This message is sent from the Target NG-RAN to the AMF.
The commit introduces:
* NGAP encoding function
* N2 callback for the target gNB
* handle the failure in RRC, inform NGAP
* send NGAP message to AMF via SCTP
Note: UE context in NGAP is fetched from the amf_ue_ngap_id
Co-authored-by: batuhan duyuler <batuhan.duyuler@firecell.io>
(1) add N2 ho decision based on measurements
(2) add trigger for N2 HO on source CU
(3) generate NG Handover Preparation Information message,
including RRCReconfiguration, to be passed to the
NG Handover Required message
(4) call RRC callback for Handover Required message
Co-authored-by: batuhan duyuler <batuhan.duyuler@firecell.io>
This commit introduces the NG Mobility Management Procedure known as
Handover Preparation. The outbound message is sent by the source NG-RAN
and is known as Handover Required.
* introduce NGAP library for Mobility Management
* introduce NGAP IEs encoder functions for Handover Required and relevant common IEs
* handle RRC trigger in NGAP and Send NGAP Handover Required to the AMF
Co-authored-by: batuhan duyuler <batuhan.duyuler@firecell.io>
During the N2 HO review has been found that the HO context
was not allocated at trigger time but later in the flow. This
might lead to issues in some scenarios (e.g. in N2 HO)
and it was fixed in this commit.
Introduce a new timer for the use case where a UE should not be
scheduled anymore after a certain time. This is the case, for instance,
during handover, where the "source DU" forwards the RRCReconfiguration
and should stop scheduling this UE after some time.
Originally, transm_interrupt was introduced in 5c6d90aaff ("Use
NR_timer_t for UE transmission interrupt, e.g., RRC processing") to stop
scheduling a UE.
Commit 004403c84d ("Implement F1 UE Ctxt Modif Transmission Action
Indicator") reused this timer in an attempt to save code with an
"interrupt follow action".
In commit 89ebbb4192 ("Do not trigger ul failure in measgap scheduling
and standardize the verification if MAC is active in other scheduling
functions"), the transm_interrupt timer is used to not schedule a UE
through function nr_mac_ue_is_active(). This led to the UE not being
forwarded the RRCReconfiguration, effectively breaking handover, as the
message never reaches the UE. By using a new timer, the intended
functionality is restored.
Fixes: 89ebbb4192 ("Do not trigger ul failure in measgap scheduling
and standardize the verification if MAC is active in other
scheduling functions")
Remove this flag, as it is not used as of this commit, and introduces
confusion (see next commit: we reused the trans_interrupt timer for
the transmission action indicator stop action, where the UE should stay
active, while it is *not* when transm_interrupt is active).
For clarity, rename to native_armv9 for clarity. The check inside Python
checked for native_arm, and if we introduce native_armv8 (for jetson),
it would also match that.
Add nr-cuup to run_locally.sh
E1 deploy wasn't enable in the run_locally.sh script to run the CI on a local
machine. This MR is adding it. It was validated locally.
Fix UE DCI monitoring after RRC setup
After the UE is configured with pdcch-Config, it continues to monitor
fallback search spaces in pdcch-ConfigCommon for DCI with C-RNTI.
The rational is that after sending RRC Setup the network won't know if
the UE has received and successfully applied it. Hence the network would
still continue to use the fallback DCI till it receives RRC setup
complete.
Closes#954
Fix memory allocation issue in KPM RAN function sd parameter handling
This fixes a segmentation fault in the gNB when a KPM xApp sends the sd
parameter in the subscription message.
The segmentation fault seems to occur because *sd is uninitialized when
malloc(**sd) is called. This causes a double dereference of an uninitialized
pointer - **sd reads a random memory value which becomes the size parameter
for malloc(), leading to unpredictable memory allocation and segfaults.
This fix allocates the size using malloc(sizeof(uint32_t)) instead of
dereferencing the uninitialized pointer.
After the UE is configured with pdcch-Config, it continues to monitor
fallback search spaces in pdcch-ConfigCommon for DCI with C-RNTI.
The rational is that after sending RRC Setup the network won't know if
the UE has received and successfully applied it. Hence the network would
still continue to use the fallback DCI till it receives RRC setup
complete.
Fix an issue in which the unpacking is erroneously deemed unsuccessful even though it succeed in pulling all the bytes, this was due to not properly handling the return value of pull16 which is either 0 or 2, not 0 or 1.
Check the results of push and pull operation with correct boolean operator.
During the review of the N2 HO MR it has been found that the wrong type
plmn_identity_t (S1AP) was used in RRC. Now updated to the platform type plmn_id_t.
The malloced struct is initialized to garbage and when
the IE is absent, the output "PDCP reestablishment"
member (allocated in the stack) is set to a random value.
Integration: `2025.w37`
* !3514 NR UE: add support for PDSCH rate matching with NZP CSI-RS
* !3630 feat(ldpc_aal): Do not try EAL init if FHI 7.2 is enabled
* !3634 reset MSG3 C-RNTI flag in case of failure
* !3566 fix 600 cppcheck notifications
* !3633 Fix PLMN print in select_amf
* !3631 Revert "Removed TRP-scheme byte from UL BF PDU to Interop with Aerial 25-1 (FAPI 10.02)"
* !3622 Populate sampled_ue_antennas
* !3601 gNB: adaptive DL/UL MCS based on reported SSB-SINR and measured PUSCH SNR
* !3637 fix bug in computing number of LCG IDs with data at UE
* !3635 Fixes and updates for UL scheduling, notably DSUUU
* !3607 Reworking BWP configuration
* !3531 Refactor measConfig
* !3612 CI: Creation of F1 Handover pipeline
* !3611 CI: Generalize PhySim tests, run PhySims on Gracehopper
Closes#985 and #975
See merge request oai/openairinterface5g!3636
CI: Generalize PhySim tests, run PhySims on Gracehopper
This changeset generalizes/harmonizes the CI infrastructure for physim
testing, and adds a new pipeline for physim tests on Gracehopper
machines.
Specifically:
- Refactor the existing CI code for running and analyzing physical
simulators. The existing code assumed those tests are deployed using
OpenShift. Instead, OpenShift/Helm-specificities (e.g., running a
"release") have been removed, and instead of hardcoding the deployment
of the physical simulators using a script for Helm, the function takes
any script that can deploy using Helm/docker/from source. The overall
appearance is the same.
- Add a new pipeline RAN-PhySim-GraceHopper-5G that executes physical
simulators on gracehopper. Reporting is done in the same way as for
existing physical simulators (e.g., like in the RAN-PhySim-Cluster-5G
pipeline), but deployed in docker instead of helm.
-> some tests don't work reliably on ARM yet and are skipped
- the RAN-gNB-N300-Timing-Phytest-LDPC pipeline has been reworked to use
the same code for testing T2 offload, with ctest, and the same
reporting.
- the CUDA LDPC test XML has been removed, as these tests don't work
reliably.
- add a new macro add_timed_physim_test() that allows to define
thresholds to be checked, so that ctest will check for them. see the
documentation for more information
CI: Creation of F1 Handover pipeline
In this MR we are modifying/adding all the required files (.xml, .conf,
.yml) in order to create a pipeline on Jenkins that allows us to test
OTA F1 handover.
Remove the runtime, which is not interesting, and add instead
- test name and if the test failed
- the threshold checks, if any, and
- possible additional information about test failures.
Prior to this change, each test would have, as label, it's description.
This leads to many labels, which are normally reserved for grouping
tests. Move the description into a custom property instead.
Since we rely on the JSON output for the generation of HTML reports, we
need to also extract the description from the generated JSON. However,
custom properties are only logged starting from cmake 3.30. For
back-wards compatibility, write an additional, separate environment
variable TEST_DESCRIPTION from which the description can be read as a
fallback.
For the add_timed_physim_test(), this has been already done in a parent
commit.
