGAP Paging is decoded and passed to RRC
- RRC builds F1AP Paging, and distributes it to DUs via F1 callback
Changes:
- Refactor and extend F1AP Paging encode/decode libraries
* add missing enc/dec/eq/cp functions
* add unit test
* IEs: CN UE 5G-S-TMSI, RAN UE I-RNTI; optional DRX/priority/origin)
- Refactor CU callback CU_send_Paging
- Refactor DU handler DU_handle_Paging
- Refactor old F1 callback for Paging indication, extend it and align
with existing F1 callbacks in stack
- Refactor and extend NGAP Paging encode/decode lib
* add missing enc/dec/eq/cp functions
* add unit test
* Fixes NGAP paging to accept Paging only on SCTP stream 0 per TS
38.412
- Includes supporting refactors (PDU session split, shared 5G-S-TMSI
helpers, NGAP/F1AP cleanups)
Testing
- NGAP and F1AP Paging lib unit tests (enc/dec)
- Stream-0 fix validated with Open5GS AMF
This MR does not address the DU changes besides the F1 handler. F1AP
Paging does not have an RRC container to pass the PCCH message to the
DU, and F1 DL RRC Message Transfer does not apply to PCCH. PCCH-Message
shall be built at DU per TS 38.331 §5.3.2, with padding as per §8.5 and
delivered as RLC SDU per §8.2. For each cell in Paging Cell List that
belongs to this DU, queue for MAC. MAC schedules at PF/PO per TS 38.304
§7.
Refs:
- F1AP 3GPP TS 38.473 version 16.21.0 Release 16
- NGAP 3GPP TS 38.413 version 16.17.0 Release 16
TO_ENUM/TO_TEXT are already used in NAS, and can be adopted in NGAP.
To avoid duplication, the following changes are introduced:
* Move text_info_t, TO_ENUM, TO_TEXT to common/utils/utils.h
* Include utils.h include to ngap_messages_types.h, fgs_nas_utils.h, and fgmm_lib.h
* RRC establishment cause: refactor to FOREACH_RRC_ESTABLISHMENT_CAUSE macro
* Cause Group: refactor to FOREACH_CAUSE_GROUP macro
* Radio Network Cause: refactor to FOREACH_CAUSE_RADIO_NETWORK macro
* Protocol Cause: refactor to FOREACH_CAUSE_PROTOCOL macro
This change is preparatory to the introduction the paging lib with unit
tests, with the goal of reducing the inter-dependency between concurrent
NGAP libs.
This commit centralizes equality-check behavior and removes duplicated
macro implementations across protocol stacks.
Major changes:
- add `common/utils/eq_check.h` with shared `_EQ_CHECK_*`,
`EQ_CHECK_GENERIC`, and optional-IE pointer helpers
- replace E1AP/F1AP/NAS local equality macros and call sites with
the shared helpers
- remove duplicated layer-specific error/equality macro definitions from
common headers and switch includes to `eq_check.h`
- update CMake test flags to define `ENABLE_TESTS` for `e1ap_lib`,
and 5GS NAS libraries; drop `E1AP_LOG_ERRORS` - equality-check/error
printing is now consistently controlled by `ENABLE_TESTS`
Centralizes 5G-S-TMSI bit manipulation logic for consistency and
maintainability. All manual bit operations replaced with documented
helper functions following TS 23.003 bit layout specification.
- Add helper functions for 5G-S-TMSI operations:
* nr_construct_5g_s_tmsi_part1: 5G-S-TMSI construction is defined
in 3GPP TS 23.003 and relevant at both gNB and UE side
* Add helper functions to be later used in NG Paging
* Adopt in NAS UE
* nr_extract_5g_s_tmsi_part1() - extract Part1 (39 bits) from full
* nr_extract_5g_s_tmsi_part2() - extract Part2 (9 bits) from full
* nr_build_full_5g_s_tmsi() - reconstruct full from Part1+Part2
* nr_deconstruct_5g_s_tmsi() - deconstruct into components
- Refactor manual bit manipulation to use helper functions:
* asn1_msg.c: use nr_extract_5g_s_tmsi_part1() in RRCSetupRequest
* asn1_msg.c: use nr_extract_5g_s_tmsi_part2() in RRCSetupComplete
* rrc_gNB.c: use nr_build_full_5g_s_tmsi() when reconstructing from parts
* rrc_gNB.c: use nr_deconstruct_5g_s_tmsi() when extracting components
- Optimize nr_construct_5g_s_tmsi_part1() to reuse extract function
When outputting to a file, typing ctrl+c exits the program without calling
fclose(), leading to loss of traces in the output file.
Let's intercept ctrl+c and exit gently, calling fclose().
Cleanup Cmake: remove some double compilation
Harmonize some cmake code to avoid double compilation, notably around
polar and smallblock. In develop, we just add their sources to other
targets, whereas now we define STATIC libraries (further changed to
shared library in !3856) to avoid double compilation.
With this command line:
cmake .. -GNinja -DENABLE_TESTS=ON && ninja
shows that before we compile 12631 files, where after it is 12583
there is additional supporting cleanup (move code, remove headers,
types, ...).
there is more harmonization to do, I limited myself to some easy wins.
For instance, we do the same with PDCP/SDAP, and this should be
refactored into STATIC libraries as well.
RRC: Multi-cell handling architecture
This MR implements a foundational multi-cell handling architecture for
RRC by separating DU management from cell management and establishing a
hierarchical cell organization within each DU container. The changes
enable proper multi-cell support where each DU can serve multiple cells,
addressing the previous limitation where DU and cell management were
tightly coupled with the assumption of one cell per DU.
Key Changes:
- Data Structure Separation: Separated for DU containers (DU-specific
info) from cell containers (cell-specific data)
- Global DU and Cell Trees: Cells are now stored in global RB trees in
RRC, similarly to DUs
- Du-specific cell seq_arr: within each DU container (du->cells) is
stored a seq_arr of cells belonging to the DU
- UE Cell Association Framework: Introduced serving_cells array to track
PCell and SCells for each UE with servCellIndex indexing
- Cell Management Library: Extracted cell management functions into
rrc_cell_management.c/h for better testability and maintainability
Other relevant changes:
- F1AP Refactoring: cell list definitions, heap allocation to prevent
stack overflow
- 5G-S-TMSI Helpers: Common helper functions for 3GPP TS 23.003
compliant construction
- Integration Tests: Comprehensive test suite for DU lookup, cell
lookup, and UE cell association
- Cell Duplication Checks: Validation in F1 DU configuration update to
prevent duplicate cells
- Documentation: Updated RRC developer documentation with multi-cell
architecture details
Validated with RFsim in re-establishment and handover scenarios.
reversing bits is not NR specific. Think of it like this: LTE code might
use reverse_bits*() as well, but in the old location, it would pull in a
bunch of NR dependencies that are superfluous.
In this case, there are a number of linker errors:
/usr/bin/ld: libL2_NR.a(rrc_gNB.c.o): in function `nr_rrc_transfer_protected_rrc_message':
/home/richie/oai/openair2/RRC/NR/rrc_gNB.c:330:(.text+0x6f6): undefined reference to `signal_rrc_msg'
However, nr_srssim does not need RRC, while it is being linked in. Thus,
link without nr_rrc and L2. For the remaining two linker problems:
- provide a definition of NR_IF_Module_init() as in most other
simulators
- move rrc_get_max_nr_csrs() to nr_common.c. It is already declared in
the corresponding header, and itself does not have anything to do with
RRC radio configuration, therefore it does not belong to
nr_radio_config.c
Finalize the migration from single-cell-per-DU to the multi-cell
architecture: remove legacy DU/cell fields and refactor RRC procedures
to use cell containers and UE serving cells instead of DU-based lookups.
Data structure changes:
- Remove nr_cellid from gNB_RRC_UE_t; cell identity comes from the UE's
serving_cells (PCell entry via ue_get_pcell_entry(ue)). UE_LOG_ARGS
and LOG_UE_* macros take a PCell entry pointer for null-safe cell_id
in logs; all call sites pass ue_get_pcell_entry(ue).
- Remove setup_req, mib, sib1, mtc from nr_rrc_du_container_t (held in
cell containers); remove nr_cellid from gNB_RRC_INST and its
assignment in gnb_config.c.
Function and signature updates:
- get_ssb_arfcn(): take cell container instead of DU.
- label_intra_frequency_neighbours(): drop du parameter, use cell only.
- Handover: Handover context (source and target) now stores cell
pointers (source->cell, target->cell) instead of DU pointers. When
the context is created (N2: on Handover Request; F1: in
nr_rrc_trigger_f1_ho), the target cell is set in ho_context->target->cell
and, for F1, the source cell in ho_context->source->cell.
nr_initiate_handover() takes only source_cell and reads the target
from ho_ctx->target->cell, so it no longer takes a target parameter.
The target is known at handover creation time, while the UE’s
serving_cells are only updated after F1 UE Context Setup Response.
- nr_rrc_trigger_f1_ho() and the N2 handover path pass cell pointers
and set ho_context->target->cell (and for F1, source->cell) when
the handover is triggered.
Procedure refactoring:
- Lookups: replace get_du_by_cell_id() with get_cell_by_cell_id()/
get_cell_by_pci(); remove get_du_by_cell_id() and
get_cell_information_by_phycellId().
Rationale: cell-specific data (MIB, SIB1, mtc, info) now lives in
cell containers, and a DU can host multiple cells. Callers need the
cell (to use cell->info, cell->mtc, etc.), not the DU. Looking up
by cell_id therefore returns the cell container
(get_cell_by_cell_id()); when the DU is needed, use
cell->assoc_id and get_du_by_assoc_id(). Looking up by PCI is
scoped (e.g. get_cell_by_pci_for_du() for a given DU, or via the
UE’s serving cells) because PCI is not globally unique.
- Setup/Reestablishment: resolve cell, register as PCell via
rrc_add_ue_serving_cell(); reestablishment resolves cell by PCI
(rrc_get_cell_by_pci_for_du), then rrc_remove_ue_scells_from_du +
rrc_add_ue_serving_cell; validate_ue_cell_association() after update.
- Measurement config: use cell->info (SCS/band) and cell->mtc.
- Handover: use cell containers end-to-end; after UE context
modification response call nr_rrc_update_cell_assoc_after_ho().
- NGAP: cell_id and TAC from UE PCell via rrc_get_pcell_for_ue();
Handover Notify: get cell for message content, use get_du_for_ue() for
DU existence check; paging resolves UE by 5G-S-TMSI-Part1 and uses that
UE's PCell (rrc_get_pcell_for_ue) for F1AP_PAGING_IND nr_cellid.
Performance and robustness:
- Use rrc_get_pcell_for_ue() when cell data is needed; use
get_du_for_ue() when only the DU is needed (F1/N2 HO trigger,
Handover Notify DU check) for efficiency.
- Reestablishment: remove old PCell before adding new; error handling
for PCell add and validation.
Code cleanup:
- F1 setup: stop copying/storing setup request in DU container; F1
disconnect only frees cell containers via rrc_free_cell_container().
- dump_du_info(): iterate du->cells and show all cells per DU.
- telnetsrv_ci.c: use du->gNB_DU_id directly and fix format (%ld).
- UeContextSetupRequest servCellIndex set to RRC_PCELL_INDEX; remove
servCellIndex from F1AP UE context modification request.
* 5G-S-TMSI construction is defined in 3GPP TS 23.003 and
relevant at both gNB and UE side
* Add helper functions to be later used in NG Paging
* Adopt in NAS UE
Implement TS 38.473 transparency for CellGroupConfig forwarding and handle re-establishment on a different DU
This MR implements the following fixes that are relevant in RRC
procedures (e.g. re-establishment, reconfiguration):
1. Transparent CellGroupConfig forwarding
This MR implements TS 38.473 transparency requirements by ensuring that
the CellGroupConfig IE is transparently forwarded from the gNB-DU to the
UE without any re-encoding at the gNB-CU. The CU stores and forwards the
encoded bytes transparently, while the DU is responsible for all
encoding and modifications (e.g., reestablishRLC flags). Motivation
Motivation: The 3GPP TS 38.473 specification mandates that the
CellGroupConfig IE shall be transparently signaled to the UE.
Previously, the CU was re-encoding CellGroupConfig depending on the
scenario, instead of retrieving it from the DU, violating the
transparency requirement. CU may decode for internal use but must not
re-encode for forwarding. Solution
Solution: Core Principle: The CU stores the encoded CellGroupConfig
bytes received from the DU and forwards them directly to the UE without
any re-encoding. The DU handles all encoding and modifications.
Key Changes:
1. Transparent Forwarding in RRC Reconfiguration
- Modified build_RRCReconfiguration_IEs() to use pre-encoded bytes
directly
- Changed parameter from cell_group_config to cgc (encoded byte
array with buffer and size)
2. Encoded Bytes Storage
- Added byte_array_t mcg field to RRC UE structure to store encoded
CellGroupConfig
- Added store_cgc() helper function to save encoded cell group in
the RRC UE Context at gNB (from F1AP messages)
3. DU Encoding Responsibilities
- Add gNB-DU Configuration Query IE support to trigger cgc encoding
to request CellGroupConfig from DU
- DU encodes CellGroupConfig with proper reestablishRLC flags
during re-establishment
- DU removes SRB1 from rlc-BearerToAddModList during
re-establishment (SRB1 re-establishment is done before
RRCReconfiguration)
4. New functions
- Add rrc_detect_reestablishment() function to detect
re-establishment during UE Context Modification
- Extracted rrc_gNB_first_reconfiguration_after_reestablishment()
function to handle first reconfiguration after re-establishment
- Added dump_cgc() and dump_mcg() utility functions for debugging
purposes
5. Re-establishment Flow
- rrc_gNB_process_RRCReestablishmentComplete() requests
CellGroupConfig from DU via gNB_DU_Configuration_Query in UE
Context Modification Request
- DU detects re-establishment and add reestablishRLC IEs
- CU stores encoded CGC from the UE Context Modification Response
and forwards it transparently in subsequent RRC Reconfiguration
Testing
Manual Testing:
- RRC re-establishment procedure completes successfully
- RRC Reconfiguration after re-establishment includes all DU-provided information
Issues fixed
Closes issue #837
2. Trigger UE Context Setup fallback upon reestablishment on DU
different from the original one
As per 38.401 §8.7: if the UE accesses a DU different from the original
one during re-establishment, the CU must trigger UE Context Setup toward
the new DU. This refers to steps 9-10 and steps 9’-10’. Either one or
the other can be executed during re-establishment.
e.g. if this happens during handover, it shall trigger a UE Context
Setup fallback on the CU.
This MR implements the required behavior by:
- Adding a new helper function rrc_handle_f1_ho_reestab_on_target() to
handle F1 handover reestablishment on target DU. The function triggers
UE Context Setup procedure when the UE reestablishes on the target DU
during an ongoing F1 handover.
- Calling this function when detecting that the UE is reestablishing on
the target DU during handover, i.e.: (1) from
handle_rrcReestablishmentComplete(), as per 38.401 §8.7, NOTE on steps
9-10: CU gets UL RRC MESSAGE TRANSFER from a DU different than the
original (2) from rrc_CU_process_ue_modification_required, as per
38.401 §8.7, NOTE on steps 9'-10': CU gets a UE CONTEXT MODIFICATION
REQUIRED from a DU different from the original one.
Also:
- add helper rrc_fill_f1_ue_context_setup and adopt it in handover
- move DRB list filler fill_drb_to_be_setup into rrc_gNB.c and rename it
rrc_fill_f1_drb_to_setup for consistency
See also TS 38.401 Figure 8.7-1 "RRC connection reestablishment
procedure" for reference
3. DU: Handle missing old UE context in DL RRC Message Transfer
During F1 handover reestablishment, the CU may forward a DL RRC Message
Transfer to the target DU with old_gNB_DU_ue_id included, even though
the target DU does not have the old UE context yet.
The code previously used AssertFatal when the old UE context was not
found, causing a crash: "CU claims we should know UE %04x, but we don't"
According to TS 38.473, the gNB-DU shall release the old gNB-DU UE F1AP ID only:
> if the gNB-DU identifies the UE-associated logical F1-connection If
> there is no matching connection, there is nothing to release.
Fix:
- Check if old UE context exists before accessing it
- If old UE does not exist, log error, clean up any stale F1 UE data,
and return early (do not deliver RRC message since reestablishment
can't be completed)
The goal is to address a recurrent issue in the F1 pipeline, see
jenkins-oai.eurecom.fr/job/RAN-SA-Handover-CN5G/514:
Assertion (oldUE) failed!
In dl_rrc_message_transfer() /oai-ran/openair2/LAYER2/NR_MAC_gNB/mac_rrc_dl_handler.c:956
CU claims we should know UE 35ce, but we don't
Issue: sometimes it happens that an ul failure occurs in the handover
pipeline, UE reconnects with different UE ID and fetch_du_by_ue_id fails.
- Modified fetch_du_by_ue_id in telnetsrv_ci.c to automatically find
the connected UE when no UE ID is provided, similar to other
telnet commands like rrc_gNB_trigger_f1_ho
- Updated test cases in container_sa_f1_ho_b210_quectel.xml to use
the improved command without hardcoded UE ID parameter
- This makes the command more robust and easier to use in CI tests
semi-manual remove of not used #define commands
As i was upset to see all these #define with no code under, i made a
global pass to remove the obvious cases semi-manual remove of not used
bodies
manual script, then a lot of manual review
grep -IRs "#define" ../openair* ../common/* ../executables/ ../nfapi/ ../radio/ | \
fgrep -v '(' | fgrep -v '//' |awk '{print $2}' | egrep -v "#define *$n"| \
while read n ; do
grep -IRs $n ../openair* ../common/* ../executables/ ../nfapi/ ../radio/ | grep -v "#define *$n" | grep -q $n || echo $n;
done
will give a decent list of #define never used. Then, I think we should
keep lists of # define when it comes from standards, even if the code
doesn't use it right now
Add Ethernet PDU session support and make PDU session request configurable
This MR adds support for Ethernet PDU sessions, and makes PDU sessions
configurable: per-PDU session ID, type (IPv4/IPv4v6/IPv6/Ethernet [1]),
DNN, NSSAI.
Concretely, it adds a new configuration file section pdu_sessions below
uicc0 that looks like this if everything is specified (default values
are shown):
uicc0:
[...]
pdu_sessions:
- id: 1
type: "IPv4"
nssai_sst: 1
nssai_sd: 0xffffff
dnn: "oai"
It is possible to list multiple PDU sessions (add new line - id: 2 to
request a second PDU session). It is backwards-compatible to the current
PDU session configuration (uicc0.dnn/nssai_sst/etc), the idea being that
either legacy or new configuration could be used, but (1) if
pdu_sessions exist, it will overwrite the legacy configuration, and (2)
multiple PDU sessions, and type, can only be configured using the new
config. The old parameters --extra-pdu-id and --default-pdu-id are not
accepted anymore. Documentation has been added to the UE tutorial.
It is possible to test an Ethernet PDU session [1]. It is possible to
test the PDU session inside the UE by verifying it has an TAP interface
oaitap_ue1, and ARPing the data network (arping has been added to
oai-nr-ue container for that purpose):
ip addr add 192.168.72.140/26 dev oaitap_ue1 # same subnet as data network!
ip link set dev oaitap_ue1 up
arping -c 20 -I oaitap_ue1 192.168.72.135 # will send ARP request in Ethernet frame to get IP address of data network
[1] See description MR !3769 for more information. On the UE side, only
the type has to be changed to "Ethernet".
NR UE: add support for multiple RF frontends
This MR adds basic support for multiple RF-frontends at the UE.
There are multiple reasons why we might want this:
1. There might be different antennas needed for different bands (e.g. NTN or
TN antennas). These antennas might be connected to different RF-frontends.
In case of Handover, the UE needs to dynamically switch between these
RF-frontends.
2. Each rf-simulator connection carries baseband I/Q samples. To be able to
perform a handover between two cells at different frequencies, there must
be two rf-simulator connections, as the baseband channels should not
interfere and thus cannot simply be added.
3. When we want to support multiple UE simulation within one instance of
nr-uesoftmodem, and allow multiple cells and probably even handover between
these cells, we need either:
1. dedicated RF-frontends for each simulated UE, or
2. dedicated RF-frontends for each connected cell and dynamically assign
simulated UEs accordingly.
This MR implements what is needed for 1., 2. and 3.1.
Use the new PDU session configuration functionality of the parent
commit. It is now possible to request multiple PDU sessions, and to
request specific PDU session types. While the new uicc0.pdu_sessions is
preferred, it is still possible to use the "legacy"
uicc0.dnn/nssai_sst/nssai_sd.
The old parameters --default-pdu-id and --extra-pdu-id are not allowed
anymore, as it is possible to manually define this in the UE
configuration. Correspondingly, fix the use of those options, where
applicable.
Note: since the default_pdu_id is changed to -1, all interface names
will have pX to interface names appended (oaitun_ue1pX). The next commit
will correct this.
Clear memory in shm_td_iq_channel after RX
Clear memory in shm_td_iq_channel after RX. This prevents the IQ
from being read twice. This can happen if the application crashes
and will keep the other side reading historical IQ samples.
Modify all functions to also handle TAP (where applicable). The actual
TAP interface code is not used in this commit, it will be used later.
To make the interface creation stand out, make "Interface XXX
successfully configured" a LOG_A.
Defacto, the PDU session ID for noS1 modes is already hardcoded, as
starting the nr-softmodem with --noS1 --default-pdu-id 1 leads to
Assertion (entity != ((void *)0)) failed!
In start_sdap_tun_gnb_first_ue_default_pdu_session() openair2/SDAP/nr_sdap/nr_sdap.c:163
Further, the --default-pdu-id parameter will be deactivated in a later
commit, and we cannot rely on it. Therefore:
- hardcode noS1 PDU ID (also used in --do-ra/--phy-test modes) to 10 and
use in gNB&UE
- pass the PDU session ID used in SDAP entity initialization down to
start_sdap_tun_gnb_first_ue_default_pdu_session() to always use the
correct one
For configuring a TAP interface, we need to set different options, which
is not easily feasible with the current change_interface_state() API (or
would make it more complex). To simplify while allowing to set flags
more flexibly, separate into two functions get/set_if_flags().
Introduce SRS physical simulator and improvements
This MR consists of two parts:
- Introduces SRS physical simulator to test different configurations of
SRS
- Improvements in the SRS channel estimation (Addressing the comments
from old, unfinished MR !2875)
- rewrite nr_srs_channel_estimation() to loop over rx antennas and
antenna ports to be able to parallelize
- Improvements in timing_advance_offset and timing_advance_offset_nsec
computation
- Introduce SRS multi-symbol channel estimation
- The channel impulse response is estimated from the averaged
channel frequency response over multiple symbols
- The channel frequency estimates are left as they are to be able to
estimate doppler in the future
- Simplify SRS channel estimation to handle memory alignment in the
case of different SRS configurations (eg: comboffset)
To use multiple symbols when running gNB, the following parameters needs
to be edited in the function get_srs_resource()
- srs_res->resourceMapping.startPosition with a range from {0,1,..,5}
corresponds to the start symbol {13, 12, .. 8} with in a slot
- srs_res->resourceMapping.nrofSymbols indicates the number of symbols
{n1, n2, and n4}
Make sure the that start symbol + number of symbols is < 14
The timing results for SRS in develop and srs_phy_simulator are as follows:
Command used: sudo ./nr_ulsim -n1000 -s50 -S50 -R273 -W2 -y2 -z2 -E 1 -P
develop
|__ RX SRS time 124.94 us (1000 trials) (124.94 total [ms])
|__ Generate SRS sequence time 0.05 us (1000 trials) ( 0.05 total [ms])
|__ Get SRS signal time 19.41 us (1000 trials) ( 19.41 total [ms])
|__ SRS channel estimation time 89.11 us (1000 trials) ( 89.11 total [ms])
|__ SRS timing advance estimation time 13.10 us (1000 trials) ( 13.10 total [ms])
|__ SRS report TLV build time 2.80 us (1000 trials) ( 2.80 total [ms])
|__ SRS beam report build time 0.00 us ( 0 trials)
|__ SRS IQ matrix build time 2.73 us (1000 trials)
srs_phy_simulator
|__ RX SRS time 211.93 us (1000 trials) (211.93 total [ms])
|__ Generate SRS sequence time 0.04 us (1000 trials) ( 0.04 total [ms])
|__ Get SRS signal time 19.55 us (1000 trials) ( 19.55 total [ms])
|__ SRS channel estimation time 152.05 us (1000 trials) (152.05 total [ms])
|__ SRS timing advance estimation time 36.67 us (1000 trials) ( 36.67 total [ms])
|__ SRS report TLV build time 2.96 us (1000 trials) ( 2.96 total [ms])
|__ SRS beam report build time 0.00 us ( 0 trials)
|__ SRS IQ matrix build time 2.88 us (1000 trials)
Note that in srs_phy_simulator, to compute timing offset ns, an
oversampling factor of 2 is performed. Also, for peak detection, we
average the channel estimates for every port.
fix array lenght errors, k variable wrapping threshold. Make the code smaller and more efficient
generate_nr_prach() has several errors coming from replace int16_t by
c16_t, and also older error in k wrapping at the end of the symbol
the code is also ridiculously complex, wasting memory and cpu time in
intermediate useless buffers and headache usage of memmove()
Make gpd config utility global
Make gpd a global utility macro for reading config/command line
parameters. Add a corresponding function with full name for clarity,
keep the short name for the macro for backward compatibility and ease of
use.
The main benefit of gpd/config_get_paramdef_from_name macro/function is
that it does not require maintaining a separate parameter index list.
Clear memory in shm_td_iq_channel after RX. This prevents the IQ
from being read twice. This can happen if the application crashes
and will keep the other side reading historical IQ samples.
Robert Schmidt