Note: the reestablishment is broken, and a later commit fixes it.
The ServingCellConfigCommon is an inherently radio-related
configuration. As such, it should be handled by the DU, not the CU.
Therefore, move it "down" to the MAC.
- send F1 Setup using callback
- store f1 setup req locally for reference
- check F1 Setup Req against RRC data structures:
* if matches: send F1 Setup Response using callback
* if not matching: send F1 Setup Failure using callback
- don't send CU config update by default, we don't need this
- if the Setup Response does not contain a cell, don't activate. It is
possible the CU sends a gNB-CU configuration update, which will
initialize the structures
Use a struct to initialize the RRC at the beginning, and remove the
NRRRC_CONFIGURATION_REQ. This message is not necessary; the RRC/CU
should be initialized from the F1 Setup Request, coming from the DU.
Before this commit, we did not read the ServingCellConfigCommon (SCC)
completely at start; rather, we read most (but not all) of it, then also
the minRXTXTIME, and at RRC initialization in
openair_rrc_gNB_configuration(), we filled the
pusch-TimeDomainAllocationList into the SCC, depending on the
minRXTXTIME.
The reason might be that we read part of the SCC, use that to fill the
NRRRC_CONFIGURATION_REQ, read also the minRXTXTIME (part of the RRC
config), and then we have all we need to "finalize the SCC". Since we
move everything to the MAC, I avoid too much upfront code changes,
hardcode the minRXTXTIME (and check with an assert), and undo this in a
later commit when the "RRC config" relevant for radio parameters, e.g.,
minRXTXTIME, is moved to MAC.
I verified the equality of the SCC before (at the end
openair_rrc_gNB_configuration()) and after (at the end of
get_scc_config()) this commit manually using a printf, assuming that
after RRC initialization, we didn't do any further modifications to the
SCC. But in fact, I cannot know that we don't do it...
This branch series implements the usage of the F1 Setup Request
internally at the gNB, even if CU and DU run in the same process. Until
now, the F1 Setup Request contained struct fields to pass IP
configuration to the F1AP module; this information is not necessary in
monolithic, nor should it be relevant when passing the information in
F1 Setup Request.
Therefore, this commit moves all IP connection-related information out
of the F1 Setup Request and into a separate structure instead. In order
to give the F1AP module the necessary connection information, the
DU_REGISTER_REQ message is introduced that combines the F1 Setup Request
and IP configuration, such that the F1AP module can setup the SCTP
connection and then send the F1 Setup Request message.
In a later commit, there will be a callback for F1 Setup Request at MAC
to simply register the DU at the CU. The monolithic callback will simply
forward the F1 Setup Request The F1AP callback will look up the IP
configuration and create DU_REGISTER_REQ message containing IP
configuration and F1 Setup Request, which is then handled by the F1AP
module. To this end, a separate function in gnb_config.c allows to read
IP information from configuration.
- move following radios: AW2S, BladeRF, IRIS, LMSSDR, RFsimulator, USRP
- move following transports: Ethernet, benetel4g, benetel5g
- for each: create independent cmake variable to switch compilation
on/off, in order: OAI_AW2S, OAI_BLADERF, OAI_IRIS, OAI_LMSSDR,
OAI_SIMU, OAI_USRP, OAI_ETHERNET, OAI_BENETEL4G, OAI_BENETEL5G
- Remove RF_BOARD variable, allows to compile multiple boards at once
- where applicable: remove USERSPACE/LIB in path, i.e., move files up to
directories, as all are userspace libraries
Note that with the above, it is now mandatory to enable a radio
implementation before compiling it, e.g., for USRP:
./build_oai -w USRP
cmake .. -DOAI_USRP=ON && ninja oai_usrpdevif
We don't work much on asn1c. The version we use has several bugs.
There is an active community out there that fixes bugs and improves
asn1c. Let's use their version.
Provides the backoff from full-scale output at the L1 entity
(frequency-domain samples). Default is, 36 dBFS, which is the correct
value when using the OAI RU entity. For O-RAN RU, this value should be
set according to the O-RU manufacturer requirements. For example 12
would corresponding to 14-bit input level (6 dB/bit).
Applies the TX amp backoff to PBCH, PDCCH and CSI
Creates function that have nr_pdcp_ prepended to their name, and change
the signature of some functions for the 5G PDCP:
- nr_pdcp_layer_init()
- nr_pdcp_data_req()
- nr_pdcp_remove_UE()
- nr_pdcp_config_set_security()
- nr_pdcp_remove_UE()
- Make separate functions for nr_pdcp_data_req_srb/drb()
Robert Schmidt