- Phy config update and Sidelink frame parameters initialisation
- PSBCH scheduler to trigger TX PSBCH/RX PSBCH actions
- Sidelink indication with rx ind to trigger send SL-MIB to MAC
- Enable Scope for PSBCH use -d or --dqt
- Enable system testing of PSBCH for example using RFSIMULATOR:
- UE1 is a SYNCRONISATION SOURCE UE which transmits PSBCH
started using command -
sudo ./nr-uesoftmodem --sl-mode 2 --sync-ref 4 --rfsim --rfsimulator.serveraddr server
- UE2 syncs onto UE1 during sidelink search, gets the timing and continues to receive PSBCH
started using command -
sudo ./nr-uesoftmodem --sl-mode 2 --rfsim --rfsimulator.serveraddr 127.0.0.1
- In the default use case 2 Sidelink SSBs sent over 16 frames.
- In case SL-SSB configuration needs to be changed use -O option in the above command like
-O ../../../targets/PROJECTS/NR-SIDELINK/CONF/sidelink_preconfig_1txpool.conf
The main thread of nr-uesoftmodem (executing main()) is mostly working;
it is thus not necessary to set high priority. Instead, the threads
created with threadCreate() will receive higher priority, if possible
(as determined by the availability of SYS_NICE capability).
To inform if SYS_NICE is not present, print a warning in main().
set_latency_target() attempts to set keep "low latency" by
- writing a specific latency to /dev/cpu_dma_latency
- setting manually the minimum CPU processor frequency to be the maximum
There is no functionality to undo this after stopping the softmodem(s),
and most users are probably not even aware that OAI does this. It is
generally preferable to set this beforehand using a governor or by
disabling sleep states (as outlined in the tutorial, and in a follow-up
commit in the performance tuning docs).
The previous mlockall() call, to lock memory to RAM, is retained in a
new function. There were additional mlockall() calls, which have been
replaced with lock_memory_to_ram(), where necessary.
They use 4G NUMBER_OF_UE_MAX, which is not supposed to be present in 5G.
Further, the mutex and variable are global state; for Paging, we should
use F1.
Introduce a --no-itti-threads command line option to disable threading
in ITTI, and call message handlers in the current thread. This is being
introduced in order to increase repeatability when testing the nrUE with
the IQPlayer. Without this feature, runs with the IQPlayer will end up
differently, depending on the timing of ITTI threads, mostly when
sending messages to RRC and NAS.
Config options --reconfig_file and --rbconfig-file have been introduced
to modify the filenames of reconfig.raw and rbconfig.raw (e.g., in the
case of multiple UEs). These filen*ames* were to be prepended with
--rrc_config_path to set the path. In summary, three options were
necessary, when two are sufficient.
In this commit, change to the options --reconfig-file and
--rbconfig-file (slight change for harmonization with other options,
which mostly use dashes) to give the full path to the corresponding
files, and avoid to surprise users who would not expect to have three
options.
--rrc_config_path has been deprecated and an error will be printed if a
user attempts to use it.
- move following radios: AW2S, BladeRF, IRIS, LMSSDR, RFsimulator, USRP
- move following transports: Ethernet, benetel4g, benetel5g
- for each: create independent cmake variable to switch compilation
on/off, in order: OAI_AW2S, OAI_BLADERF, OAI_IRIS, OAI_LMSSDR,
OAI_SIMU, OAI_USRP, OAI_ETHERNET, OAI_BENETEL4G, OAI_BENETEL5G
- Remove RF_BOARD variable, allows to compile multiple boards at once
- where applicable: remove USERSPACE/LIB in path, i.e., move files up to
directories, as all are userspace libraries
Note that with the above, it is now mandatory to enable a radio
implementation before compiling it, e.g., for USRP:
./build_oai -w USRP
cmake .. -DOAI_USRP=ON && ninja oai_usrpdevif
1. Adding a "SL" frequency for Sidelink mode. The
importance of this variable is to ensure that
when we are in mode 1 (UE+UE+gNB), that the slot
configuration and frequencies do not overlap. This
SL frequency is important for rotation and allows
us to utilize the OFDM modulation and demodulation
functions that already exist in OAI.
2. Adding sl_mode to the command line for proper UE
deployment when in SL mode. sl_mode can be set to 0,
1, or 2. sl_mode 0 indicates no-Sidelink at all,
mode 1 is gNB, UE, and UE (3GPP defines mode numbers).
sl_mode 2 indicated UE to UE communications with no
gNB at all.
3. New functions for calculating the carrier frequency
for SL mode.
In the UE, we wish to handle ^C in the UE to send a message before
terminating, so we allow custom wait handlers to implement such
functionality. Use itti_wait_tasks_unblock() to unblock
itti_wait_tasks_end().
Also, implement itti_wait_tasks_end() using semaphores, as signals are
not async-signal-safe (and therefore should not be used in a signal
handler).
Creates function that have nr_pdcp_ prepended to their name, and change
the signature of some functions for the 5G PDCP:
- nr_pdcp_layer_init()
- nr_pdcp_data_req()
- nr_pdcp_remove_UE()
- nr_pdcp_config_set_security()
- nr_pdcp_remove_UE()
- Make separate functions for nr_pdcp_data_req_srb/drb()
The simulators have been changed: due to linker errors that would arise
otherwise, a lot of functions are defined in them to avoid such errors.
Some functions are also defined in header files; in this commit, we
define most functoins in nr_dummy_functions.c, which is compiled in, not
by including the C file, but by adding it to the target in
CMakeLists.txt
- nr_dlsim+nr_ulsim need NR_IF_Module_init(), so it cannot be in
nr_dummy_functions, but the others need it
- Link correcr NR_IF_Module_init() into these simulators, and reduce
overall link list
- Correctly link remaining simulators
Authors: Bo Zhao, Marwan Hammouda, Thomas Schlichter (Fraunhofer IIS)
- CMakeLists modification: add QtWidgets library, add new source files, MOC (Meta-Object Compiler) on the given source file
- build_oai modification
- Activate new GUI with Qt on the UE side
- 2 x 3 widget with I/Q sample for PDSCH
- Drop-down list implementation
Raghavendra Dinavahi