Local_Cmd forces use to use absolute paths for copy operations (because
that makes more clear where files are being copied). Use the absolute
path to avoid the corresponding exception.
Added 3 way F1 handover test with data exchange in the F1 pipeline.
The major change is that the UE is acting as a server in the handover
scenarion, so it needs to comply with the changes in !3280.
Update of gNB-N300-Timing-Phytest threshold
Current results are in some cases well below the current thresholds. We should
periodically adapt them to actual values so that the test is meaningful.
fix(nrLDPC_coding): timers in DL encoding, fix(ldpctest): Confusion in sizes
Main improvements:
1. fix(ldpctest): Confusion in sizes
IMPORTANT: This fix makes that ldpctest now works with BG2 and K' != K!
(Worth double checking with more cases than I did check with though)
The variable block_length had an ambiguous role and was used as both K and
Kprime. This was leading to arrays with wrong sizes and functions with wrong
arguments. Now there is not anymore block_length but K and Kprime.
Kprime can be set with the command line argument -l.
There was also some problems with array allocation for segments with length
not divisible by 8. A proper sizing with ((size_in_bits + 7) & ~7) / 8 was
used.
A proper masking of the last byte containing payload bits was also added to
keep filler bits to 0 after random initialization.
2. fix(nrLDPC_coding): timers in DL encoding
While timers were available for rate matching and interleaving in the new
interface, these timers were not merged to rate matching and interleaving
timers in nr_dlsch_coding.
fix NTN LEO scenarios
- gNB: add support for NTN parameter ta-CommonDrift-r17
- NR UE: fix application of NTN TA information
- NR UE: add command line parameter ntn-initial-time-drift to compensate
time drift during initial sync
- NR UE: fix writeTimestamp inconsistencies
- NR UE: add MAC state UE_RECEIVING_SIB ensuring to start RA only after
successfully receiving SIBs
- rfsimulator: update earth radius for LEO simulation to match UE
position in ue.conf file
- update conf files for NTN LEO scenario
- update description how to run NTN scenarios in RUNMODEM.md
- fix: ta-Common is a round-trip-time, not a one-way delay
- NR UE: simplify calculation of next_tx_slot_and_frame by moving up
assignment of duration_rx_to_tx
- cellbarredNTN indicates notbarred in SIB1 if NTN access is available
- Removed b66 NTN and enabled B254 NTN conf file in CI
- NR UE: RRC layer now explicitly tells MAC layer when the RA procedure
can be started
- move NTN LEO config to band 254 and update doc/RUNMODEM.md
Closes#901
* The force_local flag was introduced earlier in the main CI script
in order to run a CI test locally. The flag was missing in the
Custom_Command handling, which was still targeting the node specified
in the test configuration file. With this commit, if force_local
is enabled the node for the Custom_Command is set to localhost.
E1AP enc/dec lib improvements
This MR is including some fixes and improvements for the E1AP library,
focusing mostly on Bearer Context Management:
- struct reorganization: split setup and modification request messages
into distinct structures, ensuring compliance with 3GPP TS 38.463
specifications
- add encoding/decoding sub-functions for different IEs
- improvements to Bearer Context Management: Implemented various
improvements to the E1 Bearer Context Setup Response and Request,
including the adoption of encoding/decoding sub-functions for
different IEs
- use lib functions whenever need (e.g. cp_bearer_context_setup_request
in cucp_cuup_e1ap.c)
- handle optional struct members as pointers
- updated copy/equality check utility functions
EDIT: The MR is also including the changes from !3222 (closed):
> While testing E1 with security enabled for DRBs, it was found that
> data traffic was not functional.
>
> The problem was that security settings were modified in the PDCP
> reestablishment happening when receiving Bearer Context Modification
> Request.
>
> So some restructuring was done.
>
> The actual fix is in 18176297, the others are for support. Basically
> we introduce a boolean to check if the security settings are present in
> Bearer Context Modification Request and we change PDCP security settings
> only if they are.
>
> (Note that in OAI CU security settings are not sent in Bearer Context
> Modification Request, so we could also remove all this, but we need to
> be compatible with other cu-up and/or cu-cp.)
Changes to support multiple TDD patterns
- Updated the configuration changes for 2 Patterns
- Update the TDD table configuration for NFAPI
- Added the tdd bitmap for the period
- Adapted the bitmap for UL/DL for the multi TDD pattern
- Updated the RACH procedure for multi TDD pattern
- Updated DL and UL scheduler for multi TDD pattern
Repair nFAPI in 5G
Add 5G nFAPI in OAI/Make it it work.
Many commits in this branch are basically bug fixes of things that don't work
properly, such as
- check for correct conditions (e.g. instance numbers in the RAN context)
- remove artificial limitation (e.g. only one PUCCH per TDD period in the PNF)
- improve performance (reduce big mallocs, make some static buffers such as a
global ring buffer for nFAPI messages in the PNF)
- fix bugs in nFAPI (e.g., increase maximum message size to ~64kB instead of
1500 bytes, because the latter is way too small for many TX_data.requests in
5G, and it will delay message arrival unduly)
- fix bugs in message enc/dec (e.g., handle FDD in config.request)
- adjust the L1 such that the condition "we run monolithic" is not necessery
(e.g., some message numbers in nFAPI struct where reset in MAC, instead of
L1, and this breaks when running the PNF)
There are instructions that explain how to set it up. Two CI tests have been
added, one with COTS UE and MIMO in DL+UL in TDD numerology 1 (30kHz), and a
second test with FDD mu=0 (15kHZ) in RFsimulator.
These were some old to-dos that have been addressed.
- test with COTS UE - 4x4 pipeline works good in DL, UL now also work
- test in RFsim
- make PNF status message
- make FDD in u0 work
Due to HW version differences between the CI RHEL build machine and
the FHI 7.2 test machine (cacofonix), FHI 7.2 test using RHEL image
failed, reporting an 'Illegal Instruction' error.
fhi_72: allow to provide dpdk_iova_mode to xran
- Introduce a gNB configuration option that enables users to select the
desired IOVA mode for DPDK ("PA" or "VA") with dpdk_iova_mode
parameters in fhi_72 configuration section. If not set, the default
remains PA mode to ensure backward compatibility with existing
configurations. Detailed information about IOVA modes, including their
advantages and disadvantages, can be found in the DPDK documentation:
Memory in DPDK Part 2: Deep Dive into IOVA
- Using IOVA VA mode allows DPDK to run without requiring SYS_ADMIN
capability for the docker container.
- Switch to IOVA VA mode in the FHI7.2 pipeline and reduce the required
capabilities for the docker container.
Fix yaml example config file
amf_ip_address is decoded as a paramlist_def_t and not as a paramdef_t,
so in the config file it should be a list of ip addresses
In current develop just by trying to run this config file with:
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.yaml
results in a segfault.
Config files improvements for PRACH
Some PRACH parameters in configuration files are not properly set.
- number of SSB per RACH occasion should be 1 when we have only 1 SSB
(it would still work with 1/2 but it makes little sense and might
limit UE selection of ROs).
- some PRACH configuration indices would generate PRACH conflicting with
PUCCH and therefore reducing scheduling capabilities
Further cleanup of some config files still using deprecated fields
Switching to IOVA VA mode in the FHI7.2 pipeline reduces the required
capabilities for the Docker container. This change allows the removal
of the SYS_ADMIN capability.
CI: change frequency for timing and B200-SABOX pipelines
Change center frequency of
- RAN-SA-B200-Module-SABOX-Container - 20 MHz TDD SA scenario from
3309.48 MHz to 3609.12 MHz
- RAN-gNB-N300-Timing-Phytest-LDPC - Timing phytest 40 MHz scenario from
3619.08 MHz to 3319.68 Mhz
to avoid interference between the SABOX and timing pipeline.
Robert Schmidt