Implementation of STOP exchange
This implements the STOP.request/indication for all 3 transport mechanisms, the
VNF will send the STOP.request to the PNF, indicating it will disconnect, and
await a STOP.indication from the PNF
The WLS VNF is reworked to be able to start before the PNF, by calling call
rte_eal_init and rte_dev_probe to determine if dpdk has been initialized
properly, before calling rte_eal_init in the intended process when it is
appropriate to do so
Support beam index in OAI 7.2 Fronthaul Interface
This branch supports beam index in OAI 7.2 Fronthaul Interface.
- For CP DL (PDSCH), nBeamIndex of the corresponding prbMapElm is set
when sending IQ data in oran_fh_if4p5_south_out. nBeamIndex of the
corresponding prbMapElm is set when sending IQ data in
oran_fh_if4p5_south_out.
- For CP UL (PUSCH and PRACH), nBeamIndex of the corresponding prbMapElm
is set in oran_fh_if4p5_south_out.
In addition, it fixes a couple of issues
- XRAN hardcodes nBeamIndex of PRACH to zero. Modify XRAN to support
setting of nBeamIndex of PRACH and update xran F release patch.
- Fix the bug in calculating fh_config->neAxc where num_beams_period is
multiplified twice
Testing methodology: Use Benetel O_RU for testing even though it does
not support beamforming. With successful registration and data transfer,
one could check the pcap on the fronthaul interface to see if CP packets
are with the right beam index.
Results:
1. Verified that CP-packets for SSB, DCI, PDSCH, PRACH, PDSCH, PUSCH,
CSI-RS and SRS are with the right beam index
2. Verified that there is no side-effect on Benetel O_RU. UE could
register properly.
3. Verified 4 SSB with ssb_PositionsInBurst_Bitmap = 85. Could see SSB
and PRACH with 4 different indices.
Improve MAC docs for MCS and docker for BuildKit usage
See commits for details. The first one is for fixing an omission in
!3281, the second to clarify docker build usage.
Closes: #973
build_oai primarily builds UHD for OAI. Thus, a number of targets (B100,
USRP1/2, ...) can be omitted, as OAI does not run on them. Further,
disable documentation and man pages, which is typically not necessary
for the averages user, and does not need to be installed for containers.
Similarly to the parent, don't redirect log files to a file. It makes
the CI more complicated, and also raises user awareness of what is being
installed.
Redirecting to a file has the problem that it is difficult in the CI to
recover these files. Furthermore, at least with ninja, when running
build_oai interactively, the build output will only take some lines
(because ninja rewrites lines), so the change should not be that big to
users.
One CI function would print the entire output from build_oai to the
console. Since that output might be long now, do not do this. The file
is archived, anyway.
Add a CU-UP load tester and improve GTP performance
This adds a simple tester program for the CU-UP. It sets up a number of
UEs/bearers in the CU-UP via the E1 interface, then streams data in
downlink/uplink (as seen by the CU-UP). More information is available in
tests/nr-cuup/README.md.
Includes some fixes to properly verify that SCTP is installed, and use
"the right cmake way" to use it in cmake code (see commit for details).
- Provide some documentation
- Make cmake keywards and sctp lib name lowercase
- Use standard form of find_package_handle_standard_args()
- Make an imported target sctp::sctp that will fail if being used in
cmake unless defined, which will avoid that "sctp" appears in the
cmake code but is silently discarded
See also:
https://cmake.org/cmake/help/latest/manual/cmake-developer.7.html#a-sample-find-module
Add WLS as a transport option for VNF/PNF, refactor existing options
This MR adds a new transport mechanism for the VNF and PNF split, using
the Intel WLS library, which makes use of DPDK and shared memory to
transport messages. This transport mechanism is what is used to
interface with Radisys ODU, while also working with OAI VNF/PNF.
The VNF and PNF have been refactored so that the transport-specific
functions are isolated from the rest of the logic, and as such,
interchangeable by means of function pointers.
The same change is done for the packing/unpacking procedures, allowing
to switch between FAPI and nFAPI encoding.
This MR also reduces the amount of duplicated code, by refactoring the
VNF with Aerial, which now only has the transport-relevant functions, as
well as the ones that are unique to it ( for example, the unpacking
procedures where a secondary data buffer is used for the message
payloads )
Additionally a new callback is added to the VNF to process
ERROR.indication messages, which currently only indicates which message
originated the error, and which error occurred.
Add a section in nfapi.md related to the different transport mechanisms available for VNF/PNF communication
Edit NR_NFAPI_archi.md to describe the VNF and PNF processing logic, as well as adding a flowchart for each of the components execution
Add the necessary patch to install the WLS library in the system
E release had the same issue of not using pkgconfig properly as F release.
This issue was fixed in F release when enabling its compatibility with DPDK 21+.
This commit brings this fix to E release.
In order to be usable in parallel of FHI 7.2, BBDEV devices should be included in the EAL initialization that is prformed by xran.
This commit adds a way of adding the BBDEV device from OAI.
Also fixes an issue with pkgconfig in xran.
Add physim tests into ctest framework
Convert physim testcases listed in
cmake_targets/autotests/test_case_list.xml into ctest. Note: Tests for
dlsim_tm4 are excluded, due to compilation issues.
CTest evaluates success based on return code: '0' = pass, non-zero =
fail. For some simulators, the return code is non-zero even when the
test is successful (as indicated by success messages in the test logs).
For some simulators, the return code is always '0'. This inconsistency
has been address in the first two commits of this MR.
To build and execute these tests:
- using cmake
cd openairinterface5g
mkdir build && cd build # you can also do that in cmake_targets/ran_build/build
cmake .. -GNinja -DENABLE_PHYSIM_TESTS=ON && ninja tests
ctest
- using build_oai: physim-related ctests are activated when PHY
simulators are built (use build_oai with '-P' or '--phy_simulators'
option)
cd openairinterface5g/cmake_targets
./build_oai --ninja --phy_simulators
cd ran_build/build
ctest
Link to newly created 4g and 5g RAN-Physim-Cluster pipelines:
- RAN-Physim-Cluster-4G: https://jenkins-oai.eurecom.fr/job/RAN-Physim-Cluster-4G/
- RAN-Physim-Cluster-5G: https://jenkins-oai.eurecom.fr/job/RAN-Physim-Cluster-5G/
Fix Liteon with MTU 1500 and update the FHI docs
- Closes#884 - needed to update the max fragments needed for
transmission of one symbol; technically, 5 are enough but due to wrong
equation in the xran F release we had to increase to 6
- Clarify packet length for VFs
- Update Foxconn doc and config file with MTU set for jumbo frames
- Update Benetel docs with new version v1.2.2
1. Closes#884 - increase the XRAN_MAX_FRAGMENT from 4 to 6 (sufficient for MTU 1500 with compression 8b)
2. Add new firmware version that supports jumbo frames
3. Update the config file to align with the new Liteon unit in our lab - center frequency, jumbo frames, compression and RU MAC address,
as well as the max DL MIMO layers.
The fronthaul library ships with BFP compression for AVX512 enabled targets.
This commit adds BFP compression for Arm targets by using the ArmRAL library.
Update the xran E release patch to work for Arm targets in addition to x86 targets.
Co-authored-by: Yi-Hung Chang <Yi-Hung.Chang@eurecom.fr>
Co-authored-by: brobert <brobert@valiha.com>
- cmake version 3.12 defines libxml2 module; the default path is
/usr/share/cmake-3.<sub-version>/Modules/FindLibXml2.cmake
- OAI requires minimum cmake version 3.16
Some users copy libxran.so to a system directory (e.g., /usr/local/lib).
At the same time, we require xran_LOCATION to be set to find the build
directory. Use HINTS to prefer the location passed through
xran_LOCATION.
Also, use NO_DEFAULT_PATH to outright disallow global scope, to prevent
"accidentally" finding libxran.so in global scope (this is for
multi-user systems that are used in development, and where people have
different version of libxran for testing purposes). To still use
packages in e.g., /usr/local/, it would be possible to set xran_LOCATION
to this directory. (there is a problem that the version information will
likely not be read correctly, so this might not be enough)
Fronthaul xran library update to F release (2. and final step towards M-plane integration)
- xran library support -> both E and F releases
- RU delay profile removed -> not used in neither of the releases
- DU delay profile updated
- one-way delay measurements support is improved/fixed in the F release.
However, not implemented here as it depends on the RU capabilities
Major improvements:
1) bbu_offload - enable packet handling on BBU cores
2) dlCpProcBurst - DL CP processing on one or more symbols
3) SRS CP processing - depends on the RU capabilities that can be
retreived via M-plane (if RU is CAT B)
4) nSecDesc - the number of section descriptors per symbol; it was hardcoded to 0 in E release;
depends on the RU capabilities that can be retreived via M-plane
5) RunSlotPrbMapBySymbolEnable - enable PRB mapping by symbol with multisection;
depends on the RU capabilities that can be retreived via M-plane
6) DSS (Dynamic Spectrum Sharing) support - depends on the RU capabilities that can be retreived via M-plane
Minor fixes in F that exist in E:
1) prach_config->nPrachFilterIdx - explained in commit ID f3045396
2) T1a_min_cp_dl - explained in the commit under title "Clarification on DU delay profile"
3) fh_config->nULRBs - explained in commit under title "Further clarification on xran E release parameters"
Removed const for prb_conf argument in oran_allocate_cplane_buffers()
function, as F release requires the not const struct for
xran_init_PrbMap_by_symbol_from_cfg() and xran_init_PrbMap_from_cfg()
even though the struct is not modified inside of these functions.
There are command line options that one might pass to ninja/make, but
for which cmake does not provide an interface. For instance, make/ninja
support -k/-kN to "keep going" after errors. Cmake does not provide an
option, but it is still possible to pass this. Make a build_oai option
to allow this, used in the next commit.
See e.g., egrep(1) [https://linux.die.net/man/1/egrep]:
> two variant programs egrep and fgrep are available. egrep is the same
> as grep -E. fgrep is the same as grep -F. Direct invocation as either
> egrep or fgrep is deprecated
See also the rationale of the POSIX description of grep
(https://pubs.opengroup.org/onlinepubs/9699919799/utilities/grep.html):
> This grep has been enhanced in an upwards-compatible way to provide
> the exact functionality of the historical egrep and fgrep commands as
> well. It was the clear intention of the standard developers to
> consolidate the three greps into a single command.
Closes: #839
The default values set by xran for DPDK socket memory/limit is 8192. It
is changed when the variable for the memory size, given down to xran, is
non-zero (cf also previous patch). Since the last patch, if nothing is
given in OAI configuration, OAI will pass down a size of 8192. However,
a configuration value of 0 is a valid choice (it is a pre-allocation,
DPDK will allocate dynamically), so modify the default in xran to be 0
so that all sizes, including 0, can be given to DPDK.
Note that the currently used implementation of xran will always try to
allocate this memory on NUMA node 0. If you want to use another one,
this field has to be set to 0 (no pre-allocation), and DPDK will
allocate it dynamically.
Co-authored-by: Sagar Arora <sagar.arora@openairinterface.org>
Build on ARM fails in the previous version, while the current master
(1a09d3bc) works. So let's update to a newer version to avoid problems
on ARM, and assuming x86 works.
Jaroslava Fiedlerova