- all RAN code, CI code, configuration files, dockerfiles, in CSSL v1.0
- all deployment code (openshift, charts, ancillary files like shell
scripts), in MIT
- documentation in CC-BY-4.0
- exceptions might apply and are listed in NOTICE
- there is a new LICENSES folder with all licenses
- CONTRIBUTIONS.md has been updated accordingly
For automated changes based on OAI PL v1.1:
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.{c,h,cpp}
perl -i~ -0pe 's/\/\*.*Licensed to the OpenAirInterface.*openairinterface.org\n#?/\/*\n * SPDX-License-Identifier: LicenseRef-CSSL-1.0\n/s' **/*.ts
perl -i~ -0pe 's/<!--.*Licensed to the OpenAirInterface.*openairinterface.org\n.*-->/<!-- SPDX-License-Identifier: LicenseRef-CSSL-1.0 -->/s' **/*.xml
The rest (cmake, files with missing license, cmake) manually.
Remove the \file directive, as it is always superfluous because the
current file is implicit [1]:
> If the file name is omitted (i.e. the line after \file is left blank)
> then the documentation block that contains the \file command will belong
> to the file it is located in.
Author names and e-mails are not relevant for us: it can always be
inferred from git blame, and is often outdated.
Eurecom code has been contributed and was under OAI PL v1.0/v1.1.
For the cpack package contact: put generic email address that is
independent of an individual and that will remain reachable.
[1] https://www.doxygen.nl/manual/commands.html#cmdfile
Fix Delta MCS mode, reimplement UL power control
This change set fixes the "delta-MCS" mode, and reimplements the UL power
control loops at gNB, i.e., for PUSCH and PUCCH. It further adds new T traces
to log PUSCH/PUCCH power infrmation, and cleans up code.
The "delta-MCS" mode in OAI refers to configuring a UE with deltaMCS in the
PUSCH-PowerControl IE (see TS 38.331). In this mode, the UE adjusts the PUSCH
power for transmissions to take into account for MCS (see TS 38.213 Sec. 7.1).
In other words, the target SNR can be set to a somewhat low value, and the UE
will still use the right power for UL transmissions. Note that the spec only
foresees this adjustment of UL power when using one layer. In contrast, in the
"normal" mode, the gNB sends TPC commands to keep a UE at a fixed target SNR
(default: 20dB), regardless of the MCS or number of layers. Future work is
planned to completely remove this fixed target SNR, which is not done in this
MR yet.
Further, there is a new power control loop implementation. Prior to this MR, on
each UL transmissions, the gNB uses the SNR to decide about TPC sent to a UE in
the next transmissions. The new implementation relies on averaging the SNR, and
a "TPC in flight" average to account for the slow reaction of the average SNR.
The sum of both quantities is the current SNR that is used by the UE. See the
commit messages or documentation for more information.
Further cleanup to group data (e.g., power control configuration, refactoring of
code to save space, ...) is done. Two new T traces GNB_MAC_PUSCH_POWER_CONTROL
and GNB_MAC_PUCCH_POWER_CONTROL are added; documentation exists to explain how
to graphically plot corresponding graphs.
PUCCH Format 1 decoder implementation and validation with nr_pucchsim
This is the implementation of the PUCCH Format 1 decoder, validated with
pucchsim in the current branch.
Build:
./build_oai --nrUE --gNB --ninja --phy_simulators
Run tests:
ctest -L nr_pucchsim -j 8
This commit completes the PUCCH Format 1 decoder implementation using
maximum-likelihood detection with RE averaging across symbols/RB (and
hop-wise averaging for intra-slot hopping). It also updates the PUCCH
simulation/test flow to align with the decoder changes, including
payload and logging consistency fixes needed for correct validation.
Remove old CUDA LDPC implementation
A new implementation is under way in !3955. To simplify the MR, remove the old
LDPC CUDA implementation in a first step.
* Option to build ldpc_cuda was remaining in the build script
* Build script option to build ldpc_cuda was still used in CI
* Mentions of ldpc_cuda were remaining in the documentation
Note: In the documentation, the example of ldpctest usage that was
loading ldpc_cuda was replaced by an example in which it is loading
ldpc_orig even though this is pointless as it makes ldpctest compare
ldpc_orig with ldpc_orig. On the other hand, it is the only library
other than the default ldpc that uses the former interface.
replace static allocation of max antennas in a dynamic structure for gnb rach
NB_ANTENNAS_RX was used in 5G by mistake
there was also a error in O-RU implementation, with no consequences
(index not in right order)
PTRS phase error is estimated in each symbol and should be compesation in the
last symbol. So far nr_dlsch_llr() used rxdataF_comp before PTRS phase
correction for all symbol except the last one. This commit fixes it by calling
nr_dlsch_llr() for all symbols after rxdataF_comp is compensated for PTRS phase
error. To do so, dl_ch_mag arrays are moved out of nr_rx_pdsch() to hold values
of all symbols.
put symbol index as first dimension. It is necessary because the offset for
the buffer to start of a symbol can be arbitrary and hence not aligned to 32
byte boundary. Having each symbol in a separate dimension ensures alignment.
Fix for NTN phy-test mode
- Corrected the initialisation of ntn params changed flag. Before this change on
UE, Phy-test was not running in NTN mode.
- Removed the assert wrt slot > 64 to run FR2-NTN in phy-test
- SIB2, 19 required only in SA mode like SIB1
- Introduced new method to schedule a slot in UL/DL in Phy-test mode. Dmod/ Umod
option in the command line with a value.
- This ensures that the slot n (in slots per frame) will be scheduled if
n % value == 0
- For ex: --Dmod 1 means every slot will be scheduled
- --Dmod 2 means every 2nd slot will be scheduled, like 0,2,4,6 until the
slots per frame 1.
- this can be used for testing FDD FR2 where slots go beyond 64 which is a
limitation of -D/-U option.
the code use a precomputed table of rotations: 16 steaps between -PI/3 and +PI/3
This commit replaces the precomputed table by in code computation.
This version improves code understanding, while it won't make any significant difference
--Dmod option/--Umod option,
for example --Dmod 1 will schedule every slot in slots per frame
--Dmod 3 will schedule every 3rd slot. You can use --Dmod option togethor with -D option
same for uplink scheduling too.
for FR2 with 120Khz scs, there are 80 slots. Removed the assert such that FR2 config
can be tested in phy-test, currently bitmap works only until 64 slots.
Use flat buffer for txdataF in gNB L1
This MR changes txdataF buffer format to hold freq domain data starting from
PRB0 instead of circular buffer that starts from PRB N/2. The motive is to
simplify RE mapping function in L1 and copying data to xran lib.
Added NTN-FR2 FDD bands defined in release 18 in Ka-band range
* NTN-FR2 bands 510, 511, 512 added. TS 38.101-5 v 18.9 defines these 3 FR2-FDD
bands for NTN operation.
* These bands are defined in Ka band range (17.3Ghz - 31Ghz).
* Tested using the added conf files using RFSIM and GEO configuration.
* There were some inconsistencies observed when testing with RFSimulator before UE
Syncs to the gNB in terms of samples being written for FR2 configurations. Once
the UE syncs, the inconsistencies disappear.
* this is the problem - UE writes incorrect number of samples and gNB complains
about getting samples in past
* The above inconsistencies were also fixed in this merge request.
* These commits solving above inconsistencies were removed from this MR and a
different MR was raised. MR with those commits: !3928.
So far txdataF buffer has DC RE as the first element. This was prefered
most likely to avoid memcpy before iFFT but comes with a small
complexity in RE mapping functions.
Instead, we use a flat buffer that holds freq domain data starting from
first negative SC. After resource mapping is done on all channels, each
OFDM symbol is shifted before iFFT so that the buffer start with DC RE.
This reduces complexity in mapping functions and later on when passing
beam IDs to 7.2 split RU especially when a beam is associated to
interleaved RB and/or REs.
There is already a memcpy in place to copy txdataF from gNB stuct to RU
struct. So this change does not introduce new memcpy.
Remove unused function arguments
Some of them, because there are hundreds if not thousands. Warnings at compilation time can be enabled using -Wunused-parameter.
Fix dB_fixed() function
- dB_fixed(0) returns 0 in develop branch;
- 0 in dB is -INF, but since we're dealing with integer variables, we'll put
20*log10(2^-15) in the output of dB_fixed() function, instead of 0.
- make all users use signed variables
Integrate NRPPA and NGAP messages required for positioning
This MR integrates NRPPA and NGAP messages required for positioning.
The following NGAP messages are integrated (3GPP 38.413 Version 16.0.0):
NGAP UPLINK UE ASSOCIATED NRPPA TRANSPORT
NGAP UPLINK NON UE ASSOCIATED NRPPA TRANSPORT
NGAP DOWNLINK UE ASSOCIATED NRPPA TRANSPORT
NGAP DOWNLINK NON UE ASSOCIATED NRPPA TRANSPORT
The following NRPPA messages are integrated (3GPP 38.455 Version 16.7.1):
TRP Information Request
TRP Information Response
Positioning Information Request
Positioning Information Response
Positioning activation request
Positioning Activation Response
Measurement Request
Measurement Response
This MR tests these messages via a standalone tester nr-cu-nrppa-test that
connects to the AMF to perform NGAP enc/dec and NRPPA enc/dec
Core Network:
To pull the docker images:
docker pull oaisoftwarealliance/ims:latest
docker pull oaisoftwarealliance/oai-amf:develop
docker pull oaisoftwarealliance/oai-nrf:develop
docker pull oaisoftwarealliance/oai-smf:develop
docker pull oaisoftwarealliance/oai-udr:develop
docker pull oaisoftwarealliance/oai-upf:develop
docker pull oaisoftwarealliance/oai-udm:develop
docker pull oaisoftwarealliance/oai-ausf:develop
docker pull oaisoftwarealliance/oai-lmf:develop
openairinterface5g$ cd doc/tutorial_resources/oai-cn5g
To deploy:
openairinterface5g/doc/tutorial_resources/oai-cn5g$ docker compose -f docker-compose-positioning.yaml up -d
To undeploy:
openairinterface5g/doc/tutorial_resources/oai-cn5g$ docker compose -f docker-compose-positioning.yaml down -t 0
RAN:
To compile:
openairinterface5g$ mkdir build
openairinterface5g$ cd build
openairinterface5g/build$ cmake .. -GNinja
openairinterface5g/build$ ninja nr-cu-nrppa-test
To run:
openairinterface5g/build$ LD_LIBRARY_PATH=. ./tests/nr-cu-nrppa/nr-cu-nrppa-test -O ../tests/nr-cu-nrppa/nr-nrppa-test.conf
To initiate positioning procedure:
openairinterface5g$ cd doc/tutorial_resources/positioning/
openairinterface5g/doc/tutorial_resources/positioning$ curl --http2-prior-knowledge -H "Content-Type: application/json" -d "@InputData.json" -X POST http://192.168.70.141:8080/nlmf-loc/v1/determine-location
UE: Fix if target cell during handover has SSB at a different offset as in source cell
These changes fixed these observed issues:
- If target cell has a different SSB position compared to source cell during
ho - sync was not successful.
- RAR does not get decoded if SSB position has changed on the target cell
compared to source cell.
0 in dB is -INF, but since we're dealing with integer variables, we'll put 10*log10(2^-30) in the output, which corresponds to the symmetrical maximum output of the function.
Actual problem is that SYNC does not happen on the target cell as frame parameters is not updated
and ssb start carrier is not correct in the UE frame parameters
function nr_get_ssb_start_sc to determine ssb_start_subcarrier
Robert Schmidt