Reference: 3GPP 38.473 v16.21.0
Mandatory fields:
Transaction ID (supported)
LMF Measurement ID (supported)
RAN Measurement ID (supported)
Add F1AP positioning measurement failure indication message enc/dec + test
Reference: 3GPP 38.473 v16.21.0
Mandatory fields:
Transaction ID (supported)
LMF Measurement ID (supported)
RAN Measurement ID (supported)
Cause (supported)
Reference: 3GPP 38.473 v16.21.0
Mandatory fields:
Transaction ID (supported)
LMF Measurement ID (supported)
RAN Measurement ID (supported)
Positioning Measurement Result List (range: 1)
> Positioning Measurement Result List Item (range: 1..64)
>> Positioning Measurement Result (supported)
>> TRP ID (supported)
Reference: 3GPP 38.473 v16.21.0
Mandatory fields:
Transaction ID (supported)
LMF Measurement ID (supported)
RAN Measurement ID (supported)
Cause (supported)
Optional fields:
Criticality Diagnostics (not supported)
Reference: 3GPP 38.473 v16.21.0
Mandatory fields:
Transcation ID (supported)
LMF Measurement ID (supported)
RAN Measurement ID (supported)
Positioning Measurement Result List (range: 0..1)
> Positioning Measurement Result List Item (range: 1..64)
>> Positioning Measurement Result (supported)
>> TRP ID (supported)
Optional fields:
Criticality Diagnostics (not supported)
Reference: 3GPP 38.473 v16.21.0
Mandatory fields:
Transcation ID (supported)
TRP Information List (range : 1)
> TRP Information Item (range : 1..65535)
>> TRP Information (supported)
Further details of TRP Information:
TRP ID
TRP Information Type Response List (range : 1)
> TRP Information Type Response Item (range : 1..64)
>> CHOICE TRP Information Type Response Item
>>> NR PCI (madatory : supported)
>>> NG-RAN CGI (madatory : supported)
>>> NR ARFCN (madatory : supported)
>>> PRS Configuration (madatory : not supported)
>>> SSB Information (madatory : not supported)
>>> SFN Initialisation Time (madatory : not supported)
>>> Spatial Direction Information (madatory : not supported)
>>> Geographical Coordinates (madatory : supported)
For now, we only use Geographical Coordinates.
Optional fields:
Criticality Diagnostics (not supported)
Reference: 3GPP 38.473 v16.21.0
Mandatory fields:
Transcation ID (supported)
TRP list (range : 0..1)
> TRP list Item (range : 1..65535)
>> TRP ID (supported)
TRP Information Type List (range : 1)
> TRP Information Type Item (range : 1..64)
>> TRP Information Type Item (supported)
In the Initial Context Setup message, the NGAP forwards the AMF UE ID,
but not in the DL NAS Message, although 38.413 says, in $8.3.1.2 either
> The NG-RAN node shall use the AMF UE NGAP ID IE and RAN UE NGAP ID IE
> received in the INITIAL CONTEXT SETUP REQUEST message as identification
> of the logical connection
or in $8.6.2.2
> The NG-RAN node shall use the AMF UE NGAP ID IE and RAN UE NGAP ID IE
> received in the DOWNLINK NAS TRANSPORT message as identification of the
> logical connection
So forward in both cases for harmonization.
According to 3GPP TS 38.413, the 'Time UE Stayed in Cell' IE is an
integer ranging from 0 to 4095. This patch updates the data structure
to reflect the correct bit width and implements the dynamic calculation
based on the UE's residence time.
- Change time_in_cell from long to uint16_t in ngap_messages_types.h.
- Replace dummy value with real-time calculation in rrc_gNB_NGAP.c.
- Implement a ceiling of 4095 to comply with the 12-bit protocol limit.
Ref: 3GPP TS 38.413 Section 9.3.1.97
NR UE: calculate TA based on SIB19 information in NTN mode, if autonomous TA is not enabled
To achieve the goal, the hyper frame number (HFN) is introduced at the NR UE
PHY, MAC and RRC layers.
Besides this, we also implemented an orbit propagation to improve the accuracy
of N_UE_TA_adj, and a fix to keep the N_TA from RAR and MAC CE.
Fixes#981
The PDUSessionResourceReleaseResponse message was missing the mandatory
pDUSessionResourceReleaseResponseTransfer IE in each released PDU session item. This caused Open5GS to send an error indication.
Changes:
- Add encode_ngap_pdusession_release_response_transfer() function to
properly encode the transfer structure (empty since Secondary RAT Usage
Information is optional and not used, per 9.3.4.21)
- Always include the mandatory PDUSessionResourceReleasedListRelRes IE
- Always encode the pDUSessionResourceReleaseResponseTransfer for each
PDU session item
- Fix Release Command handler to decode and log Cause from command transfer:
instead of incorrectly copying command data to response: the 2 transfer
IEs in the Command and the Response messages are different and should
not be mixed
- Split Command/Response struct type definitions
- Add missing includes
1) Remove UE Context Release Response code: there is no
such thing in the specs, it is either UE Context Release Request
(NG-RAN node initiated) or UE Context Release (AMF initiated)
(3GPP TS 38.413). The former message has only the request, no
response is defined by the specs. The code in the stack had no
purpose at all and was removed.
2) The UE Context Release Request message only contains a PDU
Session Resource List (optional) of PDU Session IDs, therefore
the use of pdusession_release_t was wrong and was refactored
According to TS 38.463 - clause 9.2.2.4 and 9.3.3.12.
Also, fix response message by encoding choice IE only
with presence of modified PDU sessions.
Co-authored-by: rmagueta <rmagueta@allbesmart.pt>
This commit is removing the storage of selected PLMN in NGAP UE context.
We store the Serving PLMN in the RRC UE context instead.
The Selected PLMN is the PLMN that the UE chose (or was directed to) for registration
and it is sent in the RRCSetupComplete. This is different from the selected
PLMN mentioned in the NG INITIAL UE MESSAGE for network sharing.
Selected PLMN: determines which core network and AMF the UE is registered with
GUAMI = Identifies the serving AMF and includes the PLMN of that AMF
Serving PLMN: the PLMN that is currently serving the UE (e.g. contained in GUAMI)
The AMF’s PLMN may match the selected PLMN, or not (especially in network sharing or roaming).
Regardless, the UE always have a Serving PLMN.
Initial UE message does not have a TAI IE per se, but TAI is a mandatory
member of the mandatory UserLocationInformation CHOICE.
NR CGI is also mandatory and carried inside UserLocationInformation:
in network sharing, the PLMN ID in TAI takes on additional
significance: RAN is shared but CN are different, so in this case PLMN in TAI is
needed for the AMF route the message to the correct operator’s core.
If network sharing applies (e.g., shared RAN between PLMN-A and PLMN-B):
the UE or network may select PLMN-B instead, and that PLMN identity
is included in the Initial UE Message’s TAI IE.
Conclusion:
1) UE always sends the selected PLMN during the registration,
regardless of whether it is shared or not.
2) Selected PLMN Identity is an actual IE sent in the RRCSetupComplete
while in NGAP there's no Selected PLMN Identity IE, only PLMN Identity
IEs in both TAI and NR CGI. It is a subtle difference.
3) The serving PLMN of the UE needs to be stored in RRC UE Context for
later use in NAS procedures. e.g. at initial registration it matches
the Selected PLMN
4) No need to store PLMN in NGAP UE Context, params are passed by RRC
5) TAI and NR CGI, which contain the PLMN identity, are mandatory in
UserLocationInformation IE CHOICE, and should reflect current status
Changes
- Initial UE Message: pass UE-selected PLMN and NR cell id from RRC to NGAP
- Uplink NAS Transport: use PLMN, TAC, and cell id provided by the message;
- Build NR CGI from gNB ID + cell id
- Store UE-selected PLMN only in RRC UE context at NAS_FIRST_REQ for later
Uplink NAS, stop storing PLMN in NGAP UE context
Remove NR L2 simulator code from UE
This MR removes NR (SA and NSA) L2 simulator from the codebase. The code, at
least at the UE side, was done at a time where there was no clear L2/L1 split
leading to a complex implementation that never worked as expected. The L2
simulator has been broken and removed from testing for long time and, once it
needs to be revived, it would require a complete new implementation.
* There is no IE corresponding to PDU sessions failed to release
in the PDU SESSION RESOURCE RELEASE RESPONSE message. This was removed
and the corresponding code was refactored and cleaned up.
* In the Release Command handler, only established PDU Session are set to be
released. The Response message is filled accordingly.
- Move QoS-related enums and structures from ngap_messages_types.h to 5g_platform_types.h
- Replace ngap_* QoS types with generic qos_* types for better reusability
- Update field names from allocation_retention_priority to arp for consistency
- Update all references across RRC and NGAP modules to use new type names
- Remove duplicate QoS type definitions from NGAP-specific header
This improves code organization by centralizing QoS parameter definitions
in a common platform types header and eliminates NGAP-specific naming
in favor of more generic, reusable type definitions.
The maximum number of QoS flows is 64.
- Replace QOSFLOW_MAX_VALUE with MAX_QOS_FLOWS constant
- Move MAX_QOS_FLOWS definition to common/platform_constants.h
- Remove duplicate QOSFLOW_MAX_VALUE definition from ngap_messages_types.h
This improves maintainability by centralizing the QoS flow limit constant
and eliminates duplicate definitions across different header files.
Previously, the RRC layer was incorrectly allocating stack memory for the ho_required_transfer field and passing it to NGAP, however it was not used. The IE is mandatory but contains only 1 optional IE, therefore is encoded in the NG message with empty content.
Changes:
- Remove unnecessary ho_required_transfer field from pdusession_resource_t definition, the IE is encoded anyway with empty content. If Direct Forwarding Path Availability is needed at any stage in the future it can be added to pdusession_resource_t and filled in RRC.
- Add clarifying comment about empty HandoverRequiredTransfer structure
N2 handover
This MR introduces full support for N2 handover, covering handover
decision, preparation, execution, and notification between source and
target NG-RAN nodes.
Key features:
1. Handover Decision & Preparation:
- Implement N2 handover decision based on UE measurement reports.
- Generate the Handover Preparation Information message, including
RRCReconfiguration.
- Send Handover Required message from the source NG-RAN to the AMF.
2. Handover Execution:
- Decode and handle the Handover Request on the target NG-RAN.
- Process the Handover Command on the source gNB, triggering
RRCReconfiguration.
- Initiate Handover Notify after successful completion.
3 NGAP & RRC Enhancements:
- Implement NGAP encoding/decoding functions for Handover Required,
Handover Request, Handover Command, Handover Failure, and Handover
Notify (3GPP TS 38.413).
- Adds NG-RAN Status Transfer support (UL/DL) for PDCP COUNT
preservation during mobility:
- support for NGAP Uplink and Downlink RAN Status Transfer messages
(TS 38.413 §9.2.3.13-14) to enable proper PDCP COUNT value
transfer during handover or recovery: NGAP encoding/decoding for
RAN Status Transfer, PDCP helpers to extract and apply COUNT (HFN
+ SN) per DRB. This aligns with TS 38.300 §9.2.3.2.1 and TS 23.502
§4.9.1.3.3, ensuring PDCP status preservation in AM.
4. Testing:
- Introduce a Telnet command to manually trigger N2 handover using UE
ID and neighbor PCI.
- Add configuration file for testing N2 handover with a target gNB.
This commit completes the NGAP Mobility Management procedure for N2 handover.
Upon failure on source gNB the Handover Cancel message is sent to the AMF which
in return responds with an ack.
According to 4.9.1.3.3 of 3GPP TS 23.502:
> 2a. - 2c. The S-RAN sends the Uplink RAN Status Transfer message to the S-AMF,
> as specified in TS 36.300 [46] and TS 38.300 [9]. The S-RAN may omit sending
> this message if none of the radio bearers of the UE shall be treated with PDCP status preservation.
TS 38.300 says:
> For DRBs not configured with DAPS, the source gNB sends the SN STATUS TRANSFER message to the target
> gNB to convey the uplink PDCP SN receiver status and the downlink PDCP SN transmitter status of DRBs for
> which PDCP status preservation applies (i.e. for RLC AM). The uplink PDCP SN receiver status includes at
> least the PDCP SN of the first missing UL PDCP SDU and may include a bit map of the receive status of the out
> of sequence UL PDCP SDUs that the UE needs to retransmit in the target cell, if any. The downlink PDCP SN
> transmitter status indicates the next PDCP SN that the target gNB shall assign to new PDCP SDUs, not having a
> PDCP SN yet.
i.e., for DRBs for which PDCP status preservation applies (i.e. for RLC AM), which is is our case.
This commit introduces full support for NG-RAN Status Transfer message handling
(TS 38.413 §9.2.3.13-14) in CU. It enables correct state transfer of PDCP COUNT
values (SN + HFN) during mobility or recovery scenarios.
Summary of changes - NGAP:
* Added encoding/decoding support for UL/DL RAN Status Transfer message
* Defined structures for: ngap_drb_count_value_t, ngap_drb_status_t,
ngap_ran_status_container_t, ngap_ran_status_transfer_t
This commit introduces the NG Mobility Management Procedure known as
Handover Notification. The outbound message is sent by the target NG-RAN
and is known as Handover Notify. The procedure is used to indicate to
the AMF that the UE has arrived to the target cell and the NG-based
handover has been successfully completed
* after RRCReconfiguration complete, in the N2 callback for HO success
* add NGAP encoder for the message
* RRC callback to trigger Handover Notify message
Co-authored-by: batuhan duyuler <batuhan.duyuler@firecell.io>
* add NG Handover Command message decoder
* process in RRC: encode RRCReconfiguration message
from the received HandoverCommandMessage
* trigger RRCReconfiguration for handover
Co-authored-by: batuhan duyuler <batuhan.duyuler@firecell.io>
This commit completes the NG Mobility Management Procedure known as
Handover Resource Allocation. The outbound message is sent by the
target NG-RAN and is known as Handover Request Acknowledge.
Major changes:
* add RRC callback to trigger the generation of NG Handover
Request Acknowledge on the target NG-RAN
* add NG Handover Request Acknowledge encoder
Co-authored-by: batuhan duyuler <batuhan.duyuler@firecell.io>
This commit introduces the NG Mobility Management Procedure known as
Handover Resource Allocation. The inbound message is sent by the AMF
and is known as Handover Request.
Major changes:
(0) Add Handover Resource Allocation initiating message decoding
* add case for NGAP initiating message and unsuccessful message decoding
(1) handle Handover Request on the target NG-RAN
(2) decode NG Handover Request message
(3) process payload, e.g. create UE context,
store IDs, set UP security and trigger bearer setup
Co-authored-by: batuhan duyuler <batuhan.duyuler@firecell.io>
This message is sent from the Target NG-RAN to the AMF.
The commit introduces:
* NGAP encoding function
* N2 callback for the target gNB
* handle the failure in RRC, inform NGAP
* send NGAP message to AMF via SCTP
Note: UE context in NGAP is fetched from the amf_ue_ngap_id
Co-authored-by: batuhan duyuler <batuhan.duyuler@firecell.io>
This commit introduces the NG Mobility Management Procedure known as
Handover Preparation. The outbound message is sent by the source NG-RAN
and is known as Handover Required.
* introduce NGAP library for Mobility Management
* introduce NGAP IEs encoder functions for Handover Required and relevant common IEs
* handle RRC trigger in NGAP and Send NGAP Handover Required to the AMF
Co-authored-by: batuhan duyuler <batuhan.duyuler@firecell.io>
Rakesh Mundlamuri