Segmentation fault occured since the commit ID 9e5c5497ab,
where we try to copy the pointer which was not even been allocated. Before, we were
copying the address of a NULL pointer and therefore no segmentation fault.
This commit fixes the segmentation fault by checking if the memory was allocated, i.e. should not be
in the case of CU (as it doesn't contain MAC/RLC layers).
As per spec, UE ID shall be reported when the message event configured by
the Event Trigger Style 1 is set to “RRC Setup Complete" message (UE attach), or
“Xn/NG Handover Request” or “F1 UE Context Setup Request” (Intra gNB Handover).
In OAI RAN, Xn/NG Handover is not yet supported, and therefore not added as the trigger event
in this commit.
Additionally, as the Event Trigger Definition Format 1 is common for both "RRC Message" and "UE ID",
E2 node will report the “RRC Setup Complete" message which the xApp will decode and print.
Co-authored-by: Khanh Toan Pham <khanh.toan.pham@hhi.fraunhofer.de>
Co-authored-by: Shrinish Donde <shrinish.donde@hhi.fraunhofer.de>
Co-authored-by: Theodoros Tsourdinis <theodoros.tsourdinis@sorbonne-universite.fr>
Co-authored-by: Miguel Fuentes <miguel.fuentes@i2cat.net>
Co-authored-by: Teodora Vladic <teodora.vladic@openairinterface.org>
The REPORT service was hardcoded to only style 4, and therefore not easily extendable.
This commit moves the support for style 4 in a separate function.
Delete duplicated enum structs for RAN Parameter IDs for all the REPORT styles.
They are already defined in "openair2/E2AP/flexric/src/sm/rc_sm/ie/rc_data_ie.h".
Co-authored-by: Tano Bischoff <tano.bischoff@hhi.fraunhofer.de>
Co-authored-by: Khanh Toan Pham <khanh.toan.pham@hhi.fraunhofer.de>
Co-authored-by: Shrinish Donde <shrinish.donde@hhi.fraunhofer.de>
Co-authored-by: Miguel Fuentes <miguel.fuentes@i2cat.net>
Co-authored-by: Teodora Vladic <teodora.vladic@openairinterface.org>
The above is necessary to not compile as many gNB dependencies into the
UE. RLC only uses GTP, which was satisfied by L2_NR, but that's not
necessary. However, only that change results in
/usr/bin/ld: openair2/E2AP/RAN_FUNCTION/libe2_ran_func_cuup.a(ran_func_rc.c.o): in function `get_list_for_report_style':
openair2/E2AP/RAN_FUNCTION/O-RAN/ran_func_rc.c:596:(.text+0xbe7): undefined reference to `cp_e2sm_rc_event_trigger'
/usr/bin/ld: openair2/E2AP/RAN_FUNCTION/O-RAN/ran_func_rc.c:596:(.text+0xc5b): undefined reference to `cp_e2sm_rc_event_trigger'
/usr/bin/ld: openair2/E2AP/RAN_FUNCTION/O-RAN/ran_func_rc.c:596:(.text+0xd3b): undefined reference to `cp_e2sm_rc_event_trigger'
/usr/bin/ld: openair2/E2AP/RAN_FUNCTION/O-RAN/ran_func_rc.c:596:(.text+0xd9d): undefined reference to `cp_e2sm_rc_event_trigger'
/usr/bin/ld: openair2/E2AP/RAN_FUNCTION/O-RAN/ran_func_rc.c:596:(.text+0xded): undefined reference to `cp_e2sm_rc_event_trigger'
/usr/bin/ld: openair2/E2AP/RAN_FUNCTION/libe2_ran_func_cuup.a(ran_func_rc.c.o):openair2/E2AP/RAN_FUNCTION/O-RAN/ran_func_rc.c:596: more undefined references to `cp_e2sm_rc_event_trigger' follow
/usr/bin/ld: openair2/E2AP/RAN_FUNCTION/libe2_ran_func_cuup.a(ran_func_rc_subs.c.o): in function `remove_rc_subs_data':
openair2/E2AP/RAN_FUNCTION/O-RAN/ran_func_rc_subs.c:60:(.text+0xbe): undefined reference to `find_if'
/usr/bin/ld: openair2/E2AP/RAN_FUNCTION/O-RAN/ran_func_rc_subs.c:62:(.text+0xca): undefined reference to `free_e2sm_rc_event_trigger'
nr-cuup previously satisfied these dependencies by depending on L2_NR
which links in e2_ran_func_du_cucp_cuup. However, the nr-cuup E2 RAN
functions are in e2_ran_func_cuup. In the latter, the file rc_data_ie.c
was missing (for cp_e2sm_rc_event_trigger), which in turn needs
e2sm_rc_ir_obj. Finally, find_if comes through alg.
Co-authored-by: Robert Schmidt <robert.schmidt@openairinterface.org>
Issue: unforeseen capability of having the same RAN Parameter ID across different
REPORT service styles.
Solution: keep only RAN Parameter IDs from REPORT styles that are supported by OAI.
Implement sequence array where each element is combination of RIC request ID (unique per RIC SUBSCRIPTION)
and Event Trigger Definition. This way we can properly check further conditions for a certain RAN Parameter ID.
(e.g. if xApp is subscribed to RRC Connected and/or other modes, for "RRC State Changed To" RAN Parameter ID)
Next steps: for new RAN Parameter ID, add new sequence array.
Co-authored-by: Bischoff <tano.bischoff@hhi.fraunhofer.de>
Co-authored-by: Shrinish Donde <shrinish.donde@hhi.fraunhofer.de>
Co-authored-by: Khanh Toan Pham <khanh.toan.pham@hhi.fraunhofer.de>
* Remove the ulsch_slot_bitmap and dlsch_slot_bitmap from nrmac
* Adopt the new is_dl_slot/is_ul_slot functions in the stack
to replace is_xlsch_in_slot: these functions are getting
the DL and UL slots as they are set in the TDD configuration
stored in tdd_slot_bitmap (frame_structure_t)
* Keep is_xlsch_in_slot in openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_phytest.c:
this is necessary because the phy-test pre-processors are using the bitmaps
dlsch_slot_bitmap and ulsch_slot_bitmap to check which DL/UL slots to use
for transmission among those set in the TDD configuration
Co-authored-by: Guido Casati <guido.casati@firecell.io>
ran_func_kpm.c uses cp_ba_to_str(), but it is not defined in OAI. Define
it so we can link properly, instead of relying on FlexRIC (where it was
defined).
The asserts might be used to intentionally stop the running process.
Further, it might be an annoyance if it happen unintentionally. Just
print an error message instead, and return to FlexRIC that nothing is to
be sent.
Use a common structure nr_lc_config_t to group LC configuration for one
logical channel. Use seq_arr for simple lookup, adding, removing of
elements without manual indexing logic.
This commit retains the previous logic of adding/releasing LCs through
the process_CellGroupConfig(), although we know while building the
CellGroupConfig if we add/release LCs. The next commit fixes this.
If we do not make this change, with the next commit, we get the
following error from gcc:
openair2/E2AP/RAN_FUNCTION/O-RAN/ran_func_kpm.c:299:46: error: assignment of read-only location '*(arr_ue_id.ue_info_list + (sizetype)(arr_ue_id.sz * 2444864))'
| arr_ue_id.ue_info_list[arr_ue_id.sz] = *ue;
- RAN Function Definition implemented
- ran_func_kpm.c - use function pointers based on the matching condition,
and node type
- ran_func_kpm_subs.h/c - for measurement collection within
MAC/RLC/PDCP layers; for CU-UP node only PDCP included (otherwise,
we would get undefined reference to MAC/RLC)
- use mutual E2SM UE ID file
- create hash table to save ric_req_id (key) and array of ran_param_id(s) (values), per each subscription
- create RB tree to store list of ric_req_id(s) for each ran_param_id
=> when the async event occurs, it is easier and faster to search per ran_param_id and send the indication message to all xApps (ric_req_id(s)) subscribed to the same ran_param_id
- it is important to mention that both data structures need to be maintained, especially when unsubscription occurs (free_aperiodic_subscription)
- e2_ran_func library divided into e2_ran_func_cuup (CU-UP only) and e2_ran_func_du_cucp_cuup (DU, CU, CU-CP and gNB-mono)
- GTP SM is not yet implemented in CU-UP -> CU-UP doesn't store PDU session information
- PDCP SM support for gNB-mono, CU and CU-UP
- KPM SM support for all node types (DU, CU, CU-UP, CU-CP and gNB-mono)
Correctly match UEs based on the NSSAI in MAC and RRC. There is a
convenience function capture_sst_sd() that extracts SST and SD (which
form the NSSAI). Because a previous version used integers to convey the
slice identifier, this function gracefully handles this case, although
it is not spec-compliant.
Prior to this commit, the RAN function for KPM is leaking memory: it
allocates using calloc() but never frees it.
The fix consists of not allocating this memory on the heap in the first
place, but on the stack. Therefore, there are changes to pass in a
pointer to various functions to the structure on the stack, instead of
passing the "container" for the heap memory by value.
Further, the MAC was allocating an excessive amount of memory (N times
sizeof(NR_UE_info_t)). Instead of copying the entire struct, the present
code stores a pointer to the MAC UE container (NR_UE_info_t *). For the
RRC, there is a similar simplification that consists in not storing the
entire struct f1_ue_data_t (which is not required), but only the RRC UE
ID.
Note that both MAC and RRC might suffer from race conditions. For the
MAC, we should lock the scheduler for the time we read statistics. For
the RRC, the problem is more delicate as no mutex exists; the RRC
assumes everything is executed synchronously in the ITTI task loop. In
both cases, this commit does not address this problem
Filtering UEs by NSSAI is broken, so remove it. A later commit will
reestablish this functionality.
Simplify the code: we only handle one condition, so we can check for it
upfront.
- Add O-RAN KPM SM with DRB.RlcSduDelayDl, DRB.UEThpDl and DRB.UEThpUl measurements
- Add L1M.PHR1.BinX KPM meas
- Add comments for all KPM meas; deleted few outputs (but added in xApp)
- Add DRB.PdcpSduVolumeDL and DRB.PdcpSduVolumeUL KPM meas
- Delete unnecessary rnd functions in ran_func_kpm.c -> path set to
flexric submodule
Teodora