RF emulator and improvements of the timers
RF emulator:
Add an RF library emulating a real device without the need of a real
device. This is thought to enable using phy-test without requiring a
radio device or channel simulation. The library synchronizes on the
real time clock, drops TX and generate noise on RX. Noise generation
can be disabled and the noise level configured.
Timers improvements:
- Fix standard deviation for merged timers
- Add display of ULSCH decoding timers
- Add decoding timer in AAL
Add a simple RF emulator library with no real RF.
It only synchronizes the gNB with the real time clock.
It is to be used for stress test or benchmarking in phy-test mode.
Redirecting to a file has the problem that it is difficult in the CI to
recover these files. Furthermore, at least with ninja, when running
build_oai interactively, the build output will only take some lines
(because ninja rewrites lines), so the change should not be that big to
users.
One CI function would print the entire output from build_oai to the
console. Since that output might be long now, do not do this. The file
is archived, anyway.
Rename the library to reflect that it's more a generic AAL driver than
specifically for AAL. To this end, rename some documentation.
As of this commit, the options are still called nrLDPC_coding_t2. The
next commit will correct this.
Co-authored-by: Xin Zhe Khooi <khooixz@comp.nus.edu.sg>
The common library exposes functions for the PNF to return the received blocks to the VNF for it to call WLS_Enqueue on them.
This is done in order to ensure the Blocks are returned after processing, also preventing the Dequeueing of blocks that are still being used, i.e. the internal value is not -1
All saved blocks are to be enqueued at the reception of a SLOT.indication by the VNF
Additionally, the definition of NFAPI_MAX_PACKED_MESSAGE_SIZE was moved to nfapi_interface.h and removed from the other headers, this is done to allow to set the maximum message size when using WLS by only changing the value in one place
Fixup fapi_nr_message_header_unpack call in nfapi_hex_parser
Convert physim testcases defined in cmake_targets/autotests/test_case_list.xml
into CTest based tests. These test are activated when '-DENABLE_PHYSIM_TESTS=ON'
CMake flag is set.
Note: Tests for dlsim_tm4 are excluded, due to compilation issues.
CTest evaluates success based on return code: '0' = pass, non-zero = fail.
The following table outlines the physim executables, their success expressions
(`expr_true`), and the return codes for success (`ret_success`) and failure
(`ret_fail`). The `expr_true` is used in test_case_list.xml to check for test
results.
| test_exec | expr_true | ret_succ | ret_fail |
| ------------- | -------------- | --------------- | ----------------- |
| dlsim | passed | 0 | -1 |
| ulsim | passed | 0 (ret) | 1 (ret) |
| ldpctest | BLER 0.000000 | 0 | 1 |
| polartest | BLER= 0.000000 | 0 | 1 |
| nr_pbchsim | PBCH test OK | 0 | 1 |
| nr_dlsim | PDSCH test OK | 0 | 1 |
| smallblocktest| BLER= 0.000000 | 0 | 1 |
| nr_ulschsim | PUSCH test OK | 0 (n_errors) | n_errors |
| nr_pucchsim | PUCCH test OK | 0 | 1 |
| nr_ulsim | PUSCH test OK | 0 (ret) | -1 (ret) |
| nr_prachsim | PRACH test OK | 0 (prach_errors)| > 0 (prach_errors)|
| nr_psbchsim | PSBCH test OK | 0 (errors) | > 0 (errors) |
Add CMake flag "ENABLE_PHYSIM_TESTS=ON" when building OAI with "-P"
or "--phy_simulators" option. This allows physim-related ctest to
be executed from build directory.
Add dependency on coding lib for all 4G physims
FHI72: Management plane support
At the moment, tested with Benetel 550 and 650 RUs FW v1.2.2
- support for multiple RUs
- RPCs implemented: <connect>, <subscribe>, <get>, <supervision-watchdog-reset>,
<edit-config>, <validate>, <commit>, <disconnect>
- read PTP sync status from operational datastore xml
- get vendor name, and for xran store RU MAC, MTU and IQ bitwidth and PRACH
offset, and transfer this info
- store interface name, low-level-tx/rx-endpoint names, tx/rx-carrier names,...,
from operational datastore xml
- add reference gNB/DU config files with M-plane support
- update FHI readme
There are command line options that one might pass to ninja/make, but
for which cmake does not provide an interface. For instance, make/ninja
support -k/-kN to "keep going" after errors. Cmake does not provide an
option, but it is still possible to pass this. Make a build_oai option
to allow this, used in the next commit.
This commit adds yaml-cpp library to required docker images and build commands. There is one workaround
in cross-compilation for apt behavior for installing libyaml-cpp-dev. Apt will uninistall previous
versions of the package whenever another one is installed. This means that installing the arm version
breaks amd version and vice versa. This makes it impossible to have both libs installed at the same
time which is required by the cross-compilation build command (it calls cmake twice, once with native
and once with target architecture)
I don't know about any user of the kernel modules. It is effectively
legacy code we carry around, for no good reason. Remove it for the
moment. If we ever need it, we can revert.
Ubuntu 18.04 is now in "Extended Security Maintenance", but otherwise
gets no updates. Remove it from supported distributions (regarding
installing packages); users can of course still use it.
Users are encouraged to upgrade to Ubuntu 20+.
- Add the O-RAN 7.2 FHI library, interfacing with OSC xRAN library (E
release)
- Add Findxran.cmake to detect the library and headers, including
version information
- Test for numa and DPDK presence
- Add patch for OSC xRAN to make interworking possible
- Add sample config files for LiteOn, Benetel, and VVDN units.
Documentation is provided in the next commit.
Co-authored-by: Raymond Knopp <raymond.knopp@eurecom.fr>
Co-authored-by: Cedric Roux <cedric.roux@eurecom.fr>
Co-authored-by: Manish Kumar Singh <manish1.kumar@amd.com>
Co-authored-by: thamizhselvan.k <thamizhselvan.k@vvdntech.in>
Co-authored-by: rajeshwari.p <rajeshwari.p@vvdntech.in>
Co-authored-by: Hongzhi Wang <hongzhi.wang@openairinterface.org>
Co-authored-by: Sofia Pison <Sofia.Pison@eurecom.fr>
As described in common/utils/config.h, it is possible to hook into the
asn1c tracing mechanism to print logs.
This commit fixes a regression to print theses traces properly in OAI.
Above-mentioned file explains also how to reduce the amount of logs,
e.g., for single code blocks.
Rakesh Mundlamuri