PF uses MCS and average throughput to decide which UE to schedule. Thus,
the first loop selects the MCS, and the second does the main UE
allocation after sorting by priority, depending on the MCS.
A follow-up commit will remove sched_pusch from NR_UE_sched_ctrl_t.
Thus, we cannot rely on sched_ctrl to store the MCS in the first loop,
and look it up from there in the second. Instead, store it as part of
the UE iterator data, and take it from there.
A later commit will remove sched_ctrl->sched_pusch. Instead, the TX
power is also stored for each HARQ process (as they contain
sched_pusch). Read it from there, which should have the same effect.
Introduce an array with information on FAPI structures to save resource
allocation into. It's in nr_mac_gNB.h because the next commit reuses
this for all preprocessors.
DC subcarrier has a significantly higher energy compared to other CSI IM
resource elements. This causes the average interference + noise
estimation to be higher than CSI-RS signal power making the CQI 0. With
a third-party gnb that schedules PDSCH based on CQI, the UE never
receives DL DCI once it starts sending CSI reports.
- Add helper function to normalize bitrate values to Mbps for calculations.
- Add helper function to extract data from iperf test report.
- Clean up the UDP analysis function, improve test report formatting.
- Fix an issue where Gbps values were incorrectly reported due to inconsistent
unit parsing.
- Update CI unit test report checks to match the new formatting.
feat(LDPCImplementation.md): Fix documentation
Few ambiguities and outdated names were found in the LDPC documentation
by Vlademir Brusse (see in the devel mailing list).
- Outdated names of the functions of the segment coding interface.
- Ambiguity about loading of the segment coding libraries.
Fix Dedicated BWPs
- Improve SearchSpace selection
- Improve CORESET selection
- Fix fill 'initialDownlinkBWP->pdsch_Config' when there are
DedicatedBWPs
* This fixes the reported 'RSRP = 0' issue when the UE is in the
InitialBWP and we have DedicatedBWPs configured
- Add a 'common' type SearchSpace in the NR_BWP_DownlinkDedicated IE for
DedicatedBWPs
- Fix hardcoded 'controlResourceSetId' by making it dynamic
- Remove 'searchspaceid' from 'verify_agg_levels' function because it
was used only for LOG
- CI: Add DedicatedBWP to '40 MHz TDD F1+E1 SA' in
'RAN-SA-B200-Module-SABOX-Container'
Fix overflow when negating minimum int16_t value in precoding
This closes#955
It prevents undefined behavior caused by the minimum int16_t value
(-32768) in two's complement representation. Because possible negation
by multiplying with -1 during precoding cause an overflows since +32768
cannot be represented in 16-bit signed integers and end up again in
-32768 because of overflow, here reveald by using the SIMD functions.
Workaround we use a slightly smaller number than 1 in Q15 Format to
prevent this error. Q15 representation of (integer value -32767) -1 +
2^-15 = -0.999969482421875
remove specific directory for LTE SIM management tools
This is very old code has never been integrated with the "main" OAI
cmake infrastructure and more recent libraries.
This MR integrates the three binaries for LTE virtual sim management in
the regular build process and log system
Avoid the include gtpv1_u_messages_types.h, as this pulls in e.g., LTE
RRC definitions. The CU-UP load tester integrated in one of the
following commits should be able to build without LTE RRC, if it was for
GTP. Unfortunately, ITTI also pulls in LTE RRC, so it's also somewhat
useless...
Put some forward declarations instead. That also shows that the API is
unnecessarily complex, and would need some cleanup.
Remove sctp from all other targets, since we use sctp::sctp on
SCTP_CLIENT (would fail if it does not exist), and SCTP_CLIENT already
fulfils the SCTP dependency.
- Provide some documentation
- Make cmake keywards and sctp lib name lowercase
- Use standard form of find_package_handle_standard_args()
- Make an imported target sctp::sctp that will fail if being used in
cmake unless defined, which will avoid that "sctp" appears in the
cmake code but is silently discarded
See also:
https://cmake.org/cmake/help/latest/manual/cmake-developer.7.html#a-sample-find-module
Following frequency change in the pipeline, we observed degraded UL channel
conditions resulting in low UL throughput. Increasing attenuation on the gNB
side was found to mitigate this issue by improving UL channel quality
and reducing UL noise power.
Increase tested UL and DL bitrates in OAIUE pipeline.
Tell strncpy() the size including the NULL byte to make sure we copy all
data.
This just fixes these warnings:
openair3/NAS/TOOLS/conf_usim.c: In function ‘gen_usim_data’:
openair3/NAS/TOOLS/conf_usim.c:191:17: warning: ‘strncpy’ output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation]
openair3/NAS/TOOLS/conf_usim.c:190:53: note: length computed here
openair3/NAS/TOOLS/conf_usim.c:195:17: warning: ‘strncpy’ output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation]
openair3/NAS/TOOLS/conf_usim.c:194:54: note: length computed here
add copy with limited size and truncate properly with null C string termination.
As clang-format doesn't handle tab indented files and as it is not the
OAI coding rule, the entire file is re-indented with present OAI coding
rule.
Move the path to the beginning, so that we can use it early.
Specifically, it was after the SCTP module, and the next commit will use
the Findsctp.cmake module to find SCTP. Use the cmake-proper variable.
Robert Schmidt