PDU Session Release
This MR implements end-to-end PDU Session Release functionality
according to 3GPP TS 38.413 and TS 38.331 specifications.
Reason for Change Previous implementation had incomplete and wrongly
places tunnel cleanup during PDU session release. UP cleanup shall be
done at CUUP, RRCReconfiguration shall be sent after retrieval of
updated CellGroupConfig from the DU. This implies F1 and E1 exchanges
during PDU session release procedure.
Major Changes:
1. RRC PDU Session Release: DRBs and PDU session teardown in NGAP PDU
Session Release Response callback
- Helper Functions: Introduced rm_pduSession,
find_drb_by_pdusession_id and rm_drbs() helpers to locate and clean
up DRBs linked to a specific PDU session
- Targeted Cleanup: RRC PDU Session and per-session DRB removal in
rrc_gNB_send_NGAP_PDUSESSION_RELEASE_RESPONSE()
- Status Cleanup: Removed unused PDU_SESSION_STATUS_RELEASED status
2. RRC PDU Session Release: Refactor
rrc_gNB_process_NGAP_PDUSESSION_RELEASE_COMMAND
- Any PDU session in the pdusession_release_params list that is
present in the RRC list can be set to release, regardless of its
status
- Function Signature Update: Updated function signature and other
minor changes
- Response Handling: rrc_gNB_send_NGAP_PDUSESSION_RELEASE_RESPONSE is
sent upon completion of RRCReconfiguration
3. RRC PDU Session Release: add missing procedures E1AP Integration:
- Populates E1AP Bearer Modification for each to be released session
- PDCP Enhancement: Added nr_pdcp_release_drbs() to remove all DRBs
linked to a given PDU session in CUUP
- GTP-U Cleanup: GTP tunnel teardown handled in CUUP
e1_bearer_context_modif() using correct F1 or N3 GTP instance
4. NR PDCP/GTP:
- Enhanced Tunnel Deletion Logic: Separate handling for N3 tunnels (1
per PDU session) and F1-U tunnels (1 per DRB)
- New PDCP API Function: Added nr_pdcp_get_drb_ids_for_pdusession()
function to retrieve all DRB IDs associated with a specific PDU
session
5. RRC PDU Session Release: F1AP-based UE Context Modification:
- Replaced direct RRC message transfer with F1AP UE Context
Modification Request for proper retrieval from DU
- Cell Group Configuration: handling of updated CellGroupConfig from
DU ensures DRB release at CU
6. Docs and testing:
- Added PDU session add/remove test cases to 25 PRB RFSIM pipeline
- Documentation: Added PDU Session Release sequence diagram
- Telnet Commands: Added ci command to trigger NGAP PDU Session
Release and ciUE command to trigger establishment of a new PDU
Session
7. Additional fixes:
- UE RLC Management: ensure release of RLC entities
- Unify NG delay control before calling the RRC NGAP handler, for both
Setup and Release
8. Code Cleanup: Cleaned up unused GTP teardown functions.
Closes#867
This commit introduces a new telnet server command `pdu_session_release` to
manually trigger the NGAP PDU Session Release Command message from the telnet ci shell.
This is useful for integration testing of PDU session teardown behavior.
Details:
- Added `trigger_ngap_pdu_session_release()` to send NGAP_PDUSESSION_RELEASE_COMMAND
to the RRC task, targeting the specified `gNB_ue_ngap_id`.
- The command currently releases PDU session ID 10 (hardcoded).
- Hooked into telnet shell with command: `pdu_session_release [gNB_ue_ngap_id]`
Usage example:
telnet > pdu_session_release 1
DL stats (aggregated total and used PRBs) previosuly used only for O1 interface,
now finds the purpose for E2 interface as well.
New UL stats (aggregated total and used PRBs) serve for E2 interface only.
Co-authored-by: Teodora Vladić <teodora.vladic@openairinterface.org>
These libraries depend on the logging module, so add the right
dependency log_headers. Indirectly, this will fulfill the condition of
T. I consider the prior usage of generate_T or {T_LIB} incorrect,
because basically none of these libraries actually, actively use T, but
rather only the logging module, which pulls in T. The dependency of
log_headers will also take care of generating and including T headers,
which is a dependency of the logging module.
For conf2uedata and related, fulfill the dependency
through conf2uedata_lib (on which the rest depends).
* the command gets in input the neighbour PCI and the UE ID
* the telnet ci function to retrieve the UE context was extended in the process
* add function to trigger handover on the same gNB for testing purposes
Co-authored-by: batuhan duyuler <batuhan.duyuler@firecell.io>
- Use MAX_NUM_NR_UE_INST in NR UE MAC to control number of MAC instances.
- Modify the MAC interface slightly so that nr_l2_init_ue only initializes one instance
A number of radio-related RRC parameters, e.g., CellGroupConfig,
"originate" at the DU and are sent to the CU for forwarding to the UE
only. Similarly, there are additional parameters, e.g., RLC-BearerConfig
(part of CellGroupConfig), that originate at the DU.
Hence, the DU decides about these parameters, depending on the MAC state
and capabilities. To clarify this, move the existing
openair2/RRC/NR/nr_rrc_config.{c,h} => openair2/LAYER2/NR_MAC_gNB/nr_radio_config.{c,h}
So that developers know that while those are RRC parameters, they
originate at the DU.
In other words, the CU/RRC is not supposed to use any of these functions
in the RRC. Correspondingly, includes of this file have been cleaned up
(and when they are not necessary at the MAC as well).
The parent commit cleans up and groups oai_exit in one place,
nr-softmodem-common.h. Therefore, this 5G file is included in the 4G
defs_common.h (at least it's mostly 4G), which is not nice. Instead,
define oai_exit also in 4G softmodem-common.h, and include this in
defs_common.h. Remove the cyclic inclusion of defs_common.h in
softmodem-common.h, and resolve all subsequent errors around unknown
types and extern definition mismatches.
This adds a basic telnet module to support the O1 interface at the DU,
to be used together with the oai/o1-adapter>. Concretely, this first
version supports to
- read/modify cell parameters
- stop/start the L1
- removed some whitespace noise.
- cleaned up CMakeLists.txt
- reintegrated task_manager.c into thread-pool.c
- cleaned up some unnecessary code
Co-authored-by: Cedric Roux <cedric.roux@eurecom.fr>
Co-authored-by: Mikel Irazabal <mikel.irazabal@openairinterface.com>
Implement run-to-completion for processSlotTX. This is achieved by using a new
dynamic_barrier_t which allows to specify callback after the first join has been
made.
Set SA mode as default
- Set standalone (SA) mode as the default.
- Adjust commands in Docker Compose files by removing --sa flags and
adding --nsa flags where applicable.
- Add a function to verify that only one mode is being used at a time.
- Update all relevant documentation.
telnetsrv uses the Intel/AMD-specific "cpuid" instruction, which is not
available on ARM machines. Remove the call.
The previous code was checking for the number of cores, which is
retained by a call to get_nprocs(). I did not find an equivalent for the
number of threads in C. In C++, there would be
https://en.cppreference.com/w/cpp/thread/thread/hardware_concurrency, in
case it's relevant for anybody.
Before this commit, the following will trigger a complete rebuild:
- create another git name (git checkout -b test)
- run cmake again manually (cmake ..)
- run ninja again
The top-level CMakeLists.txt uses add_definitions() to add git
information to all targets; if some git information changes, this will
mark all command lines as dirty, triggering the build.
There is an easy solution: instead of passing this information on the
command line, pass it in a header. This commit uses configure_file() to
generate a file oai_version.h in the build directory with the same
information. Various sources files, e.g., main executables, use this to
output the same information as before. It is then also not necessary to
use header guards, as cmake takes care to create this file.
If cmake is re-run, it will update the header, and trigger only files
including this header will be rebuilt (which can be shown with the above
stpes). The information passed is the same as before, and updates the
information when the old method would have updated it.
The function rrc_gNB_process_RRCReconfigurationComplete() does almost
nothing, we can delete it.
The variable name ue_reconfiguration_after_reestablishment_counter is
misleading, as it counts all reconfigurations; rename to make it clear.
Robert Schmidt