In some pipelines, it happens that iperf3 is hanging on 100% CPU load.
In these cases, a simple TERM signal does not seem to be enough to kill
it; KILL is necessary.
While e.g., RemoteCmd's driver paramiko has a timeout command, the
documentation [1] is not really clear how it is trying to stop commands.
Since it effectively does not stop, we have to assume it is only sending
TERM.
To remedy this, use the timeout command to start iperf3. We use option
-v for diagnose timeouts on stderr, and send KILL after an additional 3
seconds (-k3) if TERM does not succeed. The timeout is sent to the same
duration as the overall iperf timeout.
[1] https://docs.paramiko.org/en/3.4/api/channel.html#paramiko.channel.Channel.settimeout
make sure the SSB is offset by 4 PRBs from the BW start.
Therefore, the ARFCN for the SSB center must be offset by 14 PRB from the ARFCN for the BW start.
This reverts commit eaf28414ca.
This assertion was introduced as we (wrongfully) thought we needed to
calculate the SSB ARFCN at the CU. Since PBCH might carry one bit, which
is not available at the CU, only certain SSB ARFCNs would have been
possible.
With the availability of the SSB ARFCN through the
MeasurementTimingConfiguration, this is not necessary anymore.
These functions enables (un)deployment of the OAI CN v2.0.1, increase
reliability and speedup overall CN (un)deployment compared to current
implementation.
Use "--wait" helm option to wait for deployment/undeployment of the CN.
Wait for pods to be in a ready state before marking the release as
successful. If not deployed/undeployed before timeout, marked as
unsuccessful.
Hardcode path for OC CN5G deployment/undeployment
- Remove unused AmariUE config file, replace by new one - for PLMN 00102
- Change frequency of AW2S pipeline - Move center frequency by 40 MHz to avoid interferency with other setups
in the lab. Set center frequency to ~ 3450 MHz.
After the recent update of matix, collected logs contain color codes
and we did not find the way to switch them completely off.
Replacement of "docker compose logs" by "docker logs" resolves this
issue. This commit includes changes related to "docker logs" usage.
Unlike the previous commit, in noS1, we cannot use Attach(), as noS1
automatically brings up an interface, no matter whether the connection
succeeded or not. Therefore, consistently wait a bit longer to increase
the chance that the radio is really up.
For various reasons, the UE might take longer to connect to the eNB. A
simple sleep might not be enough; instead, use Attach() to actively wait
that the UE gets an IP address. The added bonus of this function is that
it will also stop&restart a UE if it did not attach, i.e., it will try
multiple times to attach the UE.
In a previous commit, the functionality of handling IPv6 (and DNS names)
as part of the IPv4 was introduced (in IPv4 field for backwards
compatibility). This commit now removes superfluous configuration
fields:
- IPv6: handled by IPv4 field
- active: users can just remove an entry
- preference: not needed
After the last commit, it is not possible to bind on separate interfaces
for F1-C and F1-U. In other words, it is for instance not possible to
have the F1-C on one subnet on one physical interface, and F1-U on
another subnet on another physical interface. This commit introduces a
second option MACRLCs.[0].local_n_address_f1u to allow to bind F1-U on
an alternative address; if it is not specified, the interface of F1-C is
reused.
The above only works for the DU; no corresponding option exists for the
CU. For the CU, use separate CU-CP and CU-UP.
Use it in the CI.
- adding a new test case
- the test case simulate a DL radio channel with noise and runs Iperf test with such channel conditions
- use CustomCommand class to send commands to a Telnet server
- switched from netcat’s unsupported -N option (OpenBSD) to --send-only (Ncat 7.94) for compatibility with CI
re-sync CI test in F1 RFSIM
- to be used in the future, for CI of RRCReestablishment in RFSIM
- adding four new test cases (040021, 040022, 040023, 040023) to the RFSIM F1 configuration
- the test cases simulate a disruption of the radio channel, verify UE sync loss and resync
and restore the original channel conditions
- use CustomCommand class to send commands to a Telnet server
temp xml
Robert Schmidt